This is a port of virtual dub's histogram equalization filter by Donald
A. Graft. Based on the work by Jérémy Tran <tran.jeremy.av@gmail.com>,
done for SOCIS 2012.
This is a port of the kerndeint filter (libmpcodecs/vf_kerndeint) by
Donal A. Graft (original avisynth plugin author), and is based on the
work by Jérémy Tran <tran.jeremy.av@gmail.com> done for SOCIS 2012.
* qatar/master:
cmdutils: update copyright year to 2013
h264: check SPS entries directly to detect pixel format changes
forgotten changelogs for 9_beta2
Conflicts:
Changelog
cmdutils.c
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add support for limelight authentication
rtmp: Add support for adobe authentication
Conflicts:
Changelog
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Limelight is a not too uncommon CDN. The authentication scheme is
pretty similar to the adobe authentication, but is even closer to
normal http digest authentication (but not close enough to warrant
sharing code) than the adobe version.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly used to authenticate the client when publishing.
Tested with wowza and akamai.
Some but not all servers support resending a new connect invoke
within the same connection, so always reconnect for sending a new
connection attempt. This matches what other applications do as well.
The authentication scheme is structurally pretty similar to http
digest authentication, but uses base64 instead of hex strings.
Signed-off-by: Martin Storsjö <martin@martin.st>
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
* commit '6dd93ee6f1b050ad7c4b247899e83efa293ee405':
hlsenc: check append_entry return value
hlsenc: use the basename to generate the list entries
avstring: add av_basename and av_dirname
Conflicts:
Changelog
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Ported from MPlayer. Original author is A'rpi, with various
contributions from Michael Niedermayer. The original documentation was
mostly written by Diego Biurrun. See the MPlayer history for full
credits.
The filter is under GPL like the original filter, even if it differs
quite a lot. There is not much point in making it LGPL since pp is under
GPL.
This filter pads an audio stream with silence
It can together with -shortest be used to extend audio streams to
the same length as video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: slice-mt: check master context for valid current_picture_ptr
h264: slice-mt: get last_pic_dropable from master context
alacenc: add support for multi-channel encoding
Conflicts:
Changelog
libavcodec/alac.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
PIX is an image file format that was used by the BRender 3d engine.
Signed-off-by: Aleksi Nurmi <aleksi.nurmi@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new expansion mechanism uses the %{...} notation.
For compatibility reasons, it must be enabled explicitly,
but a warning is printed if a conflict is likely to happen.
* commit 'bf5f46b4cc47b7a4568119f224057d4ff91b6cdd':
APIChanges: add entry for av_read_packet deprecation
mxfdec: fix typo in mxf_read_seek()
avserver: use freopen to redirect stdin/out/err to /dev/null
avserver: remove daemon mode
configure: Check for -Werror parameters on clang
doxygen: remove obsolete options from Doxyfile
configure: Add option to disable all command line programs
Conflicts:
Changelog
configure
doc/APIchanges
doc/ffserver.conf
doc/ffserver.texi
ffserver.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This code spews a multitude of warnings with glibc (unchecked
return values), some of them possibly warranted. Furthermore,
the deamonisation is not suitable for use with typical startup
scripts as it does not provide the PID of the daemon in any way.
Users wishing to run avserver as a daemon can still do so using
start-stop-daemon or equivalent tools.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* qatar/master:
flacenc: ensure the order is within the min/max range in LPC order search
avconv: rescale packet duration to muxer time base when flushing encoders
add 24-bit FLAC encoding to Changelog
rtpenc_aac: Fix calculation of the header size
x86: h264_intrapred: port to cpuflags
Conflicts:
Changelog
libavformat/rtpenc_aac.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently FFM files generated with one versions of ffmpeg generally
cannot be read by another.
By spliting data into chunks, more fields can saftely be appended to
chunks as well as new chunks added.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also retroactively add a changelog entry to the 9beta1 list
for general MSVC support, which was present there already.
Signed-off-by: Martin Storsjö <martin@martin.st>
It has not worked for anything other than fringe codecs (asv1/2, mdec,
mjpeg[b]) since about 2003 and nobody ever noticed or complained. This
sufficiently proves that there are no users of this option who have a
clue of what they are doing, so it is completely useless.
This generalizes the previous work on disposition printing.
Disposition flags are shown in a dedicated section, which should improve
output intellegibility, extensibility and filtering operations.
This breaks output syntax with the recently introduced disposition
printing.
