Use CODEC_CAP_DELAY and CODEC_CAP_SMALL_LAST_FRAME to properly pad and flush
the encoder at the end of encoding. This is needed in order to have all input
samples decoded.
Use CODEC_CAP_DELAY and CODEC_CAP_SMALL_LAST_FRAME to properly pad and flush
the encoder at the end of encoding. This is needed in order to have all input
samples decoded.
* qatar/master:
tiertexseq: set correct block_align for audio
tiertexseq: set audio stream start time to 0
voc/avs: Do not change the sample rate mid-stream.
segafilm: use the sample rate as the time base for audio streams
ea: fix audio pts
psx-str: fix audio pts
vqf: set packet duration
tta demuxer: set packet duration
mpegaudio_parser: do not ignore information from the first parsed frame
mpegaudio_parser: be less picky about the start position
thp: set audio packet durations
avcodec: add a Vorbis parser to get packet duration
vorbisdec: read the previous window flag for long windows
lavc: free the output packet when encoding failed or produced no output.
lavc: preserve avpkt->destruct in ff_alloc_packet().
lavc: clarify the meaning of AVCodecContext.frame_number.
mpegts: Pad the packet buffer in handle_packet().
mpegts: Do not call read_sl_header() when no bytes remain in the buffer.
Conflicts:
libavcodec/mpegaudio_parser.c
libavcodec/version.h
libavformat/mpegts.c
tests/ref/fate/pva-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
We need to set ms_stereo in encode_init() in order to avoid incorrectly
encoding the first frame as non-m/s while flagging it as m/s. Fixes an
uncomfortable pop in the left channel at the start of playback.
CC:libav-stable@libav.org
Currently we have an assert() that prevents the frame from being too large,
but it is more user-friendly to give an error message instead of aborting on
assert(). This condition is quite unlikely due to the minimum bit rate check
in encode_init(), but it is still worth having.
The maximum theoretical frame size is around 17000 bytes. Although in
practice it will generally be much smaller, we require a larger buffer
just to be safe.
CC: libav-stable@libav.org
ff_wma_init() allows up to 50kHz, but this generates an exponent band
size table that requires 65 bands. The code assumes 25 bands in many
places, and using sample rates higher than 48kHz will lead to buffer
overwrites.
CC:libav-stable@libav.org
This is near the theoretical limit for wma frame size and is the most that
our decoder can handle. Allowing higher bit rates will just end up padding
each frame with empty bytes.
Fixes invalid writes for avconv when using very high bit rates.
CC:libav-stable@libav.org
The code only supports 16 and 24 bps currently, 20bps causes
out of array reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When reading sequentially, we are using the actual flag from the previous
frame, but when seeking we do not know what the previous window flag was, so
we need to read it from the bitstream.
This fixes some out of global array accesses of dither_tab.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
qpeg should probably be changed to use the checked bytestream reader.
But for now this fixes it and is significantly less work.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (29 commits)
amrwb: remove duplicate arguments from extrapolate_isf().
amrwb: error out early if mode is invalid.
h264: change underread for 10bit QPEL to overread.
matroska: check buffer size for RM-style byte reordering.
vp8: disable mmx functions with sse/sse2 counterparts on x86-64.
vp8: change int stride to ptrdiff_t stride.
wma: fix invalid buffer size assumptions causing random overreads.
Windows Media Audio Lossless decoder
rv10/20: Fix slice overflow with checked bitstream reader.
h263dec: Disallow width/height changing with frame threads.
rv10/20: Fix a buffer overread caused by losing track of the remaining buffer size.
rmdec: Honor .RMF tag size rather than assuming 18.
g722: Fix the QMF scaling
r3d: don't set codec timebase.
electronicarts: set timebase for tgv video.
electronicarts: parse the framerate for cmv video.
ogg: don't set codec timebase
electronicarts: don't set codec timebase
avs: don't set codec timebase
wavpack: Fix an integer overflow
...
