3GPP:
Remove ffac from and move min_snr out of AacPsyBand.
Rearrange AacPsyCoeffs to make it easier to implement energy spreading.
Rename the band[] array to bands[]
Copy energies and thresholds at the end of analysis.
LAME:
Use a loop instead of an if chain in LAME windowing.
There are several places where a buffer is byte-swapped in 16-bit units.
This allows them to share code which can be optimised for various
architectures.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If the function is not inlined, an immmediate cannot be used for the
shift parameter, so the %cl register must be used instead in that case.
This fixes compilation for x86-32 using gcc with --disable-optimizations.
This fixes unexpected name collisions that were occurring with variables
declared within the macros.
It also fixes the fate-acodec-ac3_fixed regression test on x86-32.
This reverts commit cc4d3dd3e2.
revert at authors request due to better impementation being available
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This increases the accuracy of coefficients, leading to improved quality.
Rescaling of the coefficients to full 25-bit accuracy is done rather than
offsetting the exponent values. This requires coefficient scaling to be done
before determining the rematrixing strategy. Also, the rematrixing strategy
calculation must use 64-bit math to prevent overflow due to the higher
precision coefficients.
The Broadcom CrystalHD decoder chips provide hardware video
decoding for a number of video formats. It does so using a
memory:memory interface where a compressed bitstream is fed
in and decompressed pictures are copied out. As such, it works
independent of any graphics hardware in the system.
Features supported in this initial version:
* Support for Linux (using current drivers/library from git.wilsonet.com)
* Support for 70015 hardware
* Formats: MPEG2, MPEG4 Part 2, H.264, VC1 and DivX 3.11 (untested)
* Progressive content
* Non-H.264 Interlaced content
* H.264 MBAFF content
Features missing in this initial version:
* Support for OSX (might work - untested)
* Support for Windows
* Support for 70012 hardware
* H.264 PAFF content
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts the removal of scoefs from AACEncContext.
It resulted in scoefs being a NULL pointer when
search_for_quantizers() is called.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This makes channel coupling more accurate, increasing quality for stereo
content. It also simplifies exponent extraction and mantissa quantization
by no longer needing to apply an offset to the exponents.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts the removal of scoefs from AACEncContext.
It resulted in scoefs being a NULL pointer when
search_for_quantizers() is called.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When decoding latm config, use the corresponding aac context and its
m4ac instead of using NULL and a local variable. This fixes decoding of
audio in MPEG TS from SBTVD (the Brazillian Digital TV Sytem), when
there is no extradata. This is the case when using the decoder with
gst-ffmpeg and a GStreamer mpegts demuxer.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 36864ac354)
Should an AVC-1 in MP4 stream not contain SPS or PPS NAL units,
this BSF is then unable to allocate an output buffer for the
modified stream. Warn that the resulting stream may be unplayable.
Fix roundup issue #2386.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 02dd3666c2)
When decoding latm config, use the corresponding aac context and its
m4ac instead of using NULL and a local variable. This fixes decoding of
audio in MPEG TS from SBTVD (the Brazillian Digital TV Sytem), when
there is no extradata. This is the case when using the decoder with
gst-ffmpeg and a GStreamer mpegts demuxer.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Should an AVC-1 in MP4 stream not contain SPS or PPS NAL units,
this BSF is then unable to allocate an output buffer for the
modified stream. Warn that the resulting stream may be unplayable.
Fix roundup issue #2386.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Currently it is always 4, but this change will allow it to be adjusted when
bandwidth-related features are added such as channel coupling, enhanced
channel coupling, and spectral extension.
(cherry picked from commit 53e35fd340)
Currently it is always 4, but this change will allow it to be adjusted when
bandwidth-related features are added such as channel coupling, enhanced
channel coupling, and spectral extension.
This moves setting the thread count to a minimum of 1 to
frame_thread_init(), allowing a value of zero to propagate
through to the codec if frame threading is not used. This
makes auto-threads work in libx264.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit ff1efc524c)
For intra codecs, ff_thread_finish_setup() is called before decoding starts
automatically. However, get_buffer can only be used before it's called, so
adding this requirement broke frame threading for them. Fixed by moving the
call until after get_buffer is finished.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit ad9791e12b)
This moves setting the thread count to a minimum of 1 to
frame_thread_init(), allowing a value of zero to propagate
through to the codec if frame threading is not used. This
makes auto-threads work in libx264.
Signed-off-by: Mans Rullgard <mans@mansr.com>
For intra codecs, ff_thread_finish_setup() is called before decoding starts
automatically. However, get_buffer can only be used before it's called, so
adding this requirement broke frame threading for them. Fixed by moving the
call until after get_buffer is finished.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 8b454c352f)
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.
Signed-off-by: Mans Rullgard <mans@mansr.com>
decode_init sets bands[0] == 2, so this loop always sets the band table
index (k) to zero.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit a304def1dc)
This avoids the core substream extensions scan when the EXT_AUDIO_ID
field indicates no extensions or only unsupported extensions. The scan
is done only if the value of EXT_AUDIO_ID is unknown or indicates a
present XCh extension which we can decode.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 7e06e0ede3)
There is no need to expand to 16-bits. Just use memcpy() to copy the raw data.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 1108f8998c)
This also adds output buffer size checks for AUDIO and SILENCE block types.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 1574eff3d2)
The size should depend on the output sample size, not the internal bit depth.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit a58bcb40b1)
This avoids the core substream extensions scan when the EXT_AUDIO_ID
field indicates no extensions or only unsupported extensions. The scan
is done only if the value of EXT_AUDIO_ID is unknown or indicates a
present XCh extension which we can decode.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This allows the values to be used without changing C code and is closer to how
the other DEBUG flags work.
If this causes a problem for any user of this flag, please tell me and
ill split the flag in 2.
The 4-tap filters should only access one row/column before the
reference block.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit e0e46cae37)
GCC 4.3 and later are more particular about signedness matching
in vector operations. The operations under if(rangered) were
missing assignments and thus had no effect.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 381efba0ec)
Merging these functions allows merging some loops, which makes the
results (particularly after SIMD optimizations) much faster.
(cherry picked from commit f8bed30d8b)
Advantage is that it allows us to combine several loops into a single
one, and these can eventually be merged into the IDCT itself. Also, it
allows us to remove vc1_put_block(), and makes CODEC_FLAG_GRAY faster.
(cherry picked from commit bbfd2e7ab4)
GCC 4.3 and later are more particular about signedness matching
in vector operations. The operations under if(rangered) were
missing assignments and thus had no effect.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Advantage is that it allows us to combine several loops into a single
one, and these can eventually be merged into the IDCT itself. Also, it
allows us to remove vc1_put_block(), and makes CODEC_FLAG_GRAY faster.
Advanced profile never uses "range reduction", so vc1_put_block() quite
literally just calls put_pixels_clamped() from vc1_decode_i_blocks_adv().
By inlining the function, we can prevent calling IDCT8x8 if
CODEC_FLAG_GRAY is set, and we don't have to scale the coeffs in the
[0,256] range, but can instead use put_signed_pixels_clamped().
(cherry picked from commit 70aa916e46)
