The caller does not expect this, and in case of adding new streams would then
not even be able to deallocate them anymore.
This reverts a hunk from "avformat: Use av_reallocp_array() where suitable"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The caller does not expect this and there are variables left that index to otherwise
deallocated data.
This reverts a hunk from "avformat: Use av_reallocp_array() where suitable"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Implementing support for end trimming Opus in Matroska by making
use of the DiscardPadding value from the container and discarding
the samples accordingly.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8b524ab0c43c1767919530abb79d3656113cdc47':
movenc: Add a warning message if conflicting options have been specified
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In order to represent the codec delay accurately in Matroska, a
new element CodecDelay has been introduced. It contains the
overall delay added by the codec in nanoseconds. This patch adds
support for muxing CodecDelay value in the container.
Matroska spec for CodecDelay element can be found here:
http://matroska.org/technical/specs/index.html#CodecDelay
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Support for end trimming Opus in Matroska is implemented by using
the DiscardPadding container element in the Block data. The last
chunk is stored as a Block instead of SimpleBlock and the
trimming information is stored and used to discard samples that
were padded by the Opus codec. This patch adds support for muxing
DiscardPadding element into the container with appropriate value.
Matroska spec for the DiscardPadding element can be found here:
http://matroska.org/technical/specs/index.html#DiscardPadding
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure the faststart vs fragmentation check works as
intended when fragmentation is enabled due to using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes warnings about making integers from pointers without
a cast, and avoids the theoretical case where the lower 32 bits of
the pointer would all be zero where the implicit cast wouldn't give
the right result.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes a bunch of possible overread in avformat with the idiom p +=
strcspn(p, "\n") + 1 (strcspn() can focus on the trailing '\0' if no
'\n' is found, so the +1 leads to an overread).
Note on lavf/matroskaenc: no extra subtitles.o Makefile dependency is
added because only the header is required for ff_subtitles_next_line().
Note on lavf/mpsubdec: code gets slightly complex to avoid an infinite
loop in the probing since there is no more forced increment.
* qatar/master:
lavf: fix the comparison in an overflow check
Conflicts:
libavformat/utils.c
See: a5d67bc796
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ee191cab0dc44700f26c5784e2adeb6a779651b':
dv: Add a guard to not overread the ppcm array
See: 3669915e93
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
matroskaenc: Allow chapters to be written in trailer
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows creation of frame accurate chapter marks from sources like
DVD and BD where the precise chapter location is not known until the
chapter mark has been reached during reading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'd719981273bc779c7d1e879d88404fd867f93a0e':
4xm: Check that the read track value is non-negative
Conflicts:
libavformat/4xm.c
See: 0838cfdc8a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bcd3ae5b167fb74215520b01d5d810e0c8986ab':
matroskadec: Check that .lang was allocated and set before reading it
Conflicts:
libavformat/matroskadec.c
See: 01fd1aa0ad
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that no read timestamp functions finds packets before the search window in ff_find_last_ts()
which could cause an infinite loop
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an infinite loop
An alternative fix would be to revert d73cbc22c5
but that would worsen error resilience.
Found-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Skip the "\r" as normal text. Otherwise it will be the first character
of the string passed to sscanf(), which then fill fail to match the
timestamps.
Signed-off-by: Clément Bœsch <u@pkh.me>
* commit '488b2984fece7ad0c2596826fee18e74aa904667':
ape demuxer: check for EOF in potentially long loops
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a7c1689dedd11689edb30088d467ac03f9b8d1cf':
4xm: check that bits per sample is strictly positive
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The check added in df33a58e53 does not work
at all, rather it broke the summing of bitrates completely.
The comparission was wrong way around.
This commit replaces it by a simpler and hopefully clearer check
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fab694dd3931b1c0bc3c598c3f88b1902c14a303':
lavf: move a variable declaration to the block where it's used
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This should improve write performance quite significantly.
