Intel i263 codec has special 8-byte dummy frames that should not be decoded,
so do not even attempt to decode them and skip them instead.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Since error resilience uses AVFrame pointers instead of references it
has to copy NULL pointers too. After a codec flush the last/next frame
pointers in MpegEncContext are NULL and the old pointers remaining in
ERContext are invalid. Fixes a crash in vlc for android thumbnailer.
Reported and debugged by Adrien Maglo <magsoft@videolan.org>.
We know that the called function (ff_chroma_inter_body_mmxext)
doesn't touch the redzone, and thus will be kept intact - thus,
this doesn't fix any bug per se.
However, valgrind's memcheck tool intentionally assumes that the
redzone is clobbered on every function call and function return
(see a long comment in valgrind/memcheck/mc_main.c). This avoids
false positives in that tool, at the cost of an extra stack pointer
adjustment.
The other alternative would be a valgrind suppression for this issue,
but that's an extra burden for everybody that wants to run libavcodec
within valgrind.
Signed-off-by: Martin Storsjö <martin@martin.st>
The actual predictor value, set by the trellis code, never
was written back into the variable that was written into
the block header. This was accidentally removed in b304244b.
This significantly improves the audio quality of the trellis
case, which was plain broken since b304244b.
Encoding IMA QT with trellis still actually gives a slightly
worse quality than without trellis, since the trellis encoder
doesn't use the exact same way of rounding as in
adpcm_ima_qt_compress_sample and adpcm_ima_qt_expand_nibble.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This was broken in 095be4fb - samples+ch (for the previous
non-planar case) equals &samples_p[ch][0]. The confusion
probably stemmed from the IMA WAV case where it originally
was &samples[avctx->channels + ch], which was correctly
changed into &samples_p[ch][1].
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This reduces the number of different licenses used within libav,
and is preferrable since it has less ambiguous wordings than
the BSD license with respect to the duties of the user of the code.
Fraunhofer have now indicated that they're allowed to contribute
code under this license as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Move the GNU as check before the arch specific asm checks since the .dn
check requires gas compatible assembler.
Disable the VC-1 motion compensation NEON asm which is the only part
using that directive. The integrated assembler in the upcoming clang 3.5
does not support .dn/.qn without plans to change that. Too much effort
to implement it while it is rarely used.
http://llvm.org/bugs/show_bug.cgi?id=18199.
Blackfin is a painful platform to work with, no test machines are available
and the range of multimedia applications is dubious. Thus it only represents
a maintenance burden.
Some encoders (e.g. flac) need to send side data when there is no more
data to be output. This enables them to output a packet with no data in
it, only side data.
This avoids all the ABI troubles associated with avpriv_.
Since this function is very small and does not depend on any tables,
making it inline should have no adverse effects.
Also include zero in the table, eliminating a special case in the
decoder.
Signed-off-by: Niels Möller <nisse@southpole.se>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add AV_PKT_DATA_DISPLAYMATRIX and AV_FRAME_DATA_DISPLAYMATRIX as stream and
frame side data (respectively) to describe a display transformation matrix
for linear transformation operations on the decoded video.
Add functions to easily extract a rotation angle from a matrix and
conversely to setup a matrix for a given rotation angle.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Side data count is incremented by by calling av_packet_new_side_data()
in the following loop, setting it explicitly results in the resulting
value being twice what it should be.
CC: libav-stable@libav.org
Right now, the caller has to manually manage some allocated
AVCodecContext fields, like extradata or subtitle_header. This is
fragile and prone to leaks, especially if we want to add more such
fields in the future.
The only reason for this behaviour is so that the AVStream codec context
can be reused for decoding. Such reuse is discouraged anyway, so this
commit is the first step to deprecating it.
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
It leverages the new hwaccel 1.2 features:
- get_buffer2 is never called
- the internal context is automatically initialized/deinitialized
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This should make it possible for Fraunhofer to contribute to these
wrappers - they didn't want to contribute to code under LGPL2.1 with
the "or any later version" clause (which allowed using the code
under the LGPL3 license).
