Current GCC versions know how to generate these instructions
properly and avoiding inline asm gives better code. The MULH
function for ARMv5 uses the same instruction and is also not
needed any more.
The MLS64 macro remains since negating an input would normally
not be allowed as it would fail for INT_MIN. In our uses, the
inputs never have this value and thus negating is safe.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
ARM: remove MULL inline asm
mathops: use MUL64 macro where it forms part of other ops
tty: factorise returning error codes.
rawdec: add framerate private option.
x11grab: add framerate private option.
fbdev,v4l2: remove some forgotten uses of AVFormatParameters.time_base.
bktr: don't error when AVFormatParameters.time_base isn't set.
cmdutils: add missing const qualifier
Skip headers not designed to work standalone during 'make checkheaders'.
Add missing #includes to make headers self-contained.
musepack: remove unnecessary #include from mpcdata.h
musepack: remove extraneous mpcdata.h inclusions
Fix error check in av_file_map()
Conflicts:
cmdutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prior to ARMv6, the destination registers of the SMULL instruction
must be distinct from the first source register. Marking the
output early-clobber ensures it is allocated unique registers.
This restriction is dropped in ARMv6 and later, so allowing overlap
between input and output registers there might give better code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
ARM: enable UAL syntax in asm.S
v4l2: don't leak video standard string on error.
swscale: Remove disabled code.
avfilter: Surround function only used in debug mode by appropriate #ifdef.
vf_crop: Replace #ifdef DEBUG + av_log() by av_dlog().
build: remove BUILD_ROOT variable
vp8: use av_clip_uintp2() where possible
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This enables UAL syntax for all asm files instead of only those
which happen to be incompatible with the old, deprecated syntax.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (27 commits)
ac3enc: fix LOCAL_ALIGNED usage in count_mantissa_bits()
ac3dsp: do not use the ff_* prefix when referencing ff_ac3_bap_bits.
ac3dsp: fix loop condition in ac3_update_bap_counts_c()
ARM: unbreak build
ac3enc: modify mantissa bit counting to keep bap counts for all values of bap instead of just 0 to 4.
ac3enc: split mantissa bit counting into a separate function.
ac3enc: store per-block/channel bap pointers by reference block in a 2D array rather than in the AC3Block struct.
get_bits: add av_unused tag to cache variable
sws: replace all long with int.
ARM: aacdec: fix constraints on inline asm
ARM: remove unnecessary volatile from inline asm
ARM: add "cc" clobbers to inline asm where needed
ARM: improve FASTDIV asm
ac3enc: use LOCAL_ALIGNED macro
APIchanges: fill in git hash for av_get_pix_fmt_name (0420bd7).
lavu: add av_get_pix_fmt_name() convenience function
cmdutils: remove OPT_FUNC2
swscale: fix crash in bilinear scaling.
vpxenc: add VP8E_SET_STATIC_THRESHOLD mapping
webm: support stereo videos in matroska/webm muxer
...
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
doc/muxers.texi
ffmpeg.c
ffplay.c
libavcodec/ac3enc.c
libavcodec/ac3enc_float.c
libavcodec/avcodec.h
libavcodec/get_bits.h
libavcodec/libvpxenc.c
libavcodec/version.h
libavdevice/libdc1394.c
libavformat/matroskaenc.c
libavutil/avutil.h
libswscale/rgb2rgb.c
libswscale/swscale.c
libswscale/swscale_template.c
libswscale/x86/swscale_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function uses old-style vector operations deprecated in VFPv3.
Some implementations, e.g. Cortex-A9, support them only through
slow software emulation. Cortex-A8 does have this functionality
in hardware, but as it also has NEON, this function is not used
there regardless.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
ffmpeg: get rid of the -vglobal option.
dct32: Add AVX implementation of 32-point DCT
dct32: Change pass 6 permutation to allow for AVX implementation
dct32: port SSE 32-point DCT to YASM
multiple inclusion guard cleanup
avio: document buffer must created with av_malloc() and friends
avio: check AVIOContext malloc failure
swscale: point out an alternative to sws_getContext
svq3: Do initialization after parsing the extradata
add changelog entries for 0.7_beta2
mp3lame: add #include required for AV_RB32 macro.