* qatar/master:
rtp: Packetization of JPEG (RFC 2435)
smoothstreamingenc: Copy the SAR on the AVStreams as well
Conflicts:
Changelog
libavformat/rtpenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '07584eaf4a95db3f11d3bc411f9786932829e82b':
mpegts: check substreams before discarding
Add a smooth streaming segmenter muxer
file: Add an avoption for disabling truncating existing files on open
img2dec: always close AVIOContexts
rtpdec_jpeg: Error out on other unsupported type values as well
rtpdec_jpeg: Disallow using the reserved q values
rtpdec_jpeg: Fold the default qtables case into an existing if statement
rtpdec_jpeg: Store and reuse old qtables for q values 128-254
rtpdec_jpeg: Simplify the calculation of the number of qtables
rtpdec_jpeg: Add more comments about the fields in the SOF0 section
rtpdec_jpeg: Clarify where the subsampling magic numbers come from
rtpdec_jpeg: Don't use a bitstream writer for the EOI marker
rtpdec_jpeg: Don't needlessly use a bitstream writer for the header
rtpdec_jpeg: Simplify writing of the jpeg header
rtpdec_jpeg: Merge two if statements
rtpdec_jpeg: Write the DHT section properly
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This muxer splits the output from the ismv muxer into individual
files, in realtime.
The same can also be done by the standalone tool ismindex, but this
muxer is needed for doing it in realtime (especially for live
streams that need extra handling for updating the lookahead fields
in the fragment headers).
Using this muxer, one can deliver live smooth streaming from a
normal static file web server. (Using ismindex, one can deliver
premade smooth streaming files from a static file web server,
or prepare files for serving with IIS.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
x86: dsputil: Only compile motion_est code when encoders are enabled
mem: fix typo in check for __ICC
fate: mp3: drop redundant CMP setting
rtp: Depacketization of JPEG (RFC 2435)
Rename ff_put_string to avpriv_put_string
mjpeg: Rename some symbols to avpriv_* instead of ff_*
yadif: cosmetics
Conflicts:
Changelog
libavcodec/mjpegenc.c
libavcodec/x86/Makefile
libavfilter/vf_yadif.c
libavformat/version.h
libavutil/mem.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec36aa69448f20a78d8c4588265022e0b2272ab5':
x86: Fix linking with some or all of yasm, mmx, optimizations disabled
configure: Add more fine-grained SSE CPU capabilities flags
avfilter: x86: Use more precise compile template names
x86: cosmetics: Comment some #endifs for better readability
g723_1: add comfort noise generation
utvideoenc: Switch to dsputils' median prediction
utvideoenc: Avoid writing into the input picture
avtools: remove the distinction between func_arg and func2_arg.
avconv: make the -passlogfile option per-stream.
avconv: make the -pass option per-stream.
cmdutils: make -codecs print lossy/lossless flags.
lavc: add lossy/lossless codec properties.
Conflicts:
Changelog
cmdutils.c
configure
doc/APIchanges
ffmpeg.h
ffmpeg_opt.c
ffprobe.c
libavcodec/codec_desc.c
libavcodec/g723_1.c
libavcodec/utvideoenc.c
libavcodec/version.h
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/rv40dsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The cpia video decoder is intended to be used with the v4l2 demuxer.
There are some small changes to the v4l2 demuxer to support the
variable frame length of the format.
Fixes ticket #1537
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a port of the MPlayer smartblur filter (libmpcodecs/vf_smartblur.c)
by Michael Niedermayer.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
While not explicitly stated in the specs, the original author
has stated that S_TEXT/UTF-8 is expected to be text using Subrip
markup, but without Subrip in-band timing.
So, now that we have a decoder that conforms to this expectation,
let's use it.
Note that this change will impact tools that use libavformat. If
they expect srt subtitles to have CODEC_ID_TEXT, they must be
adjusted to expect CODEC_ID_SUBRIP. The actual content is, obviously,
unchanged.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
fate: Add FATE tests for the Ut Video encoder
lavc: add Ut Video encoder
mpegvideo_enc: remove stray duplicate line from 7f9aaa4
swscale: x86: fix #endif comments in rgb2rgb template file
avconv: mark more options as expert.
avconv: split printing "main options" into global and per-file.
avconv: refactor help printing.
Conflicts:
Changelog
ffmpeg_opt.c
ffserver.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo_enc: don't use deprecated avcodec_encode_video().
cmdutils: refactor -codecs option.
avconv: make -shortest a per-output file option.
lavc: add avcodec_descriptor_get_by_name().
lavc: add const to AVCodec* function parameters.
swf(dec): replace CODEC_ID with AV_CODEC_ID
dvenc: don't use deprecated AVCODEC_MAX_AUDIO_FRAME_SIZE
rtmpdh: Do not generate the same private key every time when using libnettle
rtp: remove ff_rtp_get_rtcp_file_handle().
rtsp.c: use ffurl_get_multi_file_handle() instead of ff_rtp_get_rtcp_file_handle()
avio: add (ff)url_get_multi_file_handle() for getting more than one fd
h264: vdpau: fix crash with unsupported colorspace
amrwbdec: Decode the fr_quality bit properly
Conflicts:
Changelog
cmdutils.c
cmdutils_common_opts.h
doc/ffmpeg.texi
ffmpeg.c
ffmpeg.h
ffmpeg_opt.c
libavcodec/h264.c
libavcodec/options.c
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This filter is inspired upon libmpcodecs/vf_framestep.c, by Daniele
Forghieri.