Signed-off-by: Martin Storsjö <martin@martin.st>
7.1(wide) and 7.1(wide-side) channel layouts are supported in
fdk-aac since the 0.1.3 release.
The earlier versions of fdk-aac didn't include any library
version defines in the public headers, thus checking for
the AACENCODER_LIB_VL0 define is enough to know that we're
building against a new enough version of fdk-aac.
This change includes contributions by Tim Walker,
Michael Niedermayer and Timothy Gu.
Signed-off-by: Martin Storsjö <martin@martin.st>
Old Intel GPUs expect the reference frame index to the actual surface,
instead of the index into RefFrameList as specified by the spec.
This workaround should be set when using one of the "ClearVideo" decoder
devices.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The latest H.264 DXVA specification states that the index in this
structure should refer to a valid entry in the RefFrameList of the picture
parameter structure, and not to the actual surface index.
Fixes H.264 DXVA2 decoding on recent Intel GPUs (tested on Sandy and Ivy)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This caused mpv (and possibly others) to fallback to software decoding after
seeking a VC1 stream.
Bug-Id: 667
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The picture slot can be recycled by select_input_picture and
only current_picture is populated with the valid pts.
Unbreak timestamps when in cbr mode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes artifacts
Fixes use of freed memory
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Also set the RGBA pixel format correctly as the native endian format,
which is what it returns.
This fixes the tests on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
avctx->coded_{height,width} will always equal h->{height,width} since
init_dimensions() does that explicitly, Size changes are detected by
changes in mb_{height,width} earlier and propagated through the
needs_reinit variable.
This array is written using AV_WN32A, assuming alignment.
This hopefully fixes the failing vp7 fate test on sparc.
Signed-off-by: Martin Storsjö <martin@martin.st>
No initialization is needed in dca_decode_frame, because the next
thing it does is calling dca_parse_frame_header, which takes care of
the needed initialization.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
CC:libav-stable@libav.org
The most interesting parts are initialization in ff_MPV_common_init() and
uninitialization in ff_MPV_common_end().
ff_mpeg_unref_picture and ff_thread_release_buffer have additional NULL
checks for Picture.f, because these functions can be called on
uninitialized or partially initialized Pictures.
NULL pointer checks are added to ff_thread_release_buffer() stub function.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The old implementation is unusable due to changes in the Xvid API.
Further fixes by Michael Niedermayer <michaelni@gmx.at>.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Sandy Bridge Win64:
180 cycles in ff_synth_filter_inner_sse2
150 cycles in ff_synth_filter_inner_avx
Also switch some instructions to a three operand format to avoid
assembly errors with Yasm 1.1.0 or older.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Further performance improvements and security fixes by
Vittorio Giovara, Luca Barbato and Diego Biurrun.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Additional fixes and enhancements by Vittorio Giovara, Gonzalo Garramuno,
Nicolas George, Paul B Mahol and Michael Niedermayer.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The assumption of (MPEG) Picture and H264Picture layout matching might
not hold true in the future.
Signed-off-by: Hendrik Leppkes <h.leppkes@gmail.com>
This allows proper muxing and seeking in things like MPEG-TS, by
placing headers by random access points.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This was only used in hevc muxing code so far.
This makes the return values match what get_se_golomb returns for
the same bitstream reader instances.
The logic for producing a signed golomb code out of an unsigned one
was based on the corresponding code in get_se_golomb, which operated
directly on the bitstream reader buffer - not on the equivalent
return value from get_ue_golomb.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Profiling results for overall decode and the output_data function in
particular are as follows:
Before After
Mean StdDev Mean StdDev Confidence Change
6:2 total 339.6 15.1 329.3 16.0 95.8% +3.1% (insignificant)
6:2 function 24.6 6.0 9.9 3.1 100.0% +148.5%
8:2 total 324.5 15.5 323.6 14.3 15.2% +0.3% (insignificant)
8:2 function 20.4 3.9 9.9 3.4 100.0% +104.7%
6:6 total 572.8 20.6 539.9 24.2 100.0% +6.1%
6:6 function 54.5 5.6 16.0 3.8 100.0% +240.9%
8:8 total 741.5 21.2 702.5 18.5 100.0% +5.6%
8:8 function 63.9 7.6 18.4 4.8 100.0% +247.3%
The assembly version has also been tested with a fuzz tester to ensure that
any combinations of inputs not exercised by my available test streams still
generate mathematically identical results to the C version.
