Consider a file created with something like:
cat file1.mp3 file2.mp3 > result.mp3
Then if file2.mp3 has gapless information, result.mp3 would stop playing
something in the middle. This happens because the gapless info directs
the decoder to discard all samples after a certain position. To make
matters worse, the gapless info of file2.mp3 will be used when playing
the file1.mp3 part, because the gapless info is located at the end of
the file.
While handling concatenated gapless files correctly would be insane and
a lot of effort (especially without scanning the whole file on opening),
it's easy to prevent at least early EOF. Playback will happen to work,
even if it's slightly broken.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The code already had skipping of initial padding, but discarding
trailing frame padding was missing.
This is somewhat questionable, because it will make the decoder discard
any data after the declared file size in the LAME header. But note that
skipping full frames at the end of the stream is required. Encoders
actually create such files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b263f8ffe7599d9cd27ec477a12700da8eb2790d':
lavf: add AVFormatContext.max_ts_probe
Conflicts:
doc/APIchanges
libavformat/avformat.h
libavformat/utils.c
libavformat/version.h
lavf-fate/mp3 changes as the estimated input bitrate changes and that is
copied to the output
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is basically a wrapper around av_get_audio_frame_duration(), with a
fallback to AVCodecContext.frame_size. However, that field is set only
when the stream codec context is actually used for encoding or decoding,
which is discouraged.
For muxing, it is generally the responsibility of the caller to set the
packet duration.
For demuxing, if the duration is not stored at the container level, it
should be set by the parser.
Therefore, removing the frame_size fallback should not break any
important case.
(cherry picked from commit 30e50c5027)
Conflicts:
libavformat/utils.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '019d3fccc4dcf5c8379112f697ce9eb08edee9b9':
Set protocol-level metadata in AVFormatContext any time a packet is read.
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is basically a wrapper around av_get_audio_frame_duration(), with a
fallback to AVCodecContext.frame_size. However, that field is set only
when the stream codec context is actually used for encoding or decoding,
which is discouraged.
For muxing, it is generally the responsibility of the caller to set the
packet duration.
For demuxing, if the duration is not stored at the container level, it
should be set by the parser.
Therefore, removing the frame_size fallback should not break any
important case.
If any option named "metadata" is set inside the context, it is pulled up to
the context and then the option is cleared.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Used to expose ff_raw_pix_fmt_tags[] to other libav* libraries
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Disfavor video streams with unknown resolution and no packets
Fixes seeking in audio-only-speex.flv
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7215fcf84032118ecd9fb54fb14154d69fea638d':
avformat: Mark AVOutputFormat argument in avformat_query_codec as const
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The AVStream.parser field is considered private and its location cannot be
preserved while preserving also ABI compatibility to libav, as libav added fields
before it.
Some tools like ffmpeg.c access this field though
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It seems it is more secure to simply duplicate the computing routine from compute_pkt_fields to estimate_timings_from_pts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '194be1f43ea391eb986732707435176e579265aa':
lavf: switch to AVStream.time_base as the hint for the muxer timebase
Conflicts:
doc/APIchanges
libavformat/filmstripenc.c
libavformat/movenc.c
libavformat/mxfenc.c
libavformat/oggenc.c
libavformat/swf.h
libavformat/version.h
tests/ref/lavf/mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
* commit '2dc265619a2fc9c6f9aff7ac2bcdbcb90e9610cb':
lavf: group dump functions together
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently probesize is cliped at 1mb before being used for format detection.
Alternatively this cliping could be removed but this would then tie various
things like stream analysis to the file detection.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Several chunked formats (AIFF, IFF,DSF) store ID3 metadata within an 'ID3 '
chunk tag. If such chunks are stored sequentially, it is possible for the
ID3v2 parser to confuse the chunk tag for the ID3 magic number. e.g.
[1st chunk tag ('ID3 ') | chunk size] [ID3 magic number | metadata ...]
[2nd chunk tag ('ID3 ') | chunk size] [ID3 magic number | metadata ...]
Fixes ticket #3530.
Signed-off-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
After this commit applications needs to call av_format_inject_global_side_data()
or handle AVStream side data by some other means if they want it not to be lost.
This fixes a API incompatibility with libav.
libav API does not allow the data to be passed through AVPackets
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Calling avformat_free_context() right after avformat_alloc_output_context2()
leaved option's default values not freed.
Options were freed only in av_write_trailer().
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use const pointers to AVPacket and AVStream.
Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '25b32586566f285d797737863c97a1c5c9c84e2b':
lavf: add an AVStream field for exporting stream-global side data
Conflicts:
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avconv: Match stream id
Conflicts:
cmdutils.c
doc/fftools-common-opts.texi
See: ea07063fd8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously these type of streams were not returned even if wanted stream was
set to a stream of such. Now they are only skipped if they are not wanted
streams.
Fixes ffplay -sst <stream number> out.ts where stream number is a *_IMPAIRED stream.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is the solution we've been using in XBMC for over 2 years for dvd still frames.
The problem is that the demuxer asks for probing of the codec in the mpeg stream.
This causes lavf to read the whole menu structure into internal buffers.
After which, it won't read from input stream anymore and no events triggers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '78987a88a88b28d93d03ed6c228bcb33f178444f':
lavf: include 60 fps in guessed standard frame rates
Merged-by: Michael Niedermayer <michaelni@gmx.at>
