Add list extended format which specifies in the list file the start and
ending time for each segment. This is required to make it available this
information to external tools, avoiding the need to perform file analysis
in the output segments.
* qatar/master: (29 commits)
lavfi: reclassify showfiltfmts as a TESTPROG
graph2dot: fix printf format specifier
swscale: yuv2planeX 8bit >=sse2 functions need aligned stack on x86-32.
vp8: loopfilter >=sse2 functions need aligned stack on x86-32.
amr: remove shift out of the AMR_BIT() macro.
dsputilenc: group yasm and inline asm function pointer assignment.
mov: use forward declaration of a function instead of a table.
Clarify Doxygen comment for FF_API_* #defines.
configure: simplify get_version()
Create version.h headers for libraries that lack them
gitignore: Use full path instead of relative path to specify patterns
mpegvideo: remove VLAs
Add XTEA encryption support in libavutil
Add Blowfish encryption support in libavutil
eval: Add the isinf() function and tests for it
flacdec: move lpc filter to flacdsp
flacdec: split off channel decorrelation as flacdsp
avplay: Add an option for not limiting the input buffer size
FATE: add a test for WMA cover art.
FATE: add a test for apetag cover art
...
Conflicts:
.gitignore
configure
ffplay.c
libavcodec/Makefile
libavcodec/error_resilience.c
libavcodec/mpegvideo.c
libavcodec/ratecontrol.c
libavdevice/avdevice.h
libavfilter/Makefile
libavfilter/filtfmts.c
libavfilter/version.h
libavformat/mov.c
libavformat/version.h
libavutil/Makefile
libavutil/avutil.h
libavutil/version.h
libswscale/swscale.h
libswscale/x86/swscale_mmx.c
tests/fate/libavutil.mak
tests/lavfi-regression.sh
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cosmetics: Consistently use C-style comments with multiple inclusion guards
anm: fix a few Doxygen comments
misc typo and wording fixes
attributes: add av_noreturn
attributes: drop pointless define guards
configure: do not disable av_always_inline with --enable-small
flvdec: initial stream switch support
avplay: fix write on freed memory for rawvideo
snow: remove a VLA used for edge emulation
x86: lavfi: fix gradfun/yadif build with mmx/sse disabled
snow: remove the runs[] VLA.
snow: Check mallocs at init
flacdec: remove redundant setting of avctx->sample_fmt
Conflicts:
ffplay.c
libavcodec/h264.c
libavcodec/snow.c
libavcodec/snow.h
libavcodec/snowdec.c
libavcodec/snowenc.c
libavformat/flvdec.c
libavutil/attributes.h
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This simplifies usage for segment streaming formats with no global
headers, tipically MPEG 2 transport stream "ts" files.
The seg class duplication is required in order to avoid an infinite loop
in libavformat/utils.c:format_child_next_class().
* qatar/master:
fix hardcoded tables compililation caused by missing math constants
lavf: Make codec_tag arrays constant
twinvq: give massive struct a name.
lavf, lavu: version bumps and APIchanges for av_gettime() move
lavfi/audio: don't set cur_buf in ff_filter_samples().
lavfi/fifo: add audio version of the fifo filter.
fifo: fix parenthesis placement.
lavfi: rename vf_fifo.c -> fifo.c
lavc: remove stats_in from AVCodecContext options table.
Conflicts:
doc/APIchanges
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/audio.c
libavfilter/fifo.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MS Screen 1 decoder
aacdec: Fix popping channel layouts.
av_gettime: support Win32 without gettimeofday()
Use av_gettime() in various places
Move av_gettime() to libavutil
dct-test: use emms_c() from libavutil instead of duplicating it
mov: fix operator precedence bug
mathematics.h: remove a couple of math defines
Remove unnecessary inclusions of [sys/]time.h
lavf: remove unnecessary inclusions of unistd.h
bfin: libswscale: add const where appropriate to fix warnings
bfin: libswscale: remove unnecessary #includes
udp: Properly check for invalid sockets
tcp: Check the return value from getsockopt
network: Use av_strerror for getting error messages
udp: Properly print error from getnameinfo
mmst: Use AVUNERROR() to convert error codes to the right range for strerror
network: Pass pointers of the right type to get/setsockopt/ioctlsocket on windows
rtmp: Reduce the number of idle posts sent by sleeping 50ms
Conflicts:
Changelog
configure
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dct-test.c
libavcodec/version.h
libavformat/riff.c
libavformat/udp.c
libavutil/Makefile
libswscale/bfin/yuv2rgb_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add a new option 'rtmp_flush_interval' that allows specifying the
number of packets to write before sending it off as a HTTP request.