Signed-off-by: Martin Storsjö <martin@martin.st>
Profiling on a Raspberry Pi revealed the best performance to correspond
with VLC_BITS = 5. Results for overall audio decode and the get_vlc2 function
in particular are as follows:
Before After
Mean StdDev Mean StdDev Confidence Change
6:2 total 348.8 20.1 339.6 15.1 88.8% +2.7% (insignificant)
6:2 function 38.1 8.1 26.4 4.1 100.0% +44.5%
8:2 total 339.1 15.4 324.5 15.5 99.4% +4.5%
8:2 function 33.8 7.0 27.3 5.6 99.7% +23.6%
6:6 total 604.6 20.8 572.8 20.6 100.0% +5.6%
6:6 function 95.8 8.4 68.9 8.2 100.0% +39.1%
8:8 total 766.4 17.6 741.5 21.2 100.0% +3.4%
8:8 function 106.0 11.4 86.1 9.9 100.0% +23.1%
Signed-off-by: Martin Storsjö <martin@martin.st>
Profiling results for overall audio decode and the rematrix_channels function
in particular are as follows:
Before After
Mean StdDev Mean StdDev Confidence Change
6:2 total 370.8 17.0 348.8 20.1 99.9% +6.3%
6:2 function 46.4 8.4 45.8 6.6 18.0% +1.2% (insignificant)
8:2 total 343.2 19.0 339.1 15.4 54.7% +1.2% (insignificant)
8:2 function 38.9 3.9 40.2 6.9 52.4% -3.2% (insignificant)
6:6 total 658.4 15.7 604.6 20.8 100.0% +8.9%
6:6 function 109.0 8.7 59.5 5.4 100.0% +83.3%
8:8 total 896.2 24.5 766.4 17.6 100.0% +16.9%
8:8 function 223.4 12.8 93.8 5.0 100.0% +138.3%
The assembly version has also been tested with a fuzz tester to ensure that
any combinations of inputs not exercised by my available test streams still
generate mathematically identical results to the C version.
Signed-off-by: Martin Storsjö <martin@martin.st>
Profiling results for overall audio decode and the mlp_filter_channel(_arm)
function in particular are as follows:
Before After
Mean StdDev Mean StdDev Confidence Change
6:2 total 380.4 22.0 370.8 17.0 87.4% +2.6% (insignificant)
6:2 function 60.7 7.2 36.6 8.1 100.0% +65.8%
8:2 total 357.0 17.5 343.2 19.0 97.8% +4.0% (insignificant)
8:2 function 60.3 8.8 37.3 3.8 100.0% +61.8%
6:6 total 717.2 23.2 658.4 15.7 100.0% +8.9%
6:6 function 140.4 12.9 81.5 9.2 100.0% +72.4%
8:8 total 981.9 16.2 896.2 24.5 100.0% +9.6%
8:8 function 193.4 15.0 103.3 11.5 100.0% +87.2%
Experiments with adding preload instructions to this function yielded no
useful benefit, so these have not been included.
The assembly version has also been tested with a fuzz tester to ensure that
any combinations of inputs not exercised by my available test streams still
generate mathematically identical results to the C version.
Signed-off-by: Martin Storsjö <martin@martin.st>
Matroska, MP4, and other containers require it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
There is no point in populating NuvContext with another DSPContext.
Also split static and dynamic initialization bits to avoid running the
static initialization parts over and over.
This gets rid of aliasing completely unrelated structs to Picture.
