* commit 'b14e89b3c5e6d7f6401a2ff1e3d198fa902e988a':
Prepare for 9 Release.
Update release notes for the 9 release.
avprobe: also output dar/par if only defined in stream
Conflicts:
RELEASE
avprobe.c
doc/RELEASE_NOTES
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is a port of virtual dub's histogram equalization filter by Donald
A. Graft. Based on the work by Jérémy Tran <tran.jeremy.av@gmail.com>,
done for SOCIS 2012.
This is a port of the kerndeint filter (libmpcodecs/vf_kerndeint) by
Donal A. Graft (original avisynth plugin author), and is based on the
work by Jérémy Tran <tran.jeremy.av@gmail.com> done for SOCIS 2012.
After making some blind tests on a small collection of music
samples for home usage. It turned out that the default cutoff
was too low.
The impact of filter_size was not clearly distinguishable (the
results were on the edge) with the music samples but turned out
to be clearly audible in some synthetic samples.
Thanks to Daniel for helping out with the listening tests.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
* commit '6dd93ee6f1b050ad7c4b247899e83efa293ee405':
hlsenc: check append_entry return value
hlsenc: use the basename to generate the list entries
avstring: add av_basename and av_dirname
Conflicts:
Changelog
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Ported from MPlayer. Original author is A'rpi, with various
contributions from Michael Niedermayer. The original documentation was
mostly written by Diego Biurrun. See the MPlayer history for full
credits.
The filter is under GPL like the original filter, even if it differs
quite a lot. There is not much point in making it LGPL since pp is under
GPL.
The attribute container of the top-level div is changed from "class" to
"id" to match the website CSS.
Improve consistency between website docs and local documentation style.
This shrinks the tool manuals to a manageable size. Relevant manuals are
referenced in the "See Also" chapter.
Overall documentation inclusion should still be possible through the use
of a conditional variable set during configuration time, if someone feels
the need for a huge-wall-of-text-fashioned manual.
Add more references, and generate alternative variants for HTML and POD
output. In particular, this allows to render a "See Also" chapter in the
HTML output.
Ignore @c man begin ... @c man end comments, rely on @chapter for marking
the beginning of the various manual top level sections.
This allows us to write markup which is not dependent on the specific
texi2pod.pl implementation.
This change causes a few rendering issues, which will be fixed in further
patches.
This will prevent an overflow in the SSSE3 and MMX filter_line code:
delta is expressed as an u16 being shifted by 2 to the left. If it
overflows, having a strength not above 64 will make sure that m is set
to 0 (making the m*m*delta >> 14 expression void).
A value above 64 should not make any sense unless gradfun is used as a
blur filter.
This filter pads an audio stream with silence
It can together with -shortest be used to extend audio streams to
the same length as video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows to clean the doc directory from the parent project dir.
The command:
make -C doc clean
does not work as long as the paths specified in doc/Makefile are relative
to the parent dir.
Also it is consitent with "testclean" and "distclean" targets.
Fail with a meaningfull error message in case of bogus input.
Also the new options are more consistent with the rest of the tool
options, since it does not support generic stream specifiers.
* commit 'b35e5d985dd12acf9a0aaa52334134edcf35d68e':
doc: improve documentation for the asyncts filter first_pts option
asyncts: fix the asyncts behavior when using the first_pts option
Conflicts:
libavfilter/af_asyncts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The file now contains also an audio select implementation. Also move the
aselect/select documentation from video filters to the multimedia filters
section.
The new options reset the timestamps at each new segment, so that the
generated segments will have timestamps starting close to 0.
It is meant to address trac ticket #1425.
* commit '18e6f087c4a50bede8449ee164778945480be50c':
img2: document the options available
hls: improve options description
hls: use a meaningful long name
hls: add start_number option
h264: check for invalid zeros_left before writing
Conflicts:
doc/demuxers.texi
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Gif demuxer is capable of extracting multiple frames from gif file.
In conjunction with gif decoder it implements support for reading
animated gifs.
Demuxer has two options available to user: default_delay and min_delay.
These options are for protection from too rapid gif animations. In practice
it is standard approach to slow down rendering of this kind of gifs. If you try to
play gif with delay between frames of one hundredth of second (100fps) using
one of major web browsers, you get significantly slower playback,
around 10 fps. This is because browser detects that delay value is less than some
threshold (usually 2 hundredths of second) and reset it to default value (usually 10
hundredths of second, which corresponds to 10fps). Manipulating these options user
can achieve the same effect during conversion to some video format. Otherwise user
can set them to not protect from rapid animations at all.
