This allows selecting if the demuxer should consider all streams to be
found after the first PMT and add further streams during decoding or if it rather
should scan all that are within the analyze-duration and other limits
Fixes Ticket3762
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way if we by chance run into a valid PMT we have a more complete
set of streams, also do not reset streams in case we run into a worse
PMT
Fixes Ticket4046
alternatively Ticket4046 could be closed as invalid or wontfix as it contains
some PMTs which lack the 2 subtitle streams
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add the judement after create a new program to avoid segment fault.
Signed-off-by: Di Wu <di1028.wu@samsung.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: signal_sigsegv_844d59_10_signal_sigsegv_a17bb7_366_mpegts_mpeg2video_mp2_dvbsub_topfield.rec
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The were wrongly being exported and used by libavdevice
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AVFormatContext->priv_data is not always a MpegTSContext, it can be
RTSPState when decoding a RTP stream. So it is necessary to pass
MpegTSContext pointer explicitly.
Within libav, the write_section_data function doesn't actually use
the MpegTSContext at all, so this doesn't change anything at the
moment (no memory was corrupted before), but it reduces the risk of
anybody trying to touch the MpegTSContext via AVFormatContext->priv_data
in the future.
Signed-off-by: Martin Storsjö <martin@martin.st>
AVFormatContext->priv_data is not always a MpegTSContext, it can be
RTSPState when decoding a RTP stream. So it is necessary to pass
MpegTSContext pointer explicitly.
This fixes memory corruption from bug #3721 (RTSPState is smaller than
MpegTSContext thus innocent memory gets overwritten).
Signed-off-by: Alexander V. Lukyanov <lavv17f@gmail.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I don't think this can acutally happen in the current code, but better safe
than sorry.
Fixes Coverity CID 732217.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '5397386effba2e53e4ff82852a86f6be4d59e9c1':
mathops: move macro to the only place it is used
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f65afef1df.
If only pts is coded then dts must be equal pts
See Rec. ITU-T H.222.0 (06/2012) / ISO/IEC 13818-1:2013 (E) 2.7.5
Found-by: Baptiste Coudurier
We cannot easily determine if an mpeg TS's packet size is DVHS, FEC
or so on, for that we need to expose the internal raw_packet_size
field.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Copy multiple languages data from PMT to extradata. New 5 bytes
per language extradata format.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This (ugly) hack fixes Ticket3348
If someone has an idea on how to fix this nicer, that would be very welcome
but the stream contains several PMTs with just one of the 2 streams at the start
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* Using extradata by TS demuxer to store values from PMT
* Support of multiple languages in one DVB teletext stream:
comma separated language codes in metadata "language" field
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Used in some HLS streams ("Timed Metadata for HTTP Live Streaming").
This is just ID3 tags at arbitrary stream positions, but I still added
"timed" to the codec name to avoid confusion with regular non-stream ID3
tags.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
We cannot easily determine if an mpeg TS's packet size is DVHS, FEC
or so on, for that we need to expose the internal raw_packet_size
field.
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This disables NOHEADER after finding PMT for all programs to
avoid find_stream_info always exhausting probe size for mpegts.
This is very important for live streams since read speed
will be limited. rtsp, udp and any protocol streaming a live
mpegts will have dramatically faster startup time.
Note, lack of codec parameters for streams can still cause
the full probe size to be exhausted.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The seek ended up seeking before the begin, which caused problems
Fixes initial sync issues with libbluray
Fixes Ticket3117
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an infinite loop
An alternative fix would be to revert d73cbc22c5
but that would worsen error resilience.
Found-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids the loss of a packet in many cases if the packet size was wrong.
It also improves detection of packet size changes
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No case is known to have triggered this, but its more correct to check that the
new size differs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This provides at least some protection against potential accidental
corruption of AVIO buffer workspace.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c84ea750cf765c9d8845fca5546eb0ae25b9c855':
mpegts: Make discard_pid() faster for single-program streams
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cabb1681697555e2c319c37c1f30f149207e9434':
mpegts: Remove one memcpy per packet
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Changes since v1 of the patch:
- enable option by default
- add documentation
- move up PTS override code after PES header parsing, to ensure we use the
last PCR before the first packet of the teletext PES packet.
The option overrides teletext packet PTS and DTS values with the timestamps
calculated from the PCR of the first program which the teletext stream is part
of and is not discarded.
Using the same teletext PID for multiple programs is possible, therefore we
need some kind of heuristics to know which program PCR we should synchronize
to. Using the first non-discarded PCR pid among the programs of the teletext
stream seemed like a good choice.
The patch does not do PCR interpolation to estimate the PCR of the teltetext
packet, it just uses the last PCR of the program, which may cause a slight
error (0.1 sec) in the teletext packet pts-es.
Based on a patch by Reimar Döffinger.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-September/131610.html
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The common case of the pointer having increased by one packet (which results
in no change to the modulus) can be detected with a 64-bit subtraction,
which is far cheaper than a division on many platforms.
Before After
Mean StdDev Mean StdDev Change
Divisions 248.3 8.8 51.5 7.4 +381.7%
Overall 2773.2 25.6 2372.5 43.1 +16.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
When a stream contains a single program, there's no point in doing a
PID -> program lookup. Normally the one and only program isn't disabled,
so no packets should be discarded.
Before After
Mean StdDev Mean StdDev Change
discard_pid() 73.8 9.4 20.2 1.5 +264.8%
Overall 2300.8 28.0 2253.1 20.6 +2.1%
Signed-off-by: Martin Storsjö <martin@martin.st>
This was being performed to ensure that a complete packet was held in
contiguous memory, prior to parsing the packet. However, the source buffer
is typically large enough that the packet was already contiguous, so it is
beneficial to return the packet by reference in most cases.
Before After
Mean StdDev Mean StdDev Change
memcpy 720.7 32.7 649.8 25.1 +10.9%
Overall 2372.7 46.1 2291.7 21.8 +3.5%
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b164d66e35d349de414e2f0d7365a147aba8a620':
ape: make version-dependent decoding functions called via pointers
mpegts: add support for stream_type 0x42, which is CAVS
Merged-by: Michael Niedermayer <michaelni@gmx.at>