Fixes the remaining compilation warnings in the vdpau code.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The code passed H264Picture* and Picture*, and assumed the
hwaccel_picture_private field was in the same place in both
structs. Somehow this happened to work in Libav, but broke in
FFmpeg (and probably subtly breaks in Libav too).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is done to disentangle ER from mpegvideo. In order to use a
classic Picture, callers can use ff_mpeg_set_erpic() or use a custom function
to set the fields. Please note that buffers need to be allocated before
calling ff_er_frame_end().
The function is assigned to a function pointer that does not have the
restrict keyword for that parameter.
This fixes compilation for MSVC builds that don't recognize "restrict",
broken since ed9625eb62.
The function is supposed to confirm that the compiler provided enough
alignment, but in practice it is only run in certain code paths and
insufficient alignment problems are restricted to legacy compilers.
Based on the aarch64 asm. CPU cycle counts on cortex-a9 compared to
gcc 4.8.2:
before: 475 decicycles in get_cabac_noinline, 67106035 runs, 2829 skips
after: 393 decicycles in get_cabac_noinline, 67106474 runs, 2390 skips
Overall speedup is above 2%. Code generated by clang 3.4 is slower on
the same hardware and the relative change is a little larger.
Based on the x86 branchless get_cabac asm. get_cabac_noinline() gets
approximately 20% faster (no cycle counts available) compared to clang
from Xcode 5.1 beta5. More than 6% faster overall. A part of the overall
speedup might be explained by additional inlining of get_cabac().
The overread avoidance fix in cbddee1cca
broke the computation for the last row since it prevented the safe
reading from the height+1-th row.
CC: libav-stable@libav.org
Some content requires an higher number of slices in order to
render properly.
Rise the number to 1024 and warn if ever it exceeds.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The SVQ3 decoder reuses large parts of the H.264 decoder so it
makes no sense to enable the former but not the latter.
Also drop unnecessary h263.o object from SVQ3 decoder object list.
Avoid a division by 0 in ff_mpeg4_set_one_direct_mv.
Sample-Id: 00000168-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
avcodec_flush_buffers() must release all internally held references
according to its documentation, for which all the threads need to be
flushed.
CC:libav-stable@libav.org
Bug-Id: vlc/9665
These codecs compile all of the MJPEG code anyway, so there is little
point in not enabling the MJPEG decoder directly. This also simplifies
the dependency declarations for the MJPEG codec family.
This codec compiles all of the SP5X code anyway, so there is little
point in not enabling the decoder directly. This also simplifies the
dependency declaration for the AMV decoder.
AAC LOAS can have new audio config objects in the stream itself.
Make sure the decoder reconfigures itself when the first one arrives
midstream.
Bug-Id: 644
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The vector dequantization has a test in a loop preventing effective SIMD
implementation. By moving it out of the loop, this loop can be DSPized.
Therefore, modify the current DSP implementation. In particular, the
DSP implementation no longer has to handle null loop sizes.
The decode_hf implementations have following timings:
For x86 Arrandale:
C SSE SSE2 SSE4
win32: 260 162 119 104
win64: 242 N/A 89 72
The arm NEON optimizations follow in a later patch as external asm. The
now unused check for the y modifier in arm inline asm is removed from
configure.
Based on a patch from Christophe Gisquet.
Unrolling of the m == 0 case avoids a possible use of the uninitilized
value sum when s->predictor_history is not set. I failed to find a
sample for it. It also reduced the cycle count from 220 to 150 on
sandy bridge, x86_64 linux, gcc 4.8.2 compared to his patch.
Timings for Arrandale:
C SSE
win32: 2108 334
win64: 1152 322
Factorizing the inner loop with a call/jmp is a >15 cycles cost, even with
the jmp destination being aligned.
Unrolling for ARCH_X86_64 is a 20 cycles gain.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The scaling factor is constant so it is faster to scale the
FIR coefficients in the tables during compilation.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Framerate is now a sane rational instead of an integer, and
inputDepth is changed to what it actually is.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
And use the value from the specification.
Sample-Id: 00000451-google
Found-by: Mateusz j00ru Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Makes fate-h264 pass under valgrind --undef-value-errors=yes with
-cpuflags none. {avg,put}_h264_chroma_mc8_8 approximately 5% faster,
{avg,put}_h264_chroma_mc4_8 2% faster both on x86 and arm.