The other case when these options necessary is for gif images encoded according to
gif87a standard since prior to gif89a there was no delay information included in file.
Bump lavf minor version.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
The following commit will make it useless.
The crop_scale_vflip FATE test changes because of off-by-one differences
in output when vflipped slices are passed to sws.
'k', 'M', and 'G' are SI (unit) prefixes or metric prefixes,
not 'number postfixes'. Also, the statement regarding binary
prefixes ("powers of 2 are used instead of powers of 10")
might be misinterpreted (1 kB = 10^3 B, but 1 KiB != 2^3 B).
Signed-off-by: Diego Biurrun <diego@biurrun.de>
PIX is an image file format that was used by the BRender 3d engine.
Signed-off-by: Aleksi Nurmi <aleksi.nurmi@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new expansion mechanism uses the %{...} notation.
For compatibility reasons, it must be enabled explicitly,
but a warning is printed if a conflict is likely to happen.
* commit 'bf5f46b4cc47b7a4568119f224057d4ff91b6cdd':
APIChanges: add entry for av_read_packet deprecation
mxfdec: fix typo in mxf_read_seek()
avserver: use freopen to redirect stdin/out/err to /dev/null
avserver: remove daemon mode
configure: Check for -Werror parameters on clang
doxygen: remove obsolete options from Doxyfile
configure: Add option to disable all command line programs
Conflicts:
Changelog
configure
doc/APIchanges
doc/ffserver.conf
doc/ffserver.texi
ffserver.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This code spews a multitude of warnings with glibc (unchecked
return values), some of them possibly warranted. Furthermore,
the deamonisation is not suitable for use with typical startup
scripts as it does not provide the PID of the daemon in any way.
Users wishing to run avserver as a daemon can still do so using
start-stop-daemon or equivalent tools.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The options USE_INLINE_TREES, SHOW_DIRECTORIES and HTML_ALIGN_MEMBERS
became obsolete with doxygen 1.8.1 (releaded 2012-05-19). The generated
outpu for older doxygen versions should not change since they were set
to the default value.
The mention of multimedia stream sounds more like multiple
elementary media streams like video and audio multiplexed
into a multimedia container format.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '5ff998a233d759d0de83ea6f95c383d03d25d88e':
flacenc: use uint64_t for bit counts
flacenc: remove wasted trailing 0 bits
lavu: add av_ctz() for trailing zero bit count
flacenc: use a separate buffer for byte-swapping for MD5 checksum on big-endian
fate: aac: Place LATM tests and general AAC tests in different groups
build: The A64 muxer depends on rawenc.o for ff_raw_write_packet()
Conflicts:
doc/APIchanges
libavutil/version.h
tests/fate/aac.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function does the low-level work of av_opt_set_from_string()
but can be used when there is no option context or when a generic
handling of unknown keys is needed.
av_opt_set_from_string() is changed to make use of it.
* qatar/master:
doc: add apidoc target for doxygen API documentation
matroskadec: do not use avpacket internals
Conflicts:
doc/Makefile
libavformat/matroskadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Documentation includes only the externally visible API of the installed
headers.
Based on a patch by Anton Khirnov <anton@khirnov.net>.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '14f031d7ecfabba0ef02776d4516aa3dcb7c40d8':
dv: use AVStream.index instead of abusing AVStream.id
lavfi: add ashowinfo filter
avcodec: Add a RFC 3389 comfort noise codec
lpc: Add a function for calculating reflection coefficients from samples
lpc: Add a function for calculating reflection coefficients from autocorrelation coefficients
lavr: document upper bound on number of output samples.
lavr: add general API usage doxy
indeo3: remove duplicate capabilities line.
fate: ac3: Add dependencies
Conflicts:
Changelog
doc/filters.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/af_ashowinfo.c
libavfilter/allfilters.c
libavfilter/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '381dc1a5ec0925b281c573457c413ae643567086':
fate: ac3: Place E-AC-3 tests and AC-3 tests in different groups
fate: Add shorthands for acodec PCM and ADPCM tests
avconv: Drop unused function argument from do_video_stats()
cmdutils: Conditionally compile libswscale-related bits
aacenc: Drop some unused function arguments
rtsp: Avoid a cast when calling strtol
nut: support textual data
nutenc: verbosely report unsupported negative pts
Conflicts:
cmdutils.c
ffmpeg.c
libavformat/nut.c
libavformat/nutenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the first argument can be read as a video size, set that output size
in the scale. This allows to specify in a filtergraph scale=qcif or
scale=320x240.
This is not completely safe, for example in case of a typo in the video
size string the first argument will be read as the input width
expression, giving rise to a confusing comment.
