Commit Graph

37129 Commits

Author SHA1 Message Date
Justin Ruggles
50f4337a2f lavr: Add "resample_cutoff" option as a duplicate of "cutoff"
Avoids an option name conflict with libavcodec, which is needed in order
to work properly with avconv.
2013-02-23 17:07:54 -05:00
Justin Ruggles
5c7db097eb avconv: pass libavresample options to AVFilterGraph 2013-02-23 17:07:54 -05:00
Justin Ruggles
9f1223562e lavfi: connect libavresample options to af_resample via AVFilterGraph 2013-02-23 17:07:54 -05:00
Justin Ruggles
d7c450436f ac3dec: validate channel output mode against channel count
Damaged frames can lead to a mismatch, which can cause a segfault
due to using an incorrect channel mapping.

CC:libav-stable@libav.org
2013-02-23 16:59:39 -05:00
Diego Biurrun
82ca17ac7a configure: Fix vaapi/vda/vdpau dependency declarations 2013-02-23 21:08:40 +01:00
Diego Biurrun
215cdd35ef configure: Refactor dxva2api.h dependency declarations 2013-02-23 21:08:40 +01:00
Diego Biurrun
4cc4b33f71 build: Add proper infrastructure for adding and checking host CPPFLAGS 2013-02-23 20:23:45 +01:00
Diego Biurrun
2aac411fd4 configure: Simplify VDPAU header check 2013-02-23 20:13:48 +01:00
Diego Biurrun
9840130edf configure: Simplify VDA header and extralibs check 2013-02-23 20:13:48 +01:00
Mans Rullgard
0a8da1a3e5 configure: Do not redundantly list enabled hwaccel libs
The enabled hwaccels are listed later anyway.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2013-02-23 20:13:47 +01:00
Diego Biurrun
7432e87206 configure: Add print_3_columns helper function and use where appropriate 2013-02-23 20:13:47 +01:00
Diego Biurrun
040c565e51 doc: developer: Allow tabs in the vim configuration for Automake files
While we do not use Automake in libav, this allows our config to be
used more globally without introducing unwanted breakage.
2013-02-23 20:13:47 +01:00
Diego Biurrun
94ee7da08d Remove pointless av_cold attributes in header files
The init functions marked as av_cold have to be executed in any case,
so there is no gain from trying to mark paths leading to such functions
as unlikely.
2013-02-23 20:13:47 +01:00
Kostya Shishkov
b5f536d24b pnm: add high-bitdepth PGMYUV support for both encoder and decoder 2013-02-23 16:49:22 +01:00
John Van Sickle
2f325a6fd4 libx264: change i_qfactor to use x264cli's default
This also allows libx264 to modify its i_qfactor value
when using the "-tune" setting. Previously it had a static
value of 1.25

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-02-23 13:34:52 +01:00
Anton Khirnov
d8a74d1d95 qtrle: use AV_LOG_ERROR in an error message. 2013-02-23 13:06:12 +01:00
Anton Khirnov
7b4f91155b qtrle: cosmetics, reformat CHECK_PIXEL_PTR() macro 2013-02-23 13:06:08 +01:00
Anton Khirnov
e106592447 qtrle: add more checks against pixel_ptr being negative.
CC:libav-stable@libav.org
2013-02-23 13:05:54 +01:00
Anton Khirnov
4f3b058c84 cavs: initialize various context tables to 0
Avoids crashes with corrupted files.

CC:libav-stable@libav.org
2013-02-23 13:05:43 +01:00
Anton Khirnov
0dff40bfb9 mlpdec: do not try to allocate a zero-sized output buffer.
CC:libav-stable@libav.org
2013-02-23 13:05:31 +01:00
Anton Khirnov
56daf10e03 mov: use the format context for logging.
CC:libav-stable@libav.org
2013-02-23 13:05:16 +01:00
Anton Khirnov
ddfe1246d9 flicvideo: avoid an infinite loop in byte run compression
When byte_run is 0, pixel_countdown is not touched and the loop will run
forever.

CC:libav-stable@libav.org
2013-02-23 09:22:30 +01:00
Anton Khirnov
067432c1c9 loco: check that there is data left after decoding a plane.
CC:libav-stable@libav.org
2013-02-23 09:20:42 +01:00
Anton Khirnov
de6dfa2bb8 lagarith: avoid infinite loop in lag_rac_refill()
range == 0 happens with corrupted files

CC:libav-stable@libav.org
2013-02-23 09:16:32 +01:00
Anton Khirnov
f935aca44c av_memcpy_backptr: avoid an infinite loop for back = 0
CC:libav-stable@libav.org
2013-02-23 09:16:15 +01:00
Anton Khirnov
8097fc9a2d 4xm: check the return value of read_huffman_tables().
CC:libav-stable@libav.org
2013-02-23 09:13:08 +01:00
Matt Wolenetz
311443f6c7 x86: h264: Don't use redzone in AVX h264_deblock on Win64
This fixes crashes in chromium on win64 on machines with AVX
(crashes that apparently aren't triggered by fate).