Altivec can only load naturally aligned vectors. To handle possibly
unaligned data a second vector is loaded from an offset of the original
location and the data is recovered through a vector permutation.
Overreads are minimal if the offset for second load points to the last
element of data. This is 7 for loading eight 8-bit pixels and overreads
are reduced from 16 bytes to 8 bytes if the pixels are 64-bit aligned.
For unaligned pixels the overread is reduced from 23 bytes to 15 bytes
in the worst case.
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.
Also sets slices to 1 for the Ut Video encoder tests to keep them
green.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
User data is usually coded before slice data. That means the frame
the user data belongs to is not available while parsing the user data.
The stereo3D side data has to use the same indirection over the private
context as pan scan information and A53 captions.
Bug-Id:632
AVFrame.sample_rate is set in ff_get_buffer, but aacdec calls
ff_get_buffer before the samplerate is known. So it needs to be
set again before returning the frame.
It was done only in check_mvset(), while mv_scale() is called also by
dist_scale().
Sample-Id: 00001579-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
When request_channel_layout is 0,
all substreams should be decoded.
Thanks to Michael Niedermayer for spotting.
Also fix a mismatch between the parser and
decoder when request_channel_layout is a
subset of Stereo.
Don't decode further substreams if request_channel_layout
is a subset of the current substream's channel_layout.
Before, we would only discard further substreams if
request_channel_layout matched the substream's
channel_layout extactly, thus decoding additional
channels which the caller would probably end up downmixing.
The x86 runs short on registers because numerous elements are not static.
In addition, splitting them allows more optimized code, at least for x86.
Arm asm changes by Janne Grunau.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
For the callable function (as opposed to the inline one):
C SSE SSE2 SSE4
Win32: 47 42 29 26
Win64: 30 33 25 23
The SSE version is neither compiled nor set for ARCH_X86_64, as the
inlinable function takes over.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
It is currently declared as a macro who is set to inlinable functions,
among which a Neon and a default C implementations.
Add a DSP parameter to each inline function, unused except by the
default C implementation which calls a function from the DSP context.
On an Arrandale CPU, gain for an inlined SSE2 function vs. a call:
- Win32: 29 to 26 cycles
- Win64: 25 to 23 cycles
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Also adjust header #include order and some comments.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Prevents using GetBitContexts with data from previous calls.
Fixes access to freed memory.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
With cli usage the decoder might have not set the colorspace during
encoder init, manual colorspace override might be needed in such
cases.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
A dependent slice cannot have address 0.
Prevent an out of array bound load in ff_hevc_cabac_init().
Sample-Id: 00001406-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
According to my understanding of T-REC-H.265-2013044 chapter 8.6.1.
Sample-Id: 00001438-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Makes it easier to recreate an AVCodecContext for ATRAC3+ decoding,
which is needed in multimedia frameworks, as well as in general cases
where demuxing and decoding are separate entities.
Should fix crashes or corrupt output on pre-SSE2 CPUs when they were
using SSE2-code (e.g. AMD Athlon XP 2400+ or Intel Pentium III) in
hfix or hvar single-edge (left/right) extension functions.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
- The memcpy was completely wrong because
s->prob_ctx[s->framectxid].coef is a [4][2][2][6][6][3] array, whereas
s->prob.coef is a [4][2][2][6][6][11] array.
- The additional check was committed to ffmpeg by Ronald S. Bultje.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This handles macroblock edges for the chroma components in the same way
as for the luma compoment for 4:4:4 streams. The Spec explicitly states
that the deblocking filter is not applied to edges at the boundary of
the picture.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The default get_buffer2() implementation (and possibly some
user ones) does not allocate edges when this flag is set, which may
expose bugs in some decoders. Until the 10 release is out, it is safer
to remove this part.
The T-REC-H.265-2013044 page 79 states it has to be in the range
[-s->sps->qp_bd_offset, 51].
