* qatar/master:
pixdesc: mark pseudopaletted formats with a special flag.
avconv: switch to avcodec_encode_video2().
libx264: implement encode2().
libx264: split extradata writing out of encode_nals().
lavc: add avcodec_encode_video2() that encodes from an AVFrame -> AVPacket
cmdutils: update copyright year to 2012.
swscale: sign-extend integer function argument to qword on x86-64.
x86inc: support yasm -f win64 flag also.
h264: manually save/restore XMM registers for functions using INIT_MMX.
x86inc: allow manual use of WIN64_SPILL_XMM.
aacdec: Use correct speaker order for 7.1.
aacdec: Remove incorrect comment.
aacdec: Simplify output configuration.
Remove Sun medialib glue code.
dsputil: set STRIDE_ALIGN to 16 for x86 also.
pngdsp: swap argument inversion.
Conflicts:
cmdutils.c
configure
doc/APIchanges
ffmpeg.c
libavcodec/aacdec.c
libavcodec/dsputil.h
libavcodec/libx264.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/utils.c
libavfilter/vf_scale.c
libavutil/avutil.h
libswscale/mlib/yuv2rgb_mlib.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This changes a number of FATE results, since before this commit, the
timestamps in all tests using rawenc were made up by lavf.
In most cases, the previous timestamps were completely bogus.
In some other cases -- raw formats, mostly h264 -- the new timestamps
are bogus as well. The only difference is that timestamps invented by
the muxer are replaced by timestamps invented by the demuxer.
cscd -- avconv sets output codec timebase from r_frame_rate
and r_frame_rate is in this case some guessed number 31.42 (377/12),
which is not accurate enough to represent all timestamps. This results
in some frames having duplicate pts. Therefore, vsync 0 needs to be
changed to vsync 2 and avconv drops two frames. A proper fix in the
future would be to set output timebase to something saner in avconv.
nuv -- previous timestamps for video were wrong AND the cscd
comment applies, one frame is dropped.
vp8-signbias -- the file contains two frames with identical timestamps,
so -vsync 0 needs to be removed/changed to -vsync 2 and avconv drops one
frame.
vc1-ism -- apparrently either the demuxer lies about timestamps or the
file is broken, since dts == pts on all packets, but reordering clearly
takes place.
The spec says the following speaker mapping is default:
center front speaker
left, right center front speakers,
left, right outside front speakers,
left surround, right surround rear speakers,
front low frequency effects speaker
* qatar/master:
swscale: make yuv2yuv1 use named registers.
h264: mark h264_idct_add8_10 with number of XMM registers.
swscale: fix V plane memory location in bilinear/unscaled RGB/YUYV case.
vp8: always update next_framep[] before returning from decode_frame().
avconv: estimate next_dts from framerate if it is set.
avconv: better next_dts usage.
avconv: rename InputStream.pts to last_dts.
avconv: reduce overloading for InputStream.pts.
avconv: rename InputStream.next_pts to next_dts.
avconv: rework -t handling for encoding.
avconv: set encoder timebase for subtitles.
pva-demux test: add -vn
swscale: K&R formatting cosmetics for SPARC code
apedec: allow the user to set the maximum number of output samples per call
apedec: do not unnecessarily zero output samples for mono frames
apedec: allocate a single flat buffer for decoded samples
apedec: use sizeof(field) instead of sizeof(type)
swscale: split C output functions into separate file.
swscale: Split C input functions into separate file.
bytestream: Add bytestream2 writing API.
The avconv changes are due to massive regressions and bugs not merged yet.
Conflicts:
ffmpeg.c
libavcodec/vp8.c
libswscale/swscale.c
libswscale/x86/swscale_template.c
tests/fate/demux.mak
tests/ref/lavf/asf
tests/ref/lavf/avi
tests/ref/lavf/mkv
tests/ref/lavf/mpg
tests/ref/lavf/nut
tests/ref/lavf/ogg
tests/ref/lavf/rm
tests/ref/lavf/ts
tests/ref/seek/lavf_avi
tests/ref/seek/lavf_mkv
tests/ref/seek/lavf_rm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes crashes in e.g. PNG decoding with SSE2 enabled. In fact, many
x86 optimizations for codecs assume that our buffer strides are 16-byte
aligned.
Also slightly move around code not allocate a new frame if we won't
decode it. This prevents us from putting undecoded frames in frame
pointers, which (in mt decoding) other threads will use and wait on
as references, causing a deadlock (if we skipped decoding) or a crash
(if we didn't initialized next_framep[] at all).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
It makes sense in some cases to split up the output packet to save on memory
usage (ape frames can be very large), but the current/default size is
arbitrary. Allowing the user to configure this gives more flexibility and
requires minimal additional code.
