This changes a number of FATE results, since before this commit, the
timestamps in all tests using rawenc were made up by lavf.
In most cases, the previous timestamps were completely bogus.
In some other cases -- raw formats, mostly h264 -- the new timestamps
are bogus as well. The only difference is that timestamps invented by
the muxer are replaced by timestamps invented by the demuxer.
cscd -- avconv sets output codec timebase from r_frame_rate
and r_frame_rate is in this case some guessed number 31.42 (377/12),
which is not accurate enough to represent all timestamps. This results
in some frames having duplicate pts. Therefore, vsync 0 needs to be
changed to vsync 2 and avconv drops two frames. A proper fix in the
future would be to set output timebase to something saner in avconv.
nuv -- previous timestamps for video were wrong AND the cscd
comment applies, one frame is dropped.
vp8-signbias -- the file contains two frames with identical timestamps,
so -vsync 0 needs to be removed/changed to -vsync 2 and avconv drops one
frame.
vc1-ism -- apparrently either the demuxer lies about timestamps or the
file is broken, since dts == pts on all packets, but reordering clearly
takes place.
Current code compares the desired recording time with InputStream.pts,
which has a very unclear meaning. Change the code to use actual
timestamps of the frames passed to the encoder.
In several tests, one less frame is encoded, which is more correct.
In the idroq test one more frame is encoded, which is again more
correct.
Behavior with stream copy should be unchanged.
The output is obviously not supposed to contain video (since only
-acodec copy is specified), but that only happens because of the way -t
handling is implemented currently.
Right now those muxers use the default timebase in all cases(1/90000).
This patch avoid unnecessary rescaling and makes the printed timestamps
more readable.
Also, extend the printed information to include the timebases and packet
pts/duration and align the columns.
Obviously changes the results of all fate tests which use those two
muxers.
Return the correct number of consumed bytes and set *data_size = 0.
Returned size is 1 too small, leading to that 1 byte being read as the next
frame, which results in an extra blank frame at the beginning of the stream.
get_ue_golomb_long() is only tested for values up to 2^15 - 2 since
we can not write larger values.
Silence the test on success and return a non-zero value on error.
Use an heap scratch buffer instead of large stack buffer.
Remove unneeded includes.
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
(Does not attempt to decode percetual audio data inside.)
Code coverage: libavformat/xwma.c: 3% -> 75%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(Don't attempt to decode JPEG data.)
Code coverage: libavformat/smjpeg.c: 0% -> 69%
libavcodec/adpcm.c: 0% -> 10% (fresh run); 92.4% -> 93% following a FATE run
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The previous sample used for this test only contained type 0 frames.
Replace it with a sample that also features type 1 frames.
Code coverage:
libavcodec/xxan.c: 72% -> 89%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Adds a new member to MpegEncContext to hold the number of used slice
contexts. Fixes segfaults with '-threads 17 -thread_type slice' and
fate-vsynth{1,2}-mpeg{2,4}thread{,_ilace} with --disable-pthreads.
Palette is as supposed in native endianness. Converting the pal8 output
to rgb24 is thus necessary for identical CRCs on big and little endian
systems.
Some libavifilter tests use NUT as output even if the produced
files were not decodable. The support for 10bit introduced in
432f0e5b7d and 91b1e6f0c changed the hashes.
The sample has an incomplete last frame. Decoding it is pointless.
The garbage produced was changed by the bitstream reader now
protecting against over-reads.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This patch is a generalization of what Michael Niedermayer
fixed in a single case.
The wmv8-drm fate test had been updated accordingly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
Add all seven test bitstreams of Coding Technologies "aacPlus Decoder
Check Package". The streams cover different ways to signal SBR and PS
in different formats.
AVFMT_NOTIMESTAMPS for crc, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framecrc, as it prints dts.
Many FATE changes, because avconv is no longer duplicating frames in
those tests.
Also added -vsync 0 for some tests to prevent avconv from dropping
frames until it can be fixed more properly.