Sample-Id: 00001386-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The src buffer should only contain values in the interval
[0, (1 << BIT_DEPTH) - 1].
Since shift = (BIT_DEPTH - 5), src[x] >> shift must be in
the interval [0, 31], so no clip is needed.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The reconstructed picture should always be clipped (see section 8.6.5),
previously we did not clip coding units where
cu_transquant_bypass_flag == 1.
Sample-Id: 00001325-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
And use unsigned datatypes.
Otherwise it would overflow.
Sample-Id: 00001315-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This matches how its done for SPS/PPS.
Fixes null pointer dereference.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes an issue where the B-frame coding mode switches from interlaced
fields to interlaced frames, causing incorrect decisions in the motion
compensation code and resulting in visual artifacts.
CC: libav-stable@libav.org
Signed-off-by: Tim Walker <tdskywalker@gmail.com>
An invalid VUI is not considered a fatal error, so the SPS containing it
may still be used. Leaving an invalid value of num_reorder_frames there
can result in writing over the bounds of H264Context.delayed_pic.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Otherwise the ER code might try to use some already freed references.
Fixes possible access to freed memory.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Higher modes are not allowed for 16x16/chroma, which is what this
function is used for. Otherwise this function would return 0 (vertical
prediction) for invalid higher modes, which could result in invalid
reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
In this case we may not have a current frame, while first_field being
set implies we do.
Fixes invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
Several decoders disable those anyway and they are not measurably faster
on x86. They might be somewhat faster on other platforms due to missing
emu edge SIMD, but the gain is not large enough (and those decoders
relevant enough) to justify the added complexity.
The function macro always sets .align 2 before declaring the
function label (since 5c5e1ea3) and always sets the section to
.text (since 278caa6a).
The .align 5 before certain functions, added in fc252eba, were added
before .text and .align were added to the function macro and thus
became useless/unused when the function macro got them.
This restores the original intention, to align the loop entry
points.
Signed-off-by: Martin Storsjö <martin@martin.st>
This file no longer uses the pld instruction at all, all such uses
have been split into hpeldsp_arm.S.
Signed-off-by: Martin Storsjö <martin@martin.st>
There is no point in delaying the check and it avoids bugs with a
half-initialized context.
Fixes invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
They end up overwriting past the line end.
Partially based on a patch by Michael Niedermayer <michaelni@gmx.at>
Bug-Id: vlc/9700
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The decoder currently sets CODEC_FLAG_EMU_EDGE and relies on
get_buffer2() to always provide buffers with linesize == 2 * width.
This is wrong, since we place no such restriction on get_buffer2()
implementations.
Fix this by decoding into internal buffers and copying them to output
frames. Since this is a very obscure decoder, the performance hit should
not be an issue.
The decoder currently sets CODEC_FLAG_EMU_EDGE and relies on
get_buffer2() to always provide buffers with linesize == 2 * width.
This is wrong, since we place no such restriction on get_buffer2()
implementations.
Fix this by decoding into internal buffers and copying them to output
frames. Since this is a very obscure decoder, the performance hit should
not be an issue.
When downmixing 2.1 to 2-channel, if the 2.0 portion is Lt/Rt, sum-difference or dual mono, the actual output will be the same (with the LFE either mixed-in or discarded).
Also, when downmixing an arbitrary layout to 2-channel, if the bitstream contains custom downmix coefficients targeting Lt/Rt, then the output will be Lt/Rt rather than regular Stereo.
If it was set before then we can end up trying to decode a slice without
a valid slice header, which can lead to invalid memory access.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
It has been checking the number of bits in the offset instead of the
actual offset.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Otherwise the generic code will unref them, which can then result in
last_picture_ptr == current_picture_ptr, which causes deadlocks at least
in rv40.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Introduced by 28243b0d35
Intensity compensation is always used once it was encountered, because
v->next_use_ic is never set back to zero.
Reset v->next_use_ic, when resetting v->next_luty/uv.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
According to the spec, the value of XXX_reserved_zero_44bits should be
ignored, so don't report an error when it's not zero.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
