Unfortunately this was not explicitly documented and thus
might be risky.
But all uses I could find in FFmpeg and one in VLC had a memleak
in these cases, and I could not find any that relied on the previous
behaviour.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
~560 → ~500 decicycles
This is following the comments from Michael in
https://ffmpeg.org/pipermail/ffmpeg-devel/2014-August/160599.html
Using 2 registers for accumulator didn't help. On the other hand,
some re-ordering between the movs and psadbw allowed going ~538 to ~500.
The reasoning behind this addition is that various third party
applications are interested in getting some motion information out of a
video "for free" when it is available.
It was considered to export other information as well (such as the intra
information about the block, or the quantization) but the structure
might have ended up into a half full-generic, half full of codec
specific cruft. If more information is necessary, it should either be
added in the "flags" field of the AVMotionVector structure, or in
another side-data.
This commit also includes an example exporting them in a CSV stream.
This allows getting rid of the many, slightly differing, implementations
of basically the same thing.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
In order to support metadata being set as an option, it's necessary to be able
to set dictionaries as values.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
this allows disabling and enabling it
it also prevents crashes if vfpv3 and neon are disabled which previously
would have enabled the flag
And last but not least one can enable setend on cpus like cortex-a8 where
its fast but disabled by default
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It was wrongly being exported and used by libavfilter.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This prevents a build failure when bumping.
the uses could easily be updated / removed, if people prefer.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f4c444e17d137c786f0ed2da0e5943df505d5f9e':
Postpone API-incompatible changes until the next bump.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Errors go to stderr, but the cpu stats are non error output for cputest
This fixes echoing the cpu test results
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The arrays are fairly large and could cause problems on some embedded systems
also they are not endian safe as they mix 32 and 8bit
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The rationale is that you have a packed format in form
<greyscale sample> <alpha sample> <greyscale sample> <alpha sample>
and shortening greyscale to 'G' might make one thing about Greenscale instead.
An alias pixel format and color space name are provided for compatibility.
* commit 'bb41115d56930b9f5d59e79dca254d1201246967':
imgutils: Do not declare avpriv_set_systematic_pal2 in the public header
Conflicts:
libavutil/internal.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a238b83b13640e3192d7d4aaad2242f13a9a84a1':
aarch64: use MACH-O const data asm directive in const macro
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '07d8fa58121be8fe315bd51ab760547fe209a745':
fate: add informative cpu test
Conflicts:
tests/fate/libavutil.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
libavutil/cpu-test prints raw and effective cpu flags to STDERR. Detected
cpu flags can be useful for debugging fate errors.
No comparison of the result against a expected result since that would
require fate config specific references.
Up to four instructions less depending on function and instruction set.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69e7336b8e16ee65226fc20381baf537f4b125e6':
avstring: Expose the simple name match function
Conflicts:
libavutil/avstring.c
libavutil/avstring.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Only 8-bit and 10-bit idct_dc() functions are included (adding others should be trivial).
Benchmarks on an Intel Core i5-4200U:
idct8x8_dc
SSE2 MMXEXT C
cycles 22 26 57
idct16x16_dc
AVX2 SSE2 C
cycles 27 32 249
idct32x32_dc
AVX2 SSE2 C
cycles 62 126 1375
Signed-off-by: James Almer <jamrial@gmail.com>
Reviewed-by: Mickaël Raulet <mraulet@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6869612f5c7d4d2f20f69a5658328a761deadb1c':
arm: Macroize the test for 'setend' CPU instruction support
Conflicts:
libavcodec/arm/h264dsp_init_arm.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in butterflies_float_c() / ff_butterflies_float_vfp() for the
same sample AAC stream:
Before After
Mean StdDev Mean StdDev Confidence Change
Audio decode 1542.8 43.7 1470.5 41.5 100.0% +4.9%
butterflies_float 130.0 11.9 70.2 12.1 100.0% +85.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in vector_fmul_window_c() / ff_vector_fmul_window_vfp() for the
same sample AAC stream:
Before After
Mean StdDev Mean StdDev Confidence Change
Audio decode 1598.2 47.4 1529.2 25.4 100.0% +4.5%
vector_fmul_window 244.0 22.1 188.9 22.3 100.0% +29.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in butterflies_float_c() / ff_butterflies_float_vfp() for the
same sample AAC stream:
Before After
Mean StdDev Mean StdDev Confidence Change
Audio decode 1542.8 43.7 1470.5 41.5 100.0% +4.9%
butterflies_float 130.0 11.9 70.2 12.1 100.0% +85.2%
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in vector_fmul_window_c() / ff_vector_fmul_window_vfp() for the
same sample AAC stream:
Before After
Mean StdDev Mean StdDev Confidence Change
Audio decode 1598.2 47.4 1529.2 25.4 100.0% +4.5%
vector_fmul_window 244.0 22.1 188.9 22.3 100.0% +29.2%
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
MSVC does not allow passing file pointers between libs
This API can thus not work with MSVC and as it was very recently added
and its it was in no release its removial should not cause any problems
A better API will be implemented, but its not finished yet, this revert is
to avoid potentially blocking the release
Found-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
