Japanese DTV uses some non standard extensions in AAC audio.
One example is 'dual mono', which combines two independent
audio into one stereo stream, storing them in left and right channels
respectively. Historically, dual mono audio has been used for
multi-lingual audio, one for local/native language, and another for english,
and usually the "main" (local language) channel should be output without
any user interactions.
The frames of those dual mono audio are allowed to set
ADTS channel_config field to 0, and just contain two SCE's *WITHOUT* PCE,
which is a non standard extension by Japanese DTV standard.
(ref. ARIB STD-B32 PartII 5.2.3)
This patch adds an AVPacket side data, AV_PKT_DATA_JP_DUALMONO,
which indicates that the AVPacket is likely to contain an audio frame
with the above dual mono extension, and has the parameter to specify
the desired channel selection in that case.
It also makes aacdec to detect dual mono and output just the desired
channel when this side data is attached.
Signed-off-by: Akihiro Tsukada <atsukada@users.sourceforge.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is a remaining error of 2 - 8 samples in some but not all cases,
the source of the error is unknown ATM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo: reduce excessive inlining of mpeg_motion()
mpegvideo: convert mpegvideo_common.h to a .c file
build: factor out mpegvideo.o dependencies to CONFIG_MPEGVIDEO
Move MASK_ABS macro to libavcodec/mathops.h
x86: move MANGLE() and related macros to libavutil/x86/asm.h
x86: rename libavutil/x86_cpu.h to libavutil/x86/asm.h
aacdec: Don't fall back to the old output configuration when no old configuration is present.
rtmp: Add message tracking
rtsp: Support mpegts in raw udp packets
rtsp: Support receiving plain data over UDP without any RTP encapsulation
rtpdec: Remove an unused include
rtpenc: Remove an av_abort() that depends on user-supplied data
vsrc_movie: discourage its use with avconv.
avconv: allow no input files.
avconv: prevent invalid reads in transcode_init()
avconv: rename OutputStream.is_past_recording_time to finished.
Conflicts:
configure
doc/filters.texi
ffmpeg.c
ffmpeg.h
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/mpegvideo.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpc8: return more meaningful error codes.
mpc: return more meaningful error codes.
wv,mpc8: don't return apetag data in packets.
rtmp: do not warn about receiving metadata packets
x86: h264dsp: Adjust YASM #ifdefs
x86: yadif: Mark mmxext optimizations as such
h264: convert loop filter strength dsp function to yasm.
Improve descriptiveness of a number of codec and container long names
Conflicts:
libavcodec/flvdec.c
libavcodec/libopenjpegdec.c
libavformat/apetag.c
libavformat/mp3dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add credit/copyright to librtmp authors for parts of the RTMPE code
rtmp: Move the CONFIG_ condition into the if conditions
aac: Mention abbreviation as well in long_name
build: Skip compiling rtmpdh.h if ffrtmpcrypt protocol is not enabled
doc: Add Git configuration section
configure: Add a dependency on https for rtmpts
rtp: Only choose static payload types if the sample rate and channels are right
Conflicts:
doc/git-howto.texi
libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asfdec: read attached pictures.
apetag: reindent
apetag: export attached covers as video streams.
apetag: fix the amount of data read from binary tags.
apetag: make sure avio_get_str() doesn't read more than it should.
mov: read itunes cover art.
snow: remove VLA in mc_block()
intfloat: Don't use designated initializers in the public headers
snow: remove a VLA.
doc: Remind devs to check return values, especially for malloc() et al
MS ATC Screen (aka MSS3) decoder
vf_yadif: move x86 init code to x86/yadif.c
vf_gradfun: move x86 init code to x86/gradfun.c
roqvideo: Remove a totally unused dspcontext
smacker: remove some unused code
dsicin: remove dead assignment
aacdec: remove dead assignment
rl2: remove dead assignment
proresenc: make a variable local to the loop where it is used
alsdec: remove dead assignments
Conflicts:
Changelog
doc/developer.texi
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavfilter/gradfun.h
libavfilter/x86/gradfun.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The decoder configuration initializes the sbr mdct, which needs to know about the sample format to properly take the scale factor into account.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
float_dsp: ppc: add a separate header for Altivec function prototypes
ARM: fix float_dsp breakage from d5a7229
Add a float DSP framework to libavutil
PPC: Move types_altivec.h and util_altivec.h from libavcodec to libavutil
ARM: Move asm.S from libavcodec to libavutil
vc1dsp: mark put/avg_vc1_mspel_mc() always_inline
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vorbis: Validate that the floor 1 X values contain no duplicates.
avprobe: Identify codec probe failures rather than calling them unsupported codecs.
avformat: Probe codecs at score 0 on buffer exhaustion conditions.
avformat: Factorize codec probing.
Indeo Audio decoder
imc: make IMDCT support stereo output
imc: move channel-specific data into separate context
lavfi: remove request/poll and drawing functions from public API on next bump
lavfi: make avfilter_insert_pad and pals private on next bump.
lavfi: make formats API private on next bump.
avplay: use buffersrc instead of custom input filter.
avtools: move buffer management code from avconv to cmdutils.
avconv: don't use InputStream in the buffer management code.
avconv: fix exiting when max frames is reached.
mpc8: fix maximum bands handling
aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.