Conflicts:
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/fraps.c
libavcodec/h264.c
libavcodec/mpeg4videodec.c
libavcodec/mpegvideo.c
libavcodec/msmpeg4.c
libavcodec/pnmdec.c
libavcodec/qpeg.c
libavcodec/rawenc.c
libavcodec/ulti.c
libavcodec/vcr1.c
libavcodec/version.h
libavcodec/wmalosslessdec.c
libavformat/electronicarts.c
libswscale/ppc/yuv2rgb_altivec.c
tests/ref/acodec/g722
tests/ref/fate/ea-cmv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prevents warnings because the dst and src overlap (are the same) in the
memcpy() inside the function.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Prevents using the invalid mode as an index in a static array, which
would generate invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Decodes 16-bit WMA Lossless encoded files. 24-bit is not supported yet.
Bitstream parser written by Andreas Öman with contributions from
Baptiste Coudurier and Ulion.
Includes a number of bug-fixes from Benjamin Larsson, Michael Niedermayer and
Konstantin Shishkov, shine and polish by Diego Biurrun.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Fixes out of bounds read.
Checked against SMPTE 421M-2006
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes clipping if the encoder input used the full 16 bit
input range (samples with a magnitude below 16383 worked fine).
The filtered subband samples should be 15 bit maximum, while
the code earlier produced them scaled to 16 bit.
This makes the decoder output have double the magnitude
compared to before.
The spec reference samples doesn't test the QMF at all, which
was why this part slipped past initially.
Signed-off-by: Martin Storsjö <martin@martin.st>
Integer Overflow Checker detected an integer
overflow while FATE was running.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: error out on invalid bitdepth.
aacsbr: use a swap index for the Y matrix rather than copy buffers.
huffyuv: do not abort on unknown pix_fmt; instead, return an error.
lcl: return negative error codes on decode_init() errors.
rtpenc: Use MB info side data for splitting H263 packets for RFC 2190
h263enc: Add an option for outputting info about MBs as side data
avpacket: Add a function for shrinking already allocated side data
nellymoserdec: Saner and faster IMDCT windowing
Conflicts:
doc/APIchanges
libavcodec/avpacket.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes invalid reads while initializing the dequant tables, which uses
the bit depth to determine the QP table size.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This is based on the reference implementation and fixes
a global out of array read.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a out of global array read.
This change is based on the reference mpc imlementation.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It appears there are corner cases with damaged input that can lead
to small overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Code ported from qatar/master, please see there for per line authorship.
Main authors AFAIK are Ronald and Justin. I have no authorship on this.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Its not clear from the spec what to do with values larger than 127
so iam opting for the safe side and ask for a sample.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With the encode2 API, encoders allocate huge packets to be
sure they have enough room (a typical case is mpeg4, which
allocs ~10M for 1280x768 yuv420p) but only actually use a
very small part of the buffer.
ProRes codes chroma blocks in 444 mode in different order than luma blocks,
so make both decoder and encoder read/write chroma blocks in right order.
Reported by Phil Barrett
[alex.converse@mgail.com]
Move code to get_che()
Update for AAC new channel configuration interface
Only set chan_config if output_configure succeeds.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
This is somewhat redundant as no decoder should call get_buffer() with such argument.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ALS spec:
11.6.3.1.1 Quantization and encoding of parcor coefficients
...
In all cases the resulting quantized values ak are restricted to the range [-64,63].
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
adpcm: Clip step_index values read from the bitstream at the beginning of each frame.
oma: don't read beyond end of leaf_table.
doxygen: Remove documentation for non-existing parameters; misc small fixes.
Indeo3: fix crashes on corrupt bitstreams.
msmpeg4: Replace forward declaration by proper #include.
segment: implement wrap around
avf: reorder AVStream and AVFormatContext
aacdec: Remove erroneous reference to global gain from the out of bounds scalefactor error message.