Only-keyframe output is not supported, since that feature can be achieved
through the more versatile select filter.
Unsurprisingly, if a timing-less subrip decoder is desireable, an
encoder is as well. With this in place, we can move on to remove
the use of the old encoder/decoder with embedded timing and move
all timing handling the (de)muxer where they belong.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a port of the MPlayer hue filter (libmpcodecs/vf_hue.c) by
Michael Niedermayer.
Signed-off-by: Jérémy Tran <tran.jeremy.av@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Patch readapted by Stefano Sabatini, color values proposed by Tim
Nicholson <nichot20@yahoo.com>.
Address trac ticket #1462.
See thread:
Subject: [FFmpeg-devel] [PATCH] smptebars filter
Date: Wed, 20 Jun 2012 01:54:58 +0000
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
With this feature, it becomes possible to perform commonly
requested tasks, such as hardcoding bitmap subtitles.
This will be reverted once libavfilter has proper support
for subtitles. All the changes have the string "sub2video"
in them, it makes it easy to spot the parts.
This change introduces a basic encoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to write styling information,
and just writes the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Note that an additional change is required to the mov/mp4 muxer to
write empty subtitle packets to indicate subtitle duration.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
v410dec: Implement explode mode support
zerocodec: fix direct rendering.
wav: init st to NULL to avoid a false-positive warning.
wavpack: set bits_per_raw_sample for S32 samples to properly identify 24-bit
h264: refactor NAL decode loop
RTMPTE protocol support
RTMPE protocol support
rtmp: Add ff_rtmp_calc_digest_pos()
rtmp: Rename rtmp_calc_digest to ff_rtmp_calc_digest and make it global
swscale: add missing HAVE_INLINE_ASM check.
lavfi: place x86 inline assembly under HAVE_INLINE_ASM.
vc1: Add a test for interlaced field pictures
swscale: Mark all init functions as av_cold
swscale: x86: Drop pointless _mmx suffix from filenames
lavf: use conditional notation for default codec in muxer declarations.
swscale: place inline assembly bilinear scaler under HAVE_INLINE_ASM.
dsputil: ppc: cosmetics: pretty-print
dsputil: x86: add SHUFFLE_MASK_W macro
configure: respect CC_O setting in check_cc
Conflicts:
Changelog
configure
libavcodec/v410dec.c
libavcodec/zerocodec.c
libavformat/asfenc.c
libavformat/version.h
libswscale/utils.c
libswscale/x86/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPE protocol implementation uses ffrtmpcrypt:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
These filters are designed for storing and transmitting video sequences
with alpha using higher-efficiency codecs such as x264 which don't
natively support an alpha channel. 'alphaextract' takes an input stream
with an alpha channel and returns a video containing just the alpha
component as a grayscale value; 'alphamerge' takes an RGB or YUV stream
and adds an alpha channel recovered from a second grayscale stream.
Signed-off-by: Steven Robertson <steven@strobe.cc>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Allows to disable interaction from standard input.
Useful, for example, if ffmpeg is in the background process group.
Roughly the same result can be achieved with "ffmpeg ... < /dev/null"
but it requires a shell.
* qatar/master:
libopenjpeg: introduce encoding support
libopenjpeg: rename decoder source file.
RTMPTS protocol support
RTMPS protocol support
avconv: print an error message when demuxing fails.
tscc2: DCT output should not be clipped
rtmp: Rename rtmphttp to ffrtmphttp
Conflicts:
Changelog
configure
doc/general.texi
libavcodec/libopenjpegenc.c
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This change introduces a basic decoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to parse styling information,
and just reads the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
build: Fix APE tag dependencies
MS Expression Encoder Screen decoder
libfdk-aac: Allow setting the encoder bandwidth/cutoff frequency
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: Fix Ogg demuxer dependencies
build: Fix FLAC demuxer dependencies
flac: Move flac functions shared between libraries to flac common code
build: Fix CAF demuxer dependencies
build: Fix MP2 muxer dependencies
build: Add missing build rules for the ISMV muxer
configure: Drop redundant mxf_d10 test dependency declaration
Support AAC encoding via the external library fdk-aac
libavcodec: Add more AAC profiles
dct/fft-test: use a replacement getopt() if the system has none present.
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: Check for the math function rint
TechSmith Screen Codec 2 decoder
rtsp: Add listen mode
rtsp: Make rtsp_open_transport_ctx() non-static
rtsp: Move rtsp_read_close
rtsp: Parse the mode=receive/record parameter in transport lines
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>