* commit 'b08caa87c35a768ec0abb16b1e99c3a85f1df28e':
nvenc: H264 and HEVC encoders
Conflicts:
Changelog
configure
libavcodec/Makefile
libavcodec/version.h
This implementation is merged under the name nvenc_b*
Merged-by: Michael Niedermayer <michaelni@gmx.at>
WebPAnimEncoder API is a combination of encoder (WebPEncoder) and muxer
(WebPMux). It performs several optimizations to make it more efficient
than the combination of WebPEncode() and native ffmpeg muxer.
When WebPAnimEncoder API is used:
- In the encoder layer: we use WebPAnimEncoderAdd() instead of
WebPEncode().
- The muxer layer: works like a raw muxer.
On the other hand, when WebPAnimEncoder API isn't available, the old code is
used as it is:
- In the codec layer: WebPEncode is used to encode each frame
- In the muxer layer: ffmpeg muxer is used
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Sufficiently new nvenc hardware (GM20x or later) has support for H.265
encoding. This works the same as the H.264 encoder except the
codec parameters are different.
Due to the fact that common codec parameters are not shareable, there's
quite a bit of conditional logic you'd wish we could do without, but
such is life.
Signed-off-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
* commit 'b21af32aed7e343f962753943e9f16baedfb1750':
lavc: Prefer x264 over openh264 if both libraries are available
See: ddae03f69b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Anshul Maheshwari <anshul.ffmpeg@gmail.com>
To test Closed caption use following command
ffmpeg -f lavfi -i "movie=input.ts[out0+subcc]" -map s output.srt
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Compared to existing, common opensource H264 encoders, this can be
useful since it has got a different license (BSD instead of GPL).
Performance- and qualitywise it is comparable to x264 in ultrafast
mode.
Hooking it up as an encoder in libavcodec also simplifies comparing
it against other common encoders.
This requires OpenH264 1.3 or newer. Since the OpenH264 API and ABI
changes frequently, only releases are supported.
To take advantage of the OpenH264 patent offer, the OpenH264 library
must not be redistributed, but downloaded at runtime at the end-user's
system.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure the default behaviour of using the internal encoder
stays the same regardless if libtwolame is enabled or not (as for
any external library).
This fixes fate-lavf-mpg if libav is built with libtwolame enabled.
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Based off the srt encoder. The following features are unimplemented:
- fonts, colors, sizes
- alignment and positioning
The rest works well. For example, use ffmpeg to convert subtitles into the .vtt format:
ffmpeg -i input.srt output.vtt
Signed-off-by: Aman Gupta <ffmpeg@tmm1.net>
Signed-off-by: Clément Bœsch <u@pkh.me>
* commit 'b70d7a4ac72d23f3448f3b08b770fdf5f57de222':
lavc: add a native Opus decoder.
Conflicts:
Changelog
configure
libavcodec/version.h
Fate tests pass with both avresample as well as swresample based opus decoder, but
are disabled (reference files are very large so i want to think a day or 2 about
if theres an alternative or if they could be avoided, they also dont match the
official samples)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
It leverages the new hwaccel 1.2 features:
- get_buffer2 is never called
- the internal context is automatically initialized/deinitialized
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '6f273093e54cba130f3ffde3d6433e74baa4ad89':
LucasArts SMUSH VIMA audio decoder
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavcodec/vima.c
This commit adds a AV_CODEC_ID_ADPCM_VIMA alias in addition to the previously
used AV_CODEC_ID_VIMA, as well as a AVCodec with name "adpcm_vima" in addition
to the previously used name "vima"
These changes are needed for compatibility with the renamed codec in libav
See: b18357326c and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Further performance improvements and security fixes by
Vittorio Giovara, Luca Barbato and Diego Biurrun.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Additional fixes and enhancements by Vittorio Giovara, Gonzalo Garramuno,
Nicolas George, Paul B Mahol and Michael Niedermayer.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This makes the USE_FLOATS == 0 available to the end user
More float optimizations can easily be added as well now
common code should be factored out into a common file once all
fixed point & floating point optimizations are done, this is to
avoid having to move code back and forth between files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: remove mp3_header_(de)compress bitstream filters
Conflicts:
Changelog
libavcodec/mp3_header_compress_bsf.c
libavcodec/mp3_header_decompress_bsf.c
The decompress filter is left in place for interoperability and support of
files that used the compress filter.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
XvMC has long ago been superseded by newer acceleration APIs, such as
VDPAU, and few downstreams still support it. Furthermore XvMC is not
implemented within the hwaccel framework, but requires its own specific
code in the MPEG-1/2 decoder, which is a maintenance burden.
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Diego Biurrun <diego@biurrun.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Initially written by Guillaume Martres <smarter@ubuntu.com> as a GSoC
project. Further contributions by the OpenHEVC project and other
developers, namely:
Mickaël Raulet <mraulet@insa-rennes.fr>
Seppo Tomperi <seppo.tomperi@vtt.fi>
Gildas Cocherel <gildas.cocherel@laposte.net>
Khaled Jerbi <khaled_jerbi@yahoo.fr>
Wassim Hamidouche <wassim.hamidouche@insa-rennes.fr>
Vittorio Giovara <vittorio.giovara@gmail.com>
Jan Ekström <jeebjp@gmail.com>
Anton Khirnov <anton@khirnov.net>
Martin Storsjö <martin@martin.st>
Luca Barbato <lu_zero@gentoo.org>
Yusuke Nakamura <muken.the.vfrmaniac@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Based on a patch by Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-December/136677.html
The original patch was rebased by Tudor SUCIU <tudor.suciu@gmail.com>.
Lots of additional features and fixes are made by me.
Fixes ticket #2086.
Changes since last version:
- change default page to all pages
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit bf36dc50ea, reversing
changes made to b7fc2693c7.
Conflicts:
libavcodec/h264.c
Keeping support for the old VDPAU API has been requested by our VDPAU maintainer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