They are essential to be able to use the utils without av_malloc()
That is for example use with malloc(), memalign(), some other
private allocation function, on the stack or others.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: fix tests for 2-arg math functions
doc: git-howto: Clarify comment about pushing series of commits
ivi_common: Drop unused function parameter from decode_band()
cook: Remove some silly Doxygen comments
cook: Remove senseless maybe_reformat_buffer32() function
cook: cosmetics: Better names for joint_decode() function parameters
cook: cosmetics: Better name for ccpl COOKSubpacket member
doxygen: Add av_alloc_size to list of predefined macros
doxygen: Drop some pointless entries from PREDEFINED macros list
h263: avoid memcpys over array bound in motion vector caching for obmc
Conflicts:
configure
doc/git-howto.texi
libavcodec/cook.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They dont work at all and trash the output totally
also they are unmaintained -> that is if you want to maintain them
contact us !
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c68317ebbe4915035df0b08c23eea7a0b80ab881':
lavc: fix documentation for AVCodecContext.delay
atrac3: return an error if extradata_size is not a specific known size
lavc: use the correct API version guard macro for avcodec_encode_audio()
Move Doxyfile into the doc/ subdirectory
doxygen: Build Doxygen documentation in the doc/ subdirectory
dfa: use av_memcpy_backptr() where previously impossible
av_memcpy_backptr: Drop no longer necessary malloc padding
Conflicts:
.gitignore
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0c03cc68386443f1e96ab6fb358220faf67cd5ff':
mp3: exit on parsing error in mp_decode_frame
rtmppkt: Avoid unescaped backslash in Doxygen comment
fate-lavfi: replace sed/grep/cut combos with awk
build: Plan 9 support
Conflicts:
configure
tests/lavfi-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow to specify a filename where to put the filtergraph description.
This is useful to override limitations or glitches of particular shell
environments, and allows a level of indirection for specifying
filtergraphs.
* commit 'add3a6902ea4d459f36655656a1f8daa409118a7':
lavu: bump major to 52
Conflicts:
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2b8dd371e4d276ca0d342e82b8b4cc281be0630a':
lavu: postpone recent deprecations until the next major bump
APIchanges: update lavr bump date
avconv: only apply presets when we have an encoder.
atrac3: replace a calculation with FFALIGN()
atrac3: remove unused ATRAC3Context field, sample_rate
atrac3: use sizeof(variable) instead of sizeof(type)
atrac3: simplify MDCT window calculation
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds support for building on Plan 9 x86-32. The compat/plan9
directory contains these items:
- replacements for the 'head' and 'printf' shell commands
- wrapper for main() to disable FPU exceptions
Larger required changes to the system are described in the
documentation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In addition to the recent tables mess, the AVOption defaults behavior
changed, so an old lavc used with a new lavu will get completely messed
up defaults.
This commit introduces a new AVPacket side data type:
AV_PKT_DATA_STRINGS_METADATA. Its main goal is to provide a way to
transmit the metadata from the AVFilterBufferRef up to the AVFrame. This
is at the moment "only" useful for lavfi input from libavdevice:
lavd/lavfi only outputs packets, and the metadata from the buffer ref
kept in its context needs to be transmitted from the packet to the frame
by the decoders. The buffer ref can be destroyed at any time (along with
the metadata), and a duplication of the AVPacket needs to duplicate the
metadata as well, so the choice of using the side data to store them was
selected.
Making sure lavd/lavfi raises the metadata is useful to allow tools like
ffprobe to access the filters metadata (it is at the moment the only
way); ffprobe will now automatically show the AVFrame metadata in any
customizable output format for users. API users will also be able to
access the AVFrame->metadata pointer the same way ffprobe does
(av_frame_get_metadata).
All the changes are done in this single commit to avoid some memory
leaks: for instances, the changes in lavfi/avcodec.c are meant to
duplicate the metadata from the buffer ref into the AVFrame. Unless we
have an internal way of freeing the AVFrame->metadata automatically, it
will leak in most of the user apps. To fix this problem, we introduce
AVCodecContext->metadata and link avctx->metadata to the current
frame->metadata and free it at each decode frame call (and in the codec
closing callback for the last one). But doing this also means to update
the way the tiff decoder already handles the AVFrame->metadata (it's the
only one decoder with frame metadata at the moment), by making sure it
is not trying to free a pointer already freed by the lavc internals.
The lavfi/avcodec.c buffer ref code is based on an old Thomas Kühnel
work, the rest of the code belongs to the commit author.
Signed-off-by: Thomas Kühnel <kuehnelth@googlemail.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