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-21 15:02:16 +02:00
Diego Biurrun
a0a1ac0f09 dxva2: Add missing #define to make header compile standalone 2013-02-20 14:24:07 +01:00
Diego Biurrun
3e85b46ecf arm: vp8: Add missing #includes for header to compile standalone 2013-02-20 14:24:07 +01:00
Vicente Jimenez Aguilar
b5ad422bf4 doc: filters: Correct BNF FILTER description
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2013-02-20 11:34:05 +01:00
Diego Biurrun
c9ad5f59aa intreadwrite: tomi: Add missing attributes.h #include for av_always_inline 2013-02-20 00:45:30 +01:00
Diego Biurrun
8a11ce43d0 build: Ensure that output directories for header objects are created 2013-02-20 00:45:30 +01:00
Martin Storsjö
26ee5ca03d h264: Get rid of unnecessary casts
This gets rid of a number of warnings about casts discarding
qualifiers from the pointer target, present since 7ebfb466a.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-20 00:25:29 +02:00
Ronald S. Bultje
fae6fd5b87 h264/svq3: Stop using draw_edges
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:34:33 +02:00
Ronald S. Bultje
7ebfb466ae h264: Don't store intra pcm samples in h->mb
Instead, keep them in the bitstream buffer until we read them verbatim,
this saves a memcpy() and a subsequent clearing of the target buffer.
decode_cabac+decode_mb for a sample file (CAPM3_Sony_D.jsv) goes from
6121.4 to 6095.5 cycles, i.e. 26 cycles faster.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:34:14 +02:00
Ronald S. Bultje
9918f57dcf get_bits: Return pointer to buffer that is the result of the alignment
This allows more transparent mixing of get_bits and whole-byte access
without having to touch get_bits internals.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:33:52 +02:00
Ronald S. Bultje
2ed008204d h264: Add add_pixels4/8() to h264dsp, and remove add_pixels4 from dsputil
These functions are mostly H264-specific (the only other user I can
spot is bink), and this allows us to special-case some functionality
for H264. Also remove the 16-bit-coeff with >8bpp versions (unused)
and merge the duplicate 32-bit-coeff for >8bpp (identical).

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:33:29 +02:00
Ronald S. Bultje
e5ffffe48d h264chroma: Remove duplicate 9/10 bit functions
These functions do the same thing in 16 bit space and don't need
any depth specific clipping.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:33:19 +02:00
Ronald S. Bultje
0c0828ecc5 x86: Use simple nop codes for <= sse (rather than <= mmx)
The "CentaurHauls family 6 model 9 stepping 8" family of CPUs
(flags: fpu vme de pse tsc msr cx8 sep mtrr pge mov pat mmx fxsr sse
up rng rng_en ace ace_en) SIGILLs on long nop codes.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:33:19 +02:00
Ronald S. Bultje
f859678f3f vp56: Remove clear_blocks call, and clear alpha plane U/V DC only
The non-alpha and alpha-Y planes are cleared in the idct_put/add()
calls. For the alpha U/V planes, we only care about the DC for entropy
context prediction purposes, the rest of the data is unused.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-19 22:33:11 +02:00
Daniel Kang
9acd23d655 x86: dsputil: Fix h263 loop filter link error in some configurations
This was caused by unconditionally referencing a conditionally compiled
table. Now the code is also compiled conditionally.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2013-02-18 17:09:00 +01:00
Daniel Kang
7a03145ed7 x86: dsputil: int --> ptrdiff_t for ff_put_pixels16_mmxext line_size param
This avoids SIMD-optimized functions having to sign-extend their
line size argument manually to be able to do pointer arithmetic.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2013-02-18 15:23:03 +01:00
Vicente Jimenez Aguilar
202b5f6deb doc: Fix some obsolete references to av* tools as ff* tools
Signed-off-by: Diego Biurrun <diego@biurrun.de>

CC: libav-stable@libav.org
2013-02-18 13:04:29 +01:00
Matti Hamalainen
7f3624dc81 svq3: unbreak decoding
a7d2861d36 removed necessary braces.
2013-02-18 02:55:07 +01:00
Luca Barbato
aa11cb7931 build: make audio_frame_queue a stand-alone component
Encoders requiring it have the dependency expressed in the
configure.
2013-02-17 22:05:18 +01:00
Diego Biurrun
870a0c669e build: The libopencore-amrnb encoder depends on audio_frame_queue
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-02-17 12:03:25 +01:00
Diego Biurrun
8837f4396a libopencore-amrwb: Make AMR-WB ifdeffery more precise
The library might provide an encoder in the future, so it's better to
check for the presence of the decoder rather than just the library.

CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-02-17 12:03:25 +01:00
Diego Biurrun
e6bda9a9fd libopencore-amr: Conditionally compile decoder and encoder bits
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-02-17 12:03:25 +01:00
Diego Biurrun
56632fef65 libopencore-amrnb: cosmetics: Group all encoder-related code together
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-02-17 12:03:24 +01:00
Luca Barbato
0b70fb1d51 dsputil: convert remaining op_pixels_func
Convert to diffptr_t the line_size parameters still int.

Remove all the warnings in dsputil.c
2013-02-17 12:03:24 +01:00