AVFMT_NOTIMESTAMPS for md5, as it ignores the timestamps.
AVFMT_VARIABLE_FPS for framemd5, as it prints dts.
-vsync 0 for the vp8 test is needed because with vsync 2 the timestamp
guessing code gets confused by an altref frame that is never displayed
and drops a frame later.
The Zork PCM decoder does not decode the 1 sample we have correctly, therefore
the encoder based on the decoder is also incorrect. There is no good reason to
keep the encoder.
enable CODEC_CAP_DELAY to flush any remaining frames in the buffer.
Stop decoding when the FN_QUIT command is found so that a trailing seek table
isn't decoded as a normal frame.
decode all channels in the same call to avcodec_decode_audio3() so that
decoding will not stop after the first channel of the last frame.
Updated FATE reference. More valid audio is now decoded.
The pixel format is not known until the frame header is parsed.
Guessing it here only causes trouble for the caller if the guess
turns out to be wrong (and actually causes very wrong output by
avconv/avplay).
Signed-off-by: Mans Rullgard <mans@mansr.com>
The cbSize field should be included in all cases, even with PCM where
its value is ignored.
Fixes encoding PCM audio in Matroska for some players which insist on
a full WAVEFORMATEX structure for A_MS/ACM audio.
Since fate uses wav files for the audio test a larger number of tests
has changed checksums or shifted positions due to the 2 byte longer
wave header.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Makes the code less obfuscated and fixes encoding one video stream to
several outputs.
Also use avcodec_alloc_frame() instead of allocating AVFrame on stack.
Breaks me_threshold in avconv, as motion vectors aren't passed through
lavfi. They could be copied manually, but I don't think this misfeature
is useful enough to justify ugly hacks.
The install directory being deleted might not be present if the build failed.
This can lead to annoying error output if the FATE client is run as a cronjob.
Merge video_qscale (set by -qscale) and audio_qscale (set by -aq) into
one 'qscale' field in the options context. Add a shortcut -q for -qscale
and make -aq an alias for -q:a.
First, container stores only DTS and not PTS as it was believed.
Second, multiple frames in a packet store timestamp instead of position
after the frame length.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Its only reason for its existence was ffmpeg's inability to properly assign
AVOptions to streams. Now this is not a problem anymore, so 'ab' should
go.
Old version divided it wrong, which resulted in chroma drift (visible on FATE
sample too as dirty trails left by clouds).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This variable is set to the same value for all directories.
Adding the -L flags directly to LDFLAGS is simpler and achieves
the same thing.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Declaring tools associated with each library in their respective
makefiles allows these tools to easily depend on the correct
prerequisites and link against the libs they need.
Signed-off-by: Mans Rullgard <mans@mansr.com>
We operated on 31-bits, but with e.g. lanczos scaling, values can
add up to beyond 0x80000000, thus leading to output of zeroes. Drop
one bit of precision fixes this.
Setting CMP=null uses stdout from the test as the diff record in
the report without further inspection. This can be useful when
the exit status of the test itself determines success while the
output is informative.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Setting SRC_PATH to "." when building in-tree removes the need
for a quoted version of the source path since out-of-tree builds
are not possible if the pathname contains spaces.
Signed-off-by: Mans Rullgard <mans@mansr.com>
All tests are run through the fate-run.sh script which already
sets up redirections. Using the outputs set there simplifies
things somewhat.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This explicitly disables threading for encoding as slices are otherwise
automatically activated. This should be dropped once option resetting
between files is fully implemented.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds a comment field to the report header, suitable for
extra information not covered by the automatic fields.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This function is essentially an alias for run_ffmpeg and is only
used in one place. This patch removes the function and replaces
the call with the equivalent (simpler) run_ffmpeg call.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The old regtest scripts pass -benchmark and collect the utime values.
As these values are never used, this machinery can be removed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
These tests create reference files used for psnr calculation in
the other codec tests. Treating them as (mostly) regular tests
simplifies the makefile and makes them visible in the fate reports.