Conflicts:
libavcodec/indeo3.c
libavformat/avformat.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Splits at borders of cells are invalid, since it leaves one of the
cells with a width/height of zero. Also, propagate errors on buffer
allocation failures, so we don't continue decoding (which crashes).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
avcodec_default_reget_buffer(): fix compilation in DEBUG mode
fate: Overhaul WavPack coverage
h264: fix mmxext chroma deblock to use correct TC values.
flvdec: Remove the now redundant check for known broken metadata creator
flvdec: Validate index entries added from metadata while reading
rtsp: Handle requests from server to client
movenc: use timestamps instead of frame_size for samples-per-packet
movenc: use the first cluster duration as the tfhd default duration
movenc: factorize calculation of cluster duration into a separate function
doc/APIchanges: fill in missing dates and hashes.
lavc: reorder AVCodecContext fields.
lavc: reorder AVFrame fields.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavformat/flvdec.c
libavformat/movenc.c
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: don't guess r_frame_rate from either stream or codec timebase.
avconv: set discard on input streams automatically.
Fix parser not to clobber has_b_frames when extradata is set.
lavf: don't set codec timebase in avformat_find_stream_info().
avconv: saner output video timebase.
rawdec: set timebase to 1/fps.
avconv: refactor vsync code.
FATE: remove a bunch of useless -vsync 0
cdxl: bit line plane arrangement support
cdxl: remove early check for bpp
cdxl: set pix_fmt PAL8 only if palette is available
Conflicts:
ffmpeg.c
libavcodec/h264_parser.c
libavformat/rawdec.c
tests/fate/demux.mak
tests/fate/ea.mak
tests/fate/h264.mak
tests/fate/prores.mak
tests/fate/video.mak
tests/ref/fate/bethsoft-vid
tests/ref/fate/creatureshock-avs
tests/ref/fate/ea-cmv
tests/ref/fate/interplay-mve-16bit
tests/ref/fate/interplay-mve-8bit
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/fate/qtrle-16bit
tests/ref/fate/qtrle-1bit
tests/ref/fate/real-rv40
tests/ref/fate/rpza
tests/ref/fate/wmv8-drm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Because in contrast to the decoder, the parser does not setup low_delay.
The code in parse_nal_units would always end up setting has_b_frames
to "1", except when stream is explicitly marked as low delay.
Since the parser itself would create 'extradata', simply reopening
the parser would cause this.
This happens for instance in estimate_timings_from_pts(), which causes the
parser to be reopened on the same stream.
This fixes Libav #22 and FFmpeg (trac) #360
CC: libav-stable@libav.org
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
(commit 31ac0ac29b)
Comments and description adapted by Reinhard Tartler.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/master: (34 commits)
mlp_parser: fix the channel mask value used for the top surround channel
vorbisenc: check all allocations for failure
roqaudioenc: return AVERROR codes instead of -1
roqaudioenc: set correct bit rate
roqaudioenc: use AVCodecContext.frame_size correctly.
roqaudioenc: remove unneeded sample_fmt check
ra144enc: use int16_t* for input samples rather than void*
ra144enc: set AVCodecContext.coded_frame
ra144enc: remove unneeded sample_fmt check
nellymoserenc: set AVCodecContext.coded_frame
nellymoserenc: improve error checking in encode_init()
nellymoserenc: return AVERROR codes instead of -1
libvorbis: improve error checking in oggvorbis_encode_init()
mpegaudioenc: return AVERROR codes instead of -1
libfaac: improve error checking and handling in Faac_encode_init()
avutil: add AVERROR_UNKNOWN
check for coded_frame allocation failure in several audio encoders
audio encoders: do not set coded_frame->key_frame.
g722enc: check for trellis data allocation error
libspeexenc: export encoder delay through AVCodecContext.delay
...
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/fraps.c
libavcodec/kgv1dec.c
libavcodec/libfaac.c
libavcodec/libgsm.c
libavcodec/libvorbis.c
libavcodec/mlp_parser.c
libavcodec/roqaudioenc.c
libavcodec/vorbisenc.c
libavutil/avutil.h
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is not allowed to change mid-stream like it does currently. Instead we need
to buffer the first 8 frames before returning them as a single packet, then
only return single frame packets after that.
* qatar/master:
docs: use -bsf:[vas] instead of -[vas]bsf.
mpegaudiodec: Prevent premature clipping of mp3 input buffer.
lavf: move the packet keyframe setting code.
oggenc: free comment header for all codecs
lcl: error out if uncompressed input buffer is smaller than framesize.
mjpeg: abort decoding if packet is too large.
golomb: use HAVE_BITS_REMAINING() macro to prevent infloop on EOF.
get_bits: add HAVE_BITS_REMAINING macro.
lavf/output-example: use new audio encoding API correctly.
lavf/output-example: more proper usage of the new API.
tiff: Prevent overreads in the type_sizes array.
tiff: Make the TIFF_LONG and TIFF_SHORT types unsigned.
apetag: do not leak memory if avio_read() fails
apetag: propagate errors.