---
Tested with both writing a normal mp4, by using the faststart
feature and writing a fragmented mp4 file; all turn out with the
same md5sum as before.
Signed-off-by: Martin Storsjö <martin@martin.st>
Remove the header decoding for PCM audio from mpeg.c and the
20/24bit parts from pcm.c and merge them into a new decoder in
pcm-dvd.c.
The decoder has added support for samples that span multiple
packets and modified 20/24bit group decoding. Both is needed to
decode samples that have been generated with DVD-Lab Pro 2. The
decoding of 16bit PCM and two channel 24bit is identical to
before. No other samples are known to verify the correctness of
the encoding this software does.
The complete list of tested formats is
48kHz/16bit/2-8 channels
48kHz/24bit/2-5 channels
96kHz/16bit/2-4 channels
96kHz/24bit/2 channels
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When streaming to limelight, the app name is either a full
"appname/subaccount" or "appname/_definst_". In the latter case,
the app name can be simplified into simply "appname", but the
authentication hashing assumes the /_definst_ still to be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '310cc4bf82824f09bdd0b9147ed725cdbeaf9bdd':
smoothstreamingenc: Write to a temp file while updating the manifest
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If a client tries to read the file while it's being updated, the client
would get an incomplete manifest. Instead write to a separate temp file
and atomically rename it to replace the previous one.
Signed-off-by: Martin Storsjö <martin@martin.st>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '2bbad1f94cbc5eab0aa2d937bc79d085477d0242':
movenc: Properly free allocated data on failures in mov_write_header
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3559fb97c459c88b4f1d0eef80d55933d3b7fabe':
movenc: Check that tracks->enc exists before trying to free extradata
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d122b01e4ce539269ee2df193b061772c7374f6':
movenc: Check for allocation failures in mov_create_chapter_track
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On failures in the write_trailer function, we could also ignore
the errors and try to finish the file despite these errors (which
would only leave an incomplete chapters track). It's probably better
to signal the error clearly to the caller though (and if this
function failed there's no guarantee that there's enough memory to
finish the trailer either).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b89e8759e053792704741d08cbc41c9ac3c7ed63':
mov: Write tmcd extradata
This commit should make no difference as we had tmcd support
already, which is not changed.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '08504380ddf25d6905e189e9bf52e7a4c771a415':
mov: Refactor codec specific final steps in mov_finalize_stsd_codec
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dc518a3ae21e7b6420131b813cfc6bcdcad26b7e':
mov: Refactor subtitle specific parsing in mov_parse_stsd_subtitle
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a3b53ff062eaccdaa28964899c63520ef2978c2e':
mov: Refactor video specific parsing in mov_parse_stsd_video
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When a id3 tag is larger than the amount of space we will probe
give it a score similar to what a .mp3 extension would have given it
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array reads
Found-by: Laurent Butti <laurentb@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1f70a5ad284b33e8b3e2b40a5cb33055419781b7':
mov: use tkhd enabled flag to set the default track
Merged-by: Michael Niedermayer <michaelni@gmx.at>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '6c786765cd5eb794dedd4a0970dfe689b16dfeeb':
movenc: Allow chapters to be written in trailer
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '64af59bc4916fac5578b31c89da13c30b591bddf':
avformat: Fix references to removed av_close_input_file in Doxygen
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows creation of frame accurate chapter marks from sources
like DVD and BD where the precise chapter location is not known until
the chapter mark has been reached during reading.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '22de0f8369f1f3edf1a55e1d275f3c07c617b53e':
mov: Compute max duration among the tracks with a timescale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '39523030108815242178ac5e209c83070bd1baef':
mov: Set the timescale for data streams
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b886f5c2f1e71b3e60e4265c500158d392b4b9a4':
mkv: Allow flushing the current cluster in progress
Conflicts:
libavformat/matroskaenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '59f595921eb2b848a80a74aa81b6bb43038c9ebe':
mkv: Flush the old cluster before writing a new one
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow emitting the current cluster that is being written before
starting a new one, simplifying how to figure out where clusters
are positioned in the output stream (for live streaming).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
WebM files now support inband text tracks, as described in the
following specification:
http://wiki.webmproject.org/webm-metadata/temporal-metadata/webvtt-in-webm
The Matroska demuxer now detects the presence of WebVTT tracks,
synthesizing WebVTT packets (having codec id AV_CODEC_ID_WEBVTT) and
pushing them downstream in the normal way.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Seeking in certain broken files would cause ogg_read_timestamp
to fail because ogg_packet would go into a state where all packets
of stream 1 would be discarded until the end of the stream.
