The macro hell sometimes make it difficult to trace the source of
an error, so it is easier to analyze the preprocessed output.
This patch makes this automatical by specifying DBG=1 on the
command line: a file ffmpeg/dir/file.asm gets preprocessed to
builddir/dir/file.dbg.asm, which is then compiled.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'faa8ffda2c513573733624784f0a7d0a4959d33e':
doc/APIchanges: fill in missing dates and hashes
Conflicts:
doc/APIchanges
See: c651a1aaec
See: 8c8ee17e8d and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is necessary, because avcodec_decode_video2 can change
width, height and/or pixel format of the AVCodecContext. Since
video_dst_data and video_dst_linesize are not updated by calling
av_image_alloc again, av_image_copy[_plane] asserts, because the
destination buffer is too small.
In this case, creating a useable rawvideo is not possible anyway, since
it has fixed width/height/pix_fmt.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This adds an option to set the service type in mpegts as defined in ETSI 300 468.
I added what I believe are the most useful service types as pre defined values,
the others can be sent by using their hexdecimal form directly (e.g. -mpegts_service_type digital_radio, -mpegts_service_type 0x07).
I've been using this patch in order to pipe internet radio stream (originally as HLS/m3u8) from ffmpeg to tvheadend,
when the service type set right tvheadend recognize the mpegts stream as a radio channel.
The patch in its original form was written by linuxstb from freenode's hts channel which allowed me pushing it upstream.
This close issue 4118.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Theis makes the build binary reproducible.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f726fc21ef76a8ba3445448066f7b2a687fbca16':
ogg: Provide an option to offset the serial number
Conflicts:
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '728685f37ab333ca35980bd01766c78d197f784a':
Add a side data type for audio service type.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/version.h
libavutil/frame.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3a70c0c95feacb3844d05eebd579fc8189a77eee':
examples/transcode_aac: generate proper PTS and set the muxer timebase
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '749a89d1b8bb73b4d4f14c48f33259a1300c1761':
examples/transcode_aac: properly select the output sample format
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* rdp/dshow_tv_tuner:
dshow: tweak logging
dshow: crossbar dialog was frequently being displayed twice, split up option so it can be just once
dshow: alert as to ramifications of switching crossbar routing
dshow: add properties dialog for tv tuners
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* rdp/dshow_crossbar:
dshow: fix docu escapes
dshow: some devices only list themselves under "Video sources" but actually have both video and audio output pins, so make the audio pins accessible by video source name.
dshow: add options for allowing filter popup configuration dialogs to be presented to the user
dshow: introduce support for crossbar [multiple input selectable] devices
dshow: drop initial audio packets with weird timestamps
dshow: use non deprecated api
dshow: miscellaneous tweaks
dshow: allow selecting devices by an alternative name (workaround for devices with symbols in them), allow specifying capture pins by name and alternative (unique) name
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It's better to steer users at these, since they are both better
and more alive than the mingw.org versions.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
It's better to steer users at these, since they are both better
and more alive than the mingw.org versions.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
also add deprecation note for avcodec_get_pix_fmt_loss(), avcodec_find_best_pix_fmt_of_2()
Found-by: wm4
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Move the lavc/imgconvert functions and rename them as follows:
avpicture_get_size -> av_image_get_buffer_size()
avpicture_fill -> av_image_fill_arrays()
avpicture_layout -> av_image_copy_to_buffer()
The new functions have an align parameter, which allows to define the
linesize alignment assumed in the buffer (which is set or read).
The names of the functions are consistent with the lavu/samples API
(av_samples_get_buffer_size(), av_samples_fill_arrays()).
A redundant check has been dropped from av_image_fill_arrays().
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The only difference with mp=pp7 is that default mode is "medium", as stated
in the MPlayer docs, rather than "hard".
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
This should allow us to insert idet before scale and let scale have interl=-1 as default in that case
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ffmpeg looks for both .ffpreset and .avpreset files depending on whether the
-[avsf]pre or -pre option is used. Added two sections for each type of preset
including the rules according to which files are searched.
(Notably, the lookup order is swapped for avpreset files, because it first
looks for <codec>_<arg>.avpreset and then for <arg>.avpreset.)
This removes the section explaining -pre only, which was under "Examples",
where it did not really make sense.
Signed-off-by: Werner Robitza <werner.robitza@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c220a60f92dde9c7c118fc4deddff5c1f617cda9':
vdpau: add helper for surface chroma type and size
Conflicts:
libavcodec/vdpau.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since the VDPAU pixel format does not distinguish between different
VDPAU video surface chroma types, we need another way to pass this
data to the application.
Originally VDPAU in libavcodec only supported decoding to 8-bits YUV
with 4:2:0 chroma sampling. Correspondingly, applications assumed that
libavcodec expected VDP_CHROMA_TYPE_420 video surfaces for output.
However some of the new HEVC profiles proposed for addition to VDPAU
would require different depth and/or sampling:
http://lists.freedesktop.org/archives/vdpau/2014-July/000167.html
...as would lossless AVC profiles:
http://lists.freedesktop.org/archives/vdpau/2014-November/000241.html
To preserve backward binary compatibility with existing applications,
a new av_vdpau_bind_context() flag is introduced in a further change.
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This can be used by the application to signal its ability to cope with
video surface of types other than 8-bits YUV 4:2:0.
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This carries the pixel format that would be used if it were not for
hardware acceleration. This is equal to AVCodecContext.pix_fmt if
hardware acceleration is not in use.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This option flag deletes segment files removed from the playlist after a
period of time equal to the duration of the segment plus the duration of
the playlist.
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, use FontAwesome icons (if configured to be this way) or separate
text.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This option allows segment filenames to be specified. Unless -hls_flags
single_file is set the filename is used as a string format with the
segment number.