Conflicts:
Changelog
libavcodec/svq3.c
libavcodec/x86/dct32_sse.c
libavfilter/vsrc_buffer.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Surround memset and ff_vp8_dct_cat_prob by X() in order to fix iOS build
Includes patch by Luca Barbato <lu_zero@gentoo.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master: (30 commits)
AVOptions: make default_val a union, as proposed in AVOption2.
arm/h264pred: add missing argument type.
h264dsp_mmx: place bracket outside #if/#endif block.
lavf/utils: fix ff_interleave_compare_dts corner case.
fate: add 10-bit H264 tests.
h264: do not print "too many references" warning for intra-only.
Enable decoding of high bit depth h264.
Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
Add support for higher QP values in h264.
Add the notion of pixel size in h264 related functions.
Make the h264 loop filter bit depth aware.
Template dsputil_template.c with respect to pixel size, etc.
Template h264idct_template.c with respect to pixel size, etc.
Preparatory patch for high bit depth h264 decoding support.
Move some functions in dsputil.c into a new file dsputil_template.c.
Move the functions in h264idct into a new file h264idct_template.c.
Move the functions in h264pred.c into a new file h264pred_template.c.
Preparatory patch for high bit depth h264 decoding support.
Add pixel formats for 9- and 10-bit yuv420p.
Choose h264 chroma dc dequant function dynamically.
...
Conflicts:
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/alpha/dsputil_alpha.c
libavcodec/arm/dsputil_init_arm.c
libavcodec/arm/dsputil_init_armv6.c
libavcodec/arm/dsputil_init_neon.c
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/h264pred_init_arm.c
libavcodec/bfin/dsputil_bfin.c
libavcodec/dsputil.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
libavcodec/h264_ps.c
libavcodec/h264_refs.c
libavcodec/h264dsp.c
libavcodec/h264idct.c
libavcodec/h264pred.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/options.c
libavcodec/ppc/dsputil_altivec.c
libavcodec/ppc/dsputil_ppc.c
libavcodec/ppc/h264_altivec.c
libavcodec/ps2/dsputil_mmi.c
libavcodec/sh4/dsputil_align.c
libavcodec/sh4/dsputil_sh4.c
libavcodec/sparc/dsputil_vis.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/options.c
libavformat/utils.c
libavutil/pixfmt.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_template.c
tests/ref/seek/lavf_avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AS libavcodec/arm/ac3dsp_armv6.o
ffmpeg-src/libavcodec/arm/ac3dsp_armv6.S: Assembler messages:
ffmpeg-src/libavcodec/arm/ac3dsp_armv6.S:40: Error: selected processor
does not support `movw r8,#0x1fe0'
make[1]: *** [libavcodec/arm/ac3dsp_armv6.o] Error 1
MOVW is ARMv7 way to load constant:
* movw, or move wide, will move a 16-bit constant into a register,
implicitly zeroing the top 16 bits of the target register.
* movt, or move top, will move a 16-bit constant into the top half
of a given register without altering the bottom 16 bits
To load 32 bit constant, movw lower16; movt upper16; is better than
ldr if available, because:
While this approach takes two instructions, it does not require any
extra space to store the constant so both the movw/movt method and the
ldr method will end up using the same amount of memory. Memory
bandwidth is precious in and the movw/movt approach avoids an extra
read on the data side, not to mention the read could have missed the
cache.
But here it is armv6 optimization, so that we have to use ldr.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
psymodel: extend API to include PE and bit allocation.
avio: always compile dyn_buf functions
Remove unnecessary parameter from ff_thread_init() and fix behavior
Revert "aac_latm_dec: use aac context and aac m4ac"
configure: tell user if libva is enabled like the rest of external libs.
Add silence support for AV_SAMPLE_FMT_U8.
avio: make URL_PROTOCOL_FLAG_NESTED_SCHEME internal
avio: deprecate av_url_read_seek
avio: deprecate av_url_read_pause
ac3enc: NEON optimised extract_exponents
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fix partial run when no samples path is specified
ARM: NEON fixed-point forward MDCT
ARM: NEON fixed-point FFT
lavf: bump minor version and add an APIChanges entry for avio changes
avio: simplify url_open_dyn_buf_internal by using avio_alloc_context()
avio: make url_fdopen internal.
avio: make url_open_dyn_packet_buf internal.
avio: avio_ prefix for url_close_dyn_buf
avio: avio_ prefix for url_open_dyn_buf
avio: introduce an AVIOContext.seekable field
ac3enc: use generic fixed-point mdct
lavfi: add fade filter
Change yadif to not use out of picture lines.
lavc: deprecate AVCodecContext.antialias_algo
lavc: mark mb_qmin/mb_qmax for removal on next major bump.