Bug-Id: 553
CC: libav-stable@libav.org
Signed-off-by: Jan Gerber <j@v2v.cc>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This avoids the loss of a packet in many cases if the packet size was wrong.
It also improves detection of packet size changes
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No case is known to have triggered this, but its more correct to check that the
new size differs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Calculate the duration as accurately as possible to improve decoding of samples
where the last frame is smaller than the rest.
Example:
Take lossless-audio/luckynight-partial.tak from the FATE suit and convert it
to TTA muxed into matroska:
ffmpeg -i $(SAMPLES)/lossless-audio/luckynight-partial.tak -c:a tta lucky.mka
The framemd5 output for lucky.mka without this patch:
0, 0, 0, 46080, 184320, 7c3751ddd571d2903c3cf0ab4b3e3d0a
0, 46080, 46080, 46080, 184320, 6b70c782ba1da3f933fde2daa4f96b73
0, 92160, 92160, 46080, 184320, dcf70d89c54b9a4f0b302d4ec4fb302d
0, 138240, 138240, 46080, 184320, 48713ca38b388d2ea4abf5b86ed1226f
0, 184320, 184320, 46080, 184320, 12188a23648e7ebfb07cd6fe9197b2ea
0, 230400, 230400, 46080, 184320, 49653ab8186a5d4a044ed284671a26e0
0, 276480, 276480, 46080, 184320, 5e82c6a7fe58c7ea612c03a0a2927dd4
0, 322560, 322560, 46080, 184320, 83dc449dbd9eab5f2e8ad2b4403d6a21
0, 368640, 368640, 46080, 184320, bdd6b92c23d30978d4e802d305b0fc49
With this patch:
0, 0, 0, 46080, 184320, 7c3751ddd571d2903c3cf0ab4b3e3d0a
0, 46080, 46080, 46080, 184320, 6b70c782ba1da3f933fde2daa4f96b73
0, 92160, 92160, 46080, 184320, dcf70d89c54b9a4f0b302d4ec4fb302d
0, 138240, 138240, 46080, 184320, 48713ca38b388d2ea4abf5b86ed1226f
0, 184320, 184320, 46080, 184320, 12188a23648e7ebfb07cd6fe9197b2ea
0, 230400, 230400, 46080, 184320, 49653ab8186a5d4a044ed284671a26e0
0, 276480, 276480, 46080, 184320, 5e82c6a7fe58c7ea612c03a0a2927dd4
0, 322560, 322560, 46080, 184320, 83dc449dbd9eab5f2e8ad2b4403d6a21
0, 368640, 368640, 46080, 184320, bdd6b92c23d30978d4e802d305b0fc49
0, 414720, 414720, 4230, 16920, b50b440c5bbcecb8e9fbece643447593
The duration without this patch was calculated as 418950000000, which is bigger
than uint32_t and as such stored as 2338172288.
With this patch the duration is correctly calculated as 418950.
Signed-off-by: James Almer <jamrial@gmail.com>
Approved-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In order to encapsuate Opus in Matroska, there is a new element
that has been added to the Matroska Spec, SeekPreRoll. It has the
duration in nanoseconds that has to be decoded before every seek.