SBR DSP x86: implement SSE sbr_hf_g_filt
SBR DSP x86: implement SSE sbr_sum_square_sse
SBR DSP: use intptr_t for the ixh parameter.
Conflicts:
doc/bitstream_filters.texi
doc/examples/muxing.c
doc/ffmpeg.texi
libavcodec/golomb.h
libavcodec/x86/Makefile
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prevents crash when trying to copy from a non-existing plane in e.g.
a RGB32 reference image to a YUV420P target image
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Instead of clipping extrasize based on EXTRABYTES, clip based on the
amount of buffer actually left. Without this fix, there are warbles
and other distortions in the test case below.
http://kevincennis.com/mix/assets/sounds/1901_voxfx.mp3
This prevents crashes when trying to read beyond the end of the buffer
while decoding frame data.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (40 commits)
swf: check return values for av_get/new_packet().
wavpack: Don't shift minclip/maxclip
rtpenc: Expose the max packet size via an avoption
rtpenc: Move max_packet_size to a context variable
rtpenc: Add an option for not sending RTCP packets
lavc: drop encode() support for video.
snowenc: switch to encode2().
snowenc: don't abuse input picture for storing information.
a64multienc: switch to encode2().
a64multienc: don't write into output buffer when there's no output.
libxvid: switch to encode2().
tiffenc: switch to encode2().
tiffenc: properly forward error codes in encode_frame().
lavc: drop libdirac encoder.
gifenc: switch to encode2().
libvpxenc: switch to encode2().
flashsvenc: switch to encode2().
Remove libpostproc.
lcl: don't overwrite input memory.
swscale: take first/lastline over/underflows into account for MMX.
...
Conflicts:
.gitignore
Makefile
cmdutils.c
configure
doc/APIchanges
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/libdiracenc.c
libavcodec/libxvidff.c
libavcodec/qtrleenc.c
libavcodec/tiffenc.c
libavcodec/utils.c
libavformat/mov.c
libavformat/movenc.c
libpostproc/Makefile
libpostproc/postprocess.c
libpostproc/postprocess.h
libpostproc/postprocess_altivec_template.c
libpostproc/postprocess_internal.h
libpostproc/postprocess_template.c
libswscale/swscale.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Unrolling the main loop to process, instead of 4 elements:
- 8: minor gain of 2 cycles (not worth the extra object size)
- 2: loss of 8 cycles.
Assigning STEP to a register is a loss. Output address (Y) is almost always
unaligned.
Timings:
- C (32/64 bits): 117/109 cycles
- SSE: 57 cycles
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The 32bits targets have been compiled with -mfpmath=sse for proper reference.
sbr_sum_square C /32bits: 82c (unrolled)/102c
C /64bits: 69c (unrolled)/82c
SSE/32bits: 42c
SSE/64bits: 31c
Use of SSE4.1 dpps to perform the final sum is slower.
Not unrolling to perform 8 operations in a loop yields 10 more cycles.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Since we are clipping before we shift the values to
16 or 32 bits, we should not shift the min/max clip
values to compensate.
Fixes 8 and 24 bit lossy decoding.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the PNG filter is enabled, a PNG-style filter will run over the
input buffer, writing into the buffer. Therefore, if no zlib compression
was used, ensure that we copy into a temporary buffer, otherwise we
overwrite user-provided input data.
This prevents crashers and errors further down when reading nodes in the
empty tree.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
dxva2: don't check for DXVA_PictureParameters->wDecodedPictureIndex
img2: split muxer and demuxer into separate files
rm: prevent infinite loops for index parsing.
aac: fix infinite loop on end-of-frame with sequence of 1-bits.
mov: Add more HDV and XDCAM FourCCs.
lavf: don't set AVCodecContext.has_b_frames in compute_pkt_fields().
rmdec: when using INT4 deinterleaving, error out if sub_packet_h <= 1.
cdxl: correctly synchronize video timestamps to audio
mlpdec_parser: fix a few channel layouts.