Conflicts:
Changelog
cmdutils.h
ffmpeg.c
ffplay.c
ffprobe.c
libavcodec/avcodec.h
libavcodec/mpc8.c
libavcodec/v210dec.h
libavcodec/version.h
libavcodec/vorbisdec.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/buffersrc.c
libavfilter/formats.c
libavfilter/src_movie.c
libavfilter/vf_aspect.c
libavfilter/vf_blackframe.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_cropdetect.c
libavfilter/vf_delogo.c
libavfilter/vf_drawbox.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_fifo.c
libavfilter/vf_format.c
libavfilter/vf_frei0r.c
libavfilter/vf_gradfun.c
libavfilter/vf_hflip.c
libavfilter/vf_hqdn3d.c
libavfilter/vf_libopencv.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_showinfo.c
libavfilter/vf_transpose.c
libavfilter/vf_unsharp.c
libavfilter/vf_yadif.c
libavfilter/vsrc_color.c
libavfilter/vsrc_testsrc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes passing junk in stream.
It should not have any user vissible effect.
We are discarding the new data in the decoder as no case is known
where it is needed but it causes problems if used.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: remove AVCodecContext.dsp_mask
avconv: fix a segfault when default encoder for a format doesn't exist.
utvideo: general cosmetics
aac: Handle HE-AACv2 when sniffing a channel order.
movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
xxan: Remove write-only variable in xan_decode_frame_type0().
ivi_common: Initialize a variable at declaration in ff_ivi_decode_blocks().
Conflicts:
ffmpeg.c
libavcodec/utvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
aacenc: Fix issues with huge values of bit_rate.
dv_tablegen: Drop unnecessary av_unused attribute from dv_vlc_map_tableinit().
proresenc: multithreaded quantiser search
riff: use bps instead of bits_per_coded_sample in the WAVEFORMATEXTENSIBLE header
avconv: only set the "channels" option when it exists for the specified input format
avplay: update get_buffer to be inline with avconv
aacdec: More robust output configuration.
faac: Fix multi-channel ordering
faac: Add .channel_layouts
rtmp: Support 'rtmp_playpath', an option which overrides the stream identifier
rtmp: Support 'rtmp_app', an option which overrides the name of application
avutil: add better documentation for AVSampleFormat
Conflicts:
libavcodec/aac.h
libavcodec/aacdec.c
libavcodec/aacenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Save the old output configuration (if it has been used
successfully) when trying a new configuration. If the new configuration
fails to decode, restore the last successful configuration.
When decoding LATM, this function will not process extradata
but a different buffer.
It seems this was forgotten to update when LATM support
was added.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
asfdec: Add an option for not searching for the packet markers
cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
cosmetics: Align codec declarations
cosmetics: Convert mimic.c to utf-8
avconv: remove an unused function parameter.
avconv: remove now pointless variables.
avconv: drop support for building without libavfilter.
nellymoserenc: fix crash due to memsetting the wrong area.
libavformat: Only require first packet to be known for audio/video streams
avplay: Don't try to scale timestamps if the tb isn't set
Conflicts:
Changelog
configure
ffmpeg.c
libavcodec/aacenc.c
libavcodec/bmpenc.c
libavcodec/dnxhddec.c
libavcodec/dnxhdenc.c
libavcodec/ffv1.c
libavcodec/flacenc.c
libavcodec/fraps.c
libavcodec/huffyuv.c
libavcodec/libopenjpegdec.c
libavcodec/mpeg12enc.c
libavcodec/mpeg4videodec.c
libavcodec/pamenc.c
libavcodec/pgssubdec.c
libavcodec/pngenc.c
libavcodec/qtrleenc.c
libavcodec/rawdec.c
libavcodec/sgienc.c
libavcodec/tiffenc.c
libavcodec/v210dec.c
libavcodec/wmv2dec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also break some long lines, remove codec function placeholder comments
and add spaces in sample/pixel format lists.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
fate: make compare() function compatible with POSIX bc
Update Janne's email address.
APIchanges: Replace Subversion revision numbers by Git hashes.
bytestream: Eliminate one level of pointless macro indirection.
xwd: convert to bytestream2.
vqavideo: port to bytestream2 API
Read preset files with suffix .avpreset
prores: allow user to set fixed quantiser
lavf: remove some disabled code.
lavf: only set average frame rate for video.
lavf: remove a pointless check.
avcodec: add XBM encoder
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vqavideo.c
libavformat/img2enc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fix a bunch of common typos.
build: Skip compiling xvmc.h under the correct condition.
configure: darwin: Change dylib install names to include major version.
mpegts: Always honor a registration descriptor if present and there is no other codec information.
aacdec: Fix SCE parity check.
aacdec: Fix out of array writes (stack).
rtsp: Only set the ttl parameter if the server actually gave a value
udp: Set ttl for read-write streams, too, not only for write-only ones
udp: Only bind to the multicast address if in read-only mode
udp: Clarify the comment about binding the multicast address
udp: Reorder comments
Conflicts:
libavcodec/aacdec.c
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
An unpaired SCE preceding a CPE only makes sense for front SCEs
preceding the first CPE.
Split from FFmpeg commit a8d67efa53
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Set the element to channel vector (e2c_vec) size to be the maximum
number of aac channel elements. This makes it slightly larger than it
needs to be because CCEs are never mapped to output channel locations.
Also add a check that all input tags (legal or not) will fit.
Split from FFmpeg commit a8d67efa53
Signed-off-by: Alex Converse <alex.converse@gmail.com>
This fixes an issue in the code to check the size that will
be written to match the actual code writing. In the long
term it would make sense to change this so the counting and
writing code are the same so they dont need to be kept in sync.
It also increases the array size, which was too small either way
and adds a redudnant saftey check.
This issue does not affect any FFmpeg release as it has been
introduced Jan 31 which is narrowly after our last release.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>