This is mostly relevant for RTMPT - for plain RTMP, it only controls
how often we check the socket for incoming packets, which shouldn't
affect the performance in any noticeable way.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
lavr: add x86-optimized functions for mixing 1-to-2 s16p with flt coeffs
lavr: add x86-optimized functions for mixing 1-to-2 fltp with flt coeffs
Add Dolby/DPLII downmix support to libavresample
vorbisdec: replace div/mod in loop with a counter
fate: vorbis: add 5.1 surround test
rtpenc: Allow requesting H264 RTP packetization mode 0
configure: Sort the library listings in the help text alphabetically
dwt: remove variable-length arrays
RTMPT protocol support
http: Properly handle chunked transfer-encoding for replies to post data
http: Fail reading if the connection has gone away
amr: Mark an array const
amr: More space cleanup
rtpenc: Fix memory leaks in the muxer open function
Conflicts:
Changelog
configure
doc/APIchanges
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This requires all NAL units to fit within single RTP packets. It
doesn't change the actual packetization for packets that fit, but
errors out and gives a helpful hint if the NAL units would have to
be split, and signals the right packetization mode in the SDP.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPT protocol implementation uses rtmphttp:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
opt: Add av_opt_set_bin()
avconv: Display the error returned by avformat_write_header
rtpenc_chain: Return an error code instead of just a plain pointer
rtpenc_chain: Free the URLContext on failure
rtpenc: Expose the ssrc as an avoption
avprobe: display the codec profile in show_stream()
avprobe: fix function prototype
cosmetics: Fix indentation
avprobe: changelog entry
avprobe: update documentation
avprobe: provide JSON output
avprobe: output proper INI format
avprobe: improve formatting
rtmp: fix url parsing
fate: document TARGET_EXEC and its usage
Conflicts:
doc/APIchanges
doc/fate.texi
doc/ffprobe.texi
ffprobe.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use codec aspect ratio for frame aspect ratio if AVFrame is NULL.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Guesses the sample aspect ratio of a frame, based on both the stream and the
frame aspect ratio.
Since the frame aspect ratio is set by the codec but the stream aspect ratio
is set by the demuxer, these two may not be equal. This function tries to
return the value that you should use if you would like to display the frame.
Basic logic is to use the stream aspect ratio if it is set to something sane
otherwise use the frame aspect ratio. This way a container setting, which is
usually easy to modify can override the coded value in the frames.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
avconv: free packet in write_frame() when discarding due to frame number limit
FATE: use +/- flag option syntax for vp8 emu-edge tests
lavf: make av_interleave_packet_per_dts() private.
lavf: deprecate av_read_packet().
oggdec: output correct timestamps for Vorbis
avconv: pass input stream timestamps to audio encoders
lavc: shrink encoded audio packet size after encoding.
xa: set correct bit rate
xa: do not set bit_rate, block_align, or bits_per_coded_sample
xa: fix end-of-file handling
xa: fix timestamp calculation
bink: fix typo in FFALIGN() argument
bink: align plane width to 8 when calculating bundle sizes
doc: pass -Idoc texi2html and texi2pod
doc: texi2pod: add -I flag
movenc: Add a min_frag_duration option
rtsp: Set the default delay to 0.1 s for the RTSP/SDP/RTP demuxers
libavformat: Set the default for the max_delay option to -1
Generate manpages for AV{Format,Codec}Context AVOptions.
doc/avconv: remove entries for AVOptions.
...
Conflicts:
doc/Makefile
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/options.c
libavcodec/vp8.c
libavformat/options.c
tests/fate/demux.mak
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
CDXL demuxer and decoder
hls: Re-add legacy applehttp name to preserve interface compatibility.
hlsproto: Rename the functions and context
hlsproto: Encourage users to try the hls demuxer instead of the proto
doc: Move the hls protocol section into the right place
libavformat: Rename the applehttp protocol to hls
hls: Rename the functions and context
libavformat: Rename the applehttp demuxer to hls
rtpdec: Support H263 in RFC 2190 format
rv30: check block type validity
ttadec: CRC checking
movenc: Support muxing VC1
avconv: Don't split out inline sequence headers when stream copying VC1
rv34: handle size changes during frame multithreading
rv40: prevent undefined signed overflow in rv40_loop_filter()
rv34: use AVERROR return values in ff_rv34_decode_frame()
rv34: use uint16_t for RV34DecContext.deblock_coefs
librtmp: Add "lib" prefix to librtmp URLProtocol declarations.
movenc: Use defines instead of hardcoded numbers for RTCP types
smjpegdec: implement seeking
...
Conflicts:
Changelog
doc/general.texi
libavcodec/avcodec.h
libavcodec/rv30.c
libavcodec/tta.c
libavcodec/version.h
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Keep the old protocol name around for backwards compatibility
until the next bump.
Deprecate the method of implicitly assuming the nested protocol.
For applehttp://server/path, it might have felt logical, but
supporting hls://server/path isn't quite as intuitive. Therefore
only support hls+http://server/path from now on.
Using this protocol at all is discouraged, since the hls demuxer
is more complete and fits into the architecture better. There
have been cases where the protocol implementation worked better
than the demuxer, but this should no longer be the case.
Signed-off-by: Martin Storsjö <martin@martin.st>