The latter makes errors in these runs easier to identify.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Also remove code that overwrites the C versions of functions in
sws_init_swScale_altivec(), so that it uses the C functions of files
if no altivec-optimized version exists.
Fix handling of input if not in native endianness, and add support for
9/10-bit output. This allows us to force endianness of YUV420P 9/10bit
in the H264/10bit fate tests, which should fix them on big-endian
systems.
This fixes the warnings:
tests/rotozoom.c:252: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result
tests/rotozoom.c:254: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result
This should fix behavior introduced by commit
96573c0d76. Av_rescale_rnd() is not
lossless so if two timestamps are equal after being rescaled they are
not always actually identical. This patch use av_compare_ts() to get
always a correct result.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This adds $DEC_OPTS to the wma decode commands, making tests pass
on systems where the bitexact flag is needed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This separates encoding and decoding flags, and passes them together
with the related file argument instead of all at the start of the
command line.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The video encoding options were needlessly split in two parameters
which are merged. The do_audio_encoding function did not use its
second argument, so this can be removed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
As per issue2629, most 23.976fps matroska H.264 files are incorrectly
detected as 24fps, as the matroska timestamps usually have only
millisecond precision.
Fix that by doubling the amount of timestamps inspected for frame rate
for streams that have coarse time base. This also fixes 29.970 detection
in matroska.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 78431098f9)
Tested with mplayer based on this report
http://thread.gmane.org/gmane.comp.video.mplayer.user/66043/focus=66063
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This makes the AC3 encoder use the shared fixed-point MDCT rather
than its own implementation. The checksum changes are due to
different rounding in the MDCT.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This updates the seek test reference to match de11ee9. Before this
change, most of the seeks requested positions before the supposed
start of the file (the preroll time), resulting in the first packet
being returned. With the preroll subtracted, some of these seeks
will land within the file and some beyond the end, thus returning
a different set of packets.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This increases the accuracy of coefficients, leading to improved quality.
Rescaling of the coefficients to full 25-bit accuracy is done rather than
offsetting the exponent values. This requires coefficient scaling to be done
before determining the rematrixing strategy. Also, the rematrixing strategy
calculation must use 64-bit math to prevent overflow due to the higher
precision coefficients.
The rematrixing strategy reuse flags are not reset between frames, so they
need to be initialized for all blocks, not just block 0.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This is to match the value in every (E-)AC-3 file from commercial sources.
It has a negligible effect on audio quality.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This patch changes the exponent difference threshold in the exponent
strategy decision function of the AC-3 encoder. I tested lowering in
increments of 100. From 1000 down to 500 generally increased in quality
with each step, but 400 was generally much worse.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Instead of saving huge raw files, use the md5: output pseudo-protocol
to calculate the checksum of the file directly. This is especially
useful when testing on remote targets as it avoids transferring 3.6GB
over the network.
This improves the audio quality significantly for stereo source with both the
fixed-point and floating-point AC-3 encoders.
Update acodec-ac3_fixed and seek-ac3_rm test references.
Originally committed as revision 26271 to svn://svn.ffmpeg.org/ffmpeg/trunk
Fixed-point AC-3 encoder renamed to ac3_fixed.
Regression test acodec-ac3 renamed to acodec-ac3_fixed.
Regression test lavf-rm changed to use ac3_fixed encoder.
Originally committed as revision 26209 to svn://svn.ffmpeg.org/ffmpeg/trunk
This gives slightly better quality in PEAQ tests.
Code 3 gives a dBpb value of 2816 = -132dB (128 psd units = -6dB), which
corresponds to 22 bits. Since the exponents have an offset applied, the
16-bit source looks like 24-bit source to the bit allocation routine.
So using dBpb code=3 is a closer match to the exponent range.
Regression test refs updated for acodec-ac3, lavf-rm, and seek-ac3_rm.
Originally committed as revision 26144 to svn://svn.ffmpeg.org/ffmpeg/trunk