Conflicts:
doc/filters.texi
libavcodec/ac3enc_fixed.h
libavcodec/ac3enc_float.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/vf_fade.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3enc: ARM optimised ac3_compute_matissa_size
ac3: armv6 optimised bit_alloc_calc_bap
fate: simplify fft test rules
avio: document avio_alloc_context.
lavf: make compute_chapters_end less picky.
sierravmd: fix Indeo3 videos
FFT: simplify fft8()
fate: add fixed-point fft/mdct tests
Fixed-point support in fft-test
ape: check that number of seektable entries is equal to number of frames
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
ac3enc: move compute_mantissa_size() to ac3dsp
ac3enc: move mant*_cnt and qmant*_ptr out of AC3EncodeContext
Remove support for stripping executables
ac3enc: NEON optimised float_to_fixed24
ac3: move ff_ac3_bit_alloc_calc_bap to ac3dsp
dfa: protect pointer range checks against overflows.
Duplicate: mimic: implement multithreading.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master:
matroskadec: set default duration for simple block
When building for MinGW32 disable strict ANSI compliancy.
ARM: fix ff_apply_window_int16_neon() prototype
configure: check for --as-needed support early
ARM: NEON optimised apply_window_int16()
ac3enc: NEON optimised shift functions
ac3enc: NEON optimised ac3_max_msb_abs_int16 and ac3_exponent_min
mpeg12.c: fix slice threading for mpeg2 field picture mode.
ffmetadec.c: fix compiler warnings.
configure: Don't explicitly disable ffplay or in/outdevices on dos
configure: Remove the explicit disabling of ffserver
configure: Add fork as a dependency to ffserver
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 8b454c352f)
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds NEON optimised versions of all functions in VP8DSPContext.
Based on initial work by Rob Clark.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit a1c1d3c003)
This will be beneficial for use with the audio conversion API without
requiring it to depend on all of dsputil.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit c73d99e672)
This will be beneficial for use with the audio conversion API without
requiring it to depend on all of dsputil.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This moves the fields needed by asm near the top, before any
structs or other members which complicate the offset calculation.
Modifying other structs will no longer require updating the offsets,
and the asm code is slightly simpler due to the smaller offsets.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit d461a47317)
This moves the fields needed by asm near the top, before any
structs or other members which complicate the offset calculation.
Modifying other structs will no longer require updating the offsets,
and the asm code is slightly simpler due to the smaller offsets.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Apparently Apple platforms do not handle movw/movt relocations
properly, leading to runtime crashes in code using them.
Originally committed as revision 25150 to svn://svn.ffmpeg.org/ffmpeg/trunk
Many H.264 derivatives, like RV40 and VP8, use the H.264 prediction functions
but not the weight/loopfilter functions.
This should reduce the size of builds with one of these derivatives but without
H.264 decoding itself.
Originally committed as revision 24741 to svn://svn.ffmpeg.org/ffmpeg/trunk
This ensures code always goes into the .text section and avoids the
need to specify it explicitly after changing sections.
Originally committed as revision 24095 to svn://svn.ffmpeg.org/ffmpeg/trunk
The TI compiler defines __eabi__ to signal that ARM EABI is in use.
We must check for this in addition to the gcc macro __ARM_EABI__.
Originally committed as revision 23804 to svn://svn.ffmpeg.org/ffmpeg/trunk
The offsets differ depending on configuration, so only check them when
they will actually be used. Presently, this is when NEON is enabled.
Originally committed as revision 23436 to svn://svn.ffmpeg.org/ffmpeg/trunk
This moves the H264-specific functions from DSPContext to the new
H264DSPContext. The code is made conditional on CONFIG_H264DSP
which is set by the codecs requiring it.
The qpel and chroma MC functions are not moved as these are used by
non-h264 code.
Originally committed as revision 22565 to svn://svn.ffmpeg.org/ffmpeg/trunk