Add channel names to channel_names[] array for channels added in b2890f5
movenc: Buffer the mdat for the initial moov fragment, too
flvdec: Ignore the index if the ignidx flag is set
flvdec: Fix indentation
movdec: Don't parse all fragments if ignidx is set
movdec: Restart parsing root-level atoms at the right spot
prores: use natural integer type for the codebook index
mov: Add support for MPEG2 HDV 720p24 (hdv4)
swscale: K&R formatting cosmetics (part I)
swscale: variable declaration and placement cosmetics
Conflicts:
configure
libavcodec/aacdec.c
libavcodec/mlp_parser.c
libavformat/flvdec.c
libavformat/img2.c
libavformat/isom.h
libavformat/mov.c
libavformat/movenc.c
libswscale/rgb2rgb.c
libswscale/rgb2rgb_template.c
libswscale/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The operations that use it require it to be promoted to a larger (natural)
type and thus perform sign extension on it.
While an optimal compiler may account for this, gcc 4.6 (for x86 Windows)
fails. Using the natural integer type provides a 2% speedup for Win64
and 1% for Win32.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
mpegvideo_enc: only allocate output packet when we know there will be output
Add names for more channel layouts to the channel layout map.
sunrast: Add a sample request for RMP_RAW colormap.
avcodec: do not override pts or duration from the audio encoder
Add prores regression test.
Enable already existing rso regression test.
Add regression test for "sox" format muxer/demuxer.
Add dpx encoding regression test.
swscale: K&R formatting cosmetics for PowerPC code (part I/II)
img2: Use ff_guess_image2_codec(filename) shorthand where appropriate.
Clarify licensing information about files borrowed from libjpeg.
Mark mutable static data const where appropriate.
avplay: fix -threads option
dvbsubdec: avoid undefined signed left shift in RGBA macro
mlpdec: use av_log_ask_for_sample()
gif: K&R formatting cosmetics
png: make .long_name more descriptive
movdec: Adjust keyframe flagging in fragmented files
rv34: change most "int stride" into "ptrdiff_t stride".
Conflicts:
avprobe.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/mpegvideo_enc.c
libavcodec/pngenc.c
libavcodec/x86/v210-init.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_drawtext.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_setpts.c
libavfilter/vf_settb.c
libavformat/img2.c
libavutil/audioconvert.c
tests/codec-regression.sh
tests/lavf-regression.sh
tests/ref/lavf/dpx
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (36 commits)
adpcmenc: Use correct frame_size for Yamaha ADPCM.
avcodec: add ff_samples_to_time_base() convenience function to internal.h
adx parser: set duration
mlp parser: set duration instead of frame_size
gsm parser: set duration
mpegaudio parser: set duration instead of frame_size
(e)ac3 parser: set duration instead of frame_size
flac parser: set duration instead of frame_size
avcodec: add duration field to AVCodecParserContext
avutil: add av_rescale_q_rnd() to allow different rounding
pnmdec: remove useless .pix_fmts
libmp3lame: support float and s32 sample formats
libmp3lame: renaming, rearrangement, alignment, and comments
libmp3lame: use the LAME default bit rate
libmp3lame: use avpriv_mpegaudio_decode_header() for output frame parsing
libmp3lame: cosmetics: remove some pointless comments
libmp3lame: convert some debugging code to av_dlog()
libmp3lame: remove outdated comment.
libmp3lame: do not set coded_frame->key_frame.
libmp3lame: improve error handling in MP3lame_encode_init()
...
Conflicts:
doc/APIchanges
libavcodec/libmp3lame.c
libavcodec/pcxenc.c
libavcodec/pnmdec.c
libavcodec/pnmenc.c
libavcodec/sgienc.c
libavcodec/utils.c
libavformat/hls.c
libavutil/avutil.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents having to sign-extend on 64-bit systems with 32-bit ints,
such as x86-64. Also fixes crashes on systems where we don't do it and
arguments are not in registers, such as Win64 for all weight functions.