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -map 0 -hls_segment_filename
bar%03d.ts foo.m3u8
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1eec9bfc383f6dca29d83a2bfb45433dd66561c9':
APIchanges: mark the release 11 branch point
Conflicts:
doc/APIchanges
Not merged as the contents in our APIchanges differ and it could be confusing
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is now:
-bsf:X filter1[=opt1=str1/opt2=str2],filter2
ie the parameters are appended after the filter name using '='. As ','
has been reserved already for the list of filters, '/' is just an
example of token separation for now, but that could become part of the
API to avoid each bsf using its own tokenization.
The proper solution would be using AVOption, but this is overkill for now.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using colons to separate the outdefs is deprecated. Switch to using '|'
to separate the list items.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit allows to set codec's private option.
As side effect, it also improves preset support.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Function allows to create string containing object's serialized options.
Such string may be passed back to av_set_options_string() in order to restore options.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
This is the same logic as is invoked on AVFMT_TS_NEGATIVE,
but which can be enabled manually, or can be enabled
in muxers which only need it in certain conditions.
Also allow using the same mechanism to force streams to start
at 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '5e80fb7ff226f136dbcf3fed00a2966bf8e9bd70':
lavc: add a public API for parsing vorbis packets.
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/version.h
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Replace "frames to record" with "frames to output". The "to record"
makes it seem like an input option, or that it would capture the frames
instead of outputting them.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9911a1b2df37ca808e06dc30627215f4ec9a9e4':
doc: Document the omit_tfhd_offset flag to the mp4 muxer
Conflicts:
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
The fieldmatch filter has no problem with mixed telecined and
progressive content but the decimate filter does not detect the
changing framerate and drops progressive frames.
This can be improved in the decimate filter but for the moment
explicitely mentioning that mixed telecined and progressive
content is unsupported is an improvement.
Fixes ticket #3968.
Since av_gettime() is used in a number of places where actual
real time clock is required, the monotonic clock introduced in
ebef9f5a5 would have consequences that are hard to handle. Instead
split it into a separate function that can be used in the cases
where only relative time is desired.
On platform where no monotonic clock is available, the difference
between the two av_gettime functions is not clear, and one could
mistakenly use the relative clock where an absolute one is
required. Therefore add an offset, to make it evident that the
time returned from av_gettime_relative never is actual current
real time, even though it is based on av_gettime.
Based on a patch by Olivier Langlois.
Signed-off-by: Martin Storsjö <martin@martin.st>
The colon after the localtime function call needs an additional layer of
escaping or else everything until the next colon is treated as a
fontfile.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
Decoding acceleration may work even if the codec level is higher than
the stated limit of the VDPAU driver. Or the problem may be considered
acceptable by the user. This flag allows skipping the codec level
capability checks and proceed with decoding.
Applications should obviously not set this flag by default, but only if
the user explicitly requested this behavior (and presumably knows how
to turn it back off if it fails).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '2df0c32ea12ddfa72ba88309812bfb13b674130f':
lavc: use a separate field for exporting audio encoder padding
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/avcodec.h
libavcodec/libvorbisenc.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
Adds output of chroma sub-sampling information to
ffprobe -show_pixel_formats option.
Note: This patch just prints the "raw" log2_charoma_w/h values instead
of the previously suggested mapping into a chroma sub-sampling pattern
string like "4:2:2".
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adds option -show_pixel_formats to ffprobe which lists all
available pixel formats with some details.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This function provides an explicit VDPAU device and VDPAU driver to
libavcodec, so that the application is relieved from codec specifics
and VdpDevice life cycle management.
A stub flags parameter is added for future extension. For instance, it
could be used to ignore codec level capabilities (if someone feels
dangerous).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add CODEC_FLAG2_SKIP_MANUAL (exposed as "skip_manual"), which makes
the decoder export sample skip information via side data, instead
of applying it automatically. The format of the side data is the
same as AV_PKT_DATA_SKIP_SAMPLES, but since AVPacket and AVFrame
side data constants overlap, AV_FRAME_DATA_SKIP_SAMPLES needs to
be introduced.
This is useful for applications which want to do the timestamp
calculations manually, or which actually want to retrieve the
padding.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Radial gradient by Víctor Paesa. Linear gradient by Paul Gentemann.
Also-by: Víctor Paesa <victorpaesa@googlemail.com>
Also-by: Paul Gentemann <beriukay@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
This adds a new option -hls_flags single_file that creates one .ts file
for HLS and adds byteranges to the .m3u8 file, instead of creating one
.ts file for each segment.
This is helpful at least for storing large number of videos, as the
number of files per video is drastically reduced and copying and storing
those files takes less requests and inodes.
This is based on work by Nicolas Martyanoff, discussed on ffmpeg-devel
in July 2014. That patch seems abandoned by the author, and contained
unrelated changes. This patch tries to add the minimum amount of code to
support the byterange playlists.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It gets rendered inline in HTML and becomes not very clear.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '775a0b04f0cf8102fe322b2ee03fe1a0633dea04':
doc: Fix syntax and logical errors in avconv stream combination example
Conflicts:
doc/ffmpeg.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '041caf1a63f091745b95a6d51c23fbdcb604d4ce':
avplay: Exit by default at the end of playback
Conflicts:
Changelog
ffplay.c
Changes to ffplay not merged as they would break -autoexit as a way to override -noautoexit,
the change of the default will be implemented in the next commit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make time duration references consistent, using @ref links, and
eliminate incorrect syntax [-]HH[:MM[:SS[.m...]]].
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '94f084324e648876508bed546d950762f10b875e':
texi2pod: Make it output a single encoding string
Conflicts:
doc/texi2pod.pl
See: 12ce58bebd
Merged-by: Michael Niedermayer <michaelni@gmx.at>