Spec: http://matroska.org/technical/specs/index.html#SeekPreRoll
Proposal for encapsulateing Opus in Matroska:
http://wiki.xiph.org/MatroskaOpus
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The mov/mp4 muxer has support for handling negative timestamps
via edit lists (which customarily is used for handling the 1-frame
delay due to B-frames as well).
Using the muxer's native way of handling it is better than using
the generic offsetting. The generic offsetting is a bit too
crude when e.g. the timebase of one track is 1/fps, where the
edit lists can handle it accurately.
Signed-off-by: Martin Storsjö <martin@martin.st>
Uses the 2.5 compatibility header included with the variant of
FFMS2 that uses AviSynth's C-interface. A copy of this header is
now provided in compat/avisynth.
avs_get_row_size_p and avs_get_height_p changed between versions
2.5 and 2.6. Since the avisynth_c.h header that avformat uses
assumes AviSynth 2.6, it would cause 2.5 to crash if given any
kind of real video (the Version() function was known to work,
though).
AvxSynth was unaffected by this issue because, despite being based
on AviSynth 2.5.8 and using 2.5.8's interface version number of 3,
it actually uses 2.6's versions of these functions.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '09c93b1b957f2049ea5fd8fb0e6f4d82680172f2':
hlsenc: Append the last incomplete segment when closing the output
Conflicts:
libavformat/hlsenc.c
See: 4630dfd1eb
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c9031c7c1446a1a63eff7c0bf50d1ee559adf3fb':
hlsenc: Add a proper dependency on the mpegts muxer
Conflicts:
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4b054a3400f728c54470ee6a1eefe1d82420f6a2':
rtpproto: Check the right feature detection macro
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '163a729725c6eb0081b0af41a7279f7d19aee86e':
electronicarts: Let functions always returning the same value return void
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The counter itself shouldn't be wrapped, since it is used for
determining end_pts for the next segment - only wrap the number
used for the segment file name.
Signed-off-by: Martin Storsjö <martin@martin.st>
The hls muxer itself doesn't have any direct (object file level)
dependencies on mpegtsenc.o, and including that object file
directly doesn't ensure that it is registered so that the muxer
actually is accessible.
Signed-off-by: Martin Storsjö <martin@martin.st>
IPPROTO_IPV6 is unrelated here (it's only used in udp.c for
multicast sockopts), check for support for the sockaddr_in6
struct itself.
Signed-off-by: Martin Storsjö <martin@martin.st>
A file with a prepended ID3 tag of an uneven length was found
in the wild.
Check if the wav data starts at an uneven offset and use that
information to correct the seeking calculation in wav_seek_tag,
which used to only seek to even byte positions.
Regression since ac87eaf856
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
* commit '6b58e11a8331690ec32e9869db89ae10c54614e9':
rtpproto: Add an option for writing return packets to the address of the last received packets
Merged-by: Michael Niedermayer <michaelni@gmx.at>
An SDP description normally only contains the target IP address
and port for the packets. This means that we don't really have
any clue where to send the RTCP RR packets - previously they're
sent to the destination IP written in the SDP (at the same port),
which rarely is the actual peer. And if the source for the packets
is on a different port than the destination, it's never correct.
With a new option, we can choose to send the packets to the
address that the latest packet on each socket arrived from.
---
Some may even argue that this should be the default - perhaps,
but I'd rather keep it optional at first. Additionally, I'm not
sure if sending RTCP RR directly back to the source is
desireable for e.g. multicast.
Signed-off-by: Martin Storsjö <martin@martin.st>
If we've received packets on the same socket before, the return
packets are sent to that address. If we've only received packets
on the other socket, try to guess the source port for the other
one assuming the basic +1/-1 logic.
Signed-off-by: Martin Storsjö <martin@martin.st>
Move the sources documentation up below the marker for deprecated
otpions. Also mention the new block parameter, that was added
in 749722209.
Signed-off-by: Martin Storsjö <martin@martin.st>