* qatar/master:
Revert "v210enc: use FFALIGN()"
doxygen: Do not include license boilerplates in Doxygen comment blocks.
avplay: reset decoder flush state when seeking
ape: skip packets with invalid size
ape: calculate final packet size instead of guessing
ape: stop reading after the last frame has been read
ape: return AVERROR_EOF instead of AVERROR(EIO) when demuxing is finished
ape: return error if seeking to the current packet fails in ape_read_packet()
avcodec: Clarify AVFrame member documentation.
v210dec: check for coded_frame allocation failure
v210enc: use stride as it is already calculated
v210enc: use FFALIGN()
v210enc: return proper AVERROR codes instead of -1
v210enc: do not set coded_frame->key_frame
v210enc: check for coded_frame allocation failure
drawtext: add 'fix_bounds' option on coords fixing
drawtext: fix text_{w, h} expression vars
drawtext: add missing braces around an if() block.
Conflicts:
libavcodec/arm/vp8.h
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/v210dec.c
libavfilter/vf_drawtext.c
libavformat/ape.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
FFALIGN doesn't work with non-powers-of-2.
This reverts commit 7ad1b612c8.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Line sizes are only 8-byte aligned, so use unaliged loads
for add_bytes_l2 pointers.
Increasing the alignment requirement to 16 seemed a bit extreme
(png may be used for rather small sizes).
Also fix a mov that had its arguments swapped, leading
add_bytes_l2 being applied on up to 8 bytes too few.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
libx264: fix indentation.
vorbis: fix overflows in floor1[] vector and inverse db table index.
win64: add a XMM clobber test configure option.
movdec: Parse the dvc1 atom
ARM: ac3: fix ac3_bit_alloc_calc_bap_armv6
swscale: K&R formatting cosmetics for Blackfin code
frwu: lowercase the FRWU codec name
movdec: fix dts generation in fragmented files
fate: make acodec-ac3_fixed test output raw AC3
APIchanges: add missing commit hashes
swscale: implement MMX, SSE2 and AVX functions for RGB32 input.
ra144enc: drop pointless "encoder" from .long_name
bethsoftvideo: fix palette reading.
mpc7: use av_fast_padded_malloc()
mpc7: simplify handling of packet sizes that are not a multiple of 4 bytes
doc: decoding Forward Uncompressed is supported
Fix a typo in the x86 asm version of ff_vector_clip_int32()
pcmenc: Do not set avpkt->size.
ff_alloc_packet: modify the size of the packet to match the requested size
Conflicts:
doc/APIchanges
libavcodec/libx264.c
libavcodec/mpc7.c
libavformat/isom.h
libswscale/Makefile
libswscale/bfin/yuv2rgb_bfin.c
tests/ref/fate/bethsoft-vid
tests/ref/seek/ac3_ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This will be useful to test more aggressively for failures to mark XMM
registers as clobbered in Win64 builds, and prevent regressions thereof.
Based on a patch by Ramiro Polla <ramiro.polla@gmail.com>
* qatar/master: (22 commits)
frwu: Employ more meaningful return values.
fraps: Use av_fast_padded_malloc() instead of av_realloc()
mjpegdec: use av_fast_padded_malloc()
eatqi: use av_fast_padded_malloc()
asv1: use av_fast_padded_malloc()
avcodec: Add av_fast_padded_malloc().
swscale: enable dithering in MMX functions.
swscale: make rgb24 function macros slightly smaller.
avcodec.h: Remove some disabled cruft.
swscale: remove obsolete comment.
swscale-test: Drop unused argc and argv arguments from main().
zmbv: Employ more meaningful return values.
zmbvenc: Employ more meaningful return values.
vc1: prevent null pointer dereference on broken files
zmbv: check av_realloc() return values and avoid memleaks on ENOMEM
truespeech: align buffer
ac3: Do not read past the end of ff_ac3_band_start_tab.
dv: Fix small stack overread related to CVE-2011-3929 and CVE-2011-3936.
dv: Fix null pointer dereference due to ach=0
dv: check stype
...
Conflicts:
doc/APIchanges
libavcodec/asv1.c
libavcodec/avcodec.h
libavcodec/eatqi.c
libavcodec/fraps.c
libavcodec/frwu.c
libavcodec/zmbv.c
libavformat/dv.c
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Return the correct number of consumed bytes and set *data_size = 0.
Returned size is 1 too small, leading to that 1 byte being read as the next
frame, which results in an extra blank frame at the beginning of the stream.
Avoids doing malloc/free for each frame.
Also fixes valgrind errors due to use of uninitialized padding bytes.
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Wrapper around av_fast_malloc() that keeps FF_INPUT_BUFFER_PADDING_SIZE
zero-padded bytes at the end of the used buffer.
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
"Copyright (c) 2001 Michael Niedermayer" and "part of Libav" is not likely
not only am i not a libav developer there also was no libav in 2001
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
