* qatar/master:
avcodec: remove AVCodecContext.dsp_mask
avconv: fix a segfault when default encoder for a format doesn't exist.
utvideo: general cosmetics
aac: Handle HE-AACv2 when sniffing a channel order.
movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
xxan: Remove write-only variable in xan_decode_frame_type0().
ivi_common: Initialize a variable at declaration in ff_ivi_decode_blocks().
Conflicts:
ffmpeg.c
libavcodec/utvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This removes all references to AVCodecContext.dsp_mask and marks
it for eviction at the next version bump. It has been superseded
by av_set_cpu_flag_mask() which, unlike this field, works everywhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds a hand-optimized assembly version for get_cabac much like the
existing one, but it works if the table offsets are RIP-relative.
Compared to the non-RIP-relative version this adds 2 lea instructions
and it needs one extra register.
There is a surprisingly large performance improvement over the c version (more
so than the generated assembly seems to suggest) just in get_cabac, I measured
roughly 40% faster for get_cabac on a K8. However, overall the difference is
not that big, I measured roughly 5% on a test clip on a K8 and a Core2.
Hopefully it still compiles on x86 32bit...
v2: incorporated feedback from Loren Merritt to avoid rip-relative movs
for every table, and got rid of unnecessary @GOTPCREL.
v3: apply similar fixes to the the decode_significance functions, and use
same macro arguments for non-pic case.
v4: prettify inline asm arguments, add a non-fast-cmov version (as I expect
the c code to be faster otherwise since both cmov and sbb suck hard on a
Prescott, even can't construct the mask with a 64bit shift as that's just as
terrible - it's quite difficult to find usable instructions on that chip...).
This is tested to work but not on a P4, in theory it _should_ be fast there.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
indeo3: add parens around some macro arguments
h264: use proper PROLOGUE statement for a function using 8 registers.
doc: Update sample Vim config with suitable (function) indentation settings.
dv: Merge dvquant.h into dvdata.c where all other DV tables reside.
dv: Move static tables only used in one place to where they are used.
graphparser: set next to NULL on an entry extracted from inputs list
doc/filters: update documentation.
avconv: flush decoders immediately after an EOF.
avconv: send EOF to vsrc_buffer.
avconv: reindent.
Conflicts:
doc/filters.texi
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vsrc_buffer: fix check from 7ae7c41.
libxvid: Reorder functions to avoid forward declarations; make functions static.
libxvid: drop some pointless dead code
wmal: vertical alignment cosmetics
wmal: Warn about missing bitstream splicing feature and ask for sample.
wmal: Skip seekable_frame_in_packet.
wmal: Drop unused variable num_possible_block_size.
avfiltergraph: make the AVFilterInOut alloc/free API public
graphparser: allow specifying sws flags in the graph description.
graphparser: fix the order of connecting unlabeled links.
graphparser: add avfilter_graph_parse2().
vsrc_buffer: allow using a NULL buffer to signal EOF.
swscale: handle last pixel if lines have an odd width.
qdm2: fix a dubious pointer cast
WMAL: Do not try to read rawpcm coefficients if bits is invalid
mov: Fix detecting there is no sync sample.
tiffdec: K&R cosmetics
avf: has_duration does not check the global one
dsputil: fix optimized emu_edge function on Win64.
Conflicts:
doc/APIchanges
libavcodec/libxvid_rc.c
libavcodec/libxvidff.c
libavcodec/tiff.c
libavcodec/wmalosslessdec.c
libavfilter/avfiltergraph.h
libavfilter/graphparser.c
libavfilter/version.h
libavfilter/vsrc_buffer.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
swscale: K&R formatting cosmetics (part II)
tiffdec: Add a malloc check and refactor another.
faxcompr: Check malloc results and unify return path
configure: escape colons in values written to config.fate
ac3dsp: call femms/emms at the end of float_to_fixed24() for 3DNow and SSE
matroska: Fix leaking memory allocated for laces.
pthread: Fix crash due to fctx->delaying not being cleared.
vp3: Assert on invalid filter_limit values.
h264: fix 10bit biweight functions after recent x86inc.asm fixes.
ffv1: Fix size mismatch in encode_line.
movenc: Remove a dead initialization
git-howto: Explain how to avoid Windows line endings in git checkouts.
build: Move all arch OBJS declarations into arch subdirectory Makefiles.
Conflicts:
configure
libavcodec/vp3.c
libavformat/matroskadec.c
libavutil/Makefile
libswscale/Makefile
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Recent register allocation changes (x86inc.asm update) changed the
register order and thus opcodes for the inner loops. One of them became
>128bytes, which confuses other parts of this function where it jumps
to fixed-offset positions to extend the edge by fixed amounts. A simple
register change fixes this.
Add support for all x86-64 registers
Prefer caller-saved register over callee-saved on WIN64
Support up to 15 function arguments
Also (by Ronald S. Bultje)
Fix up our asm to work with new x86inc.asm.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
* qatar/master: (22 commits)
rv40dsp x86: use only one register, for both increment and loop counter
rv40dsp: implement prescaled versions for biweight.
avconv: use default channel layouts when they are unknown
avconv: parse channel layout string
nutdec: K&R formatting cosmetics
vda: Signal 4 byte NAL headers to the decoder regardless of what's in the extradata
mem: Consistently return NULL for av_malloc(0)
vf_overlay: implement poll_frame()
vf_scale: support named constants for sws flags.
lavc doxy: add all installed headers to doxy groups.
lavc doxy: add avfft to the main lavc group.
lavc doxy: add remaining avcodec.h functions to a misc doxygen group.
lavc doxy: add AVPicture functions to a doxy group.
lavc doxy: add resampling functions to a doxy group.
lavc doxy: replace \ with /
lavc doxy: add encoding functions to a doxy group.
lavc doxy: add decoding functions to a doxy group.
lavc doxy: fix formatting of AV_PKT_DATA_{PARAM_CHANGE,H263_MB_INFO}
lavc doxy: add AVPacket-related stuff to a separate doxy group.
lavc doxy: add core functions/definitions to a doxy group.
...
Conflicts:
ffmpeg.c
libavcodec/avcodec.h
libavcodec/vda.c
libavcodec/x86/rv40dsp.asm
libavfilter/vf_scale.c
libavformat/nutdec.c
libavutil/mem.c
tests/ref/acodec/pcm_s24daud
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Quite often, the original weights are multiple of 512. By prescaling them
by 1/512 when they are computed (once per frame), no intermediate shifting
is needed, and no prescaling on each call either.
The x86 code already used that trick.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
h264: Factorize declaration of mb_sizes array.
vsrc_buffer: when no frame is available, return an error instead of segfaulting.
configure: add dl to frei0r extralibs.
dsputil x86: use SSE float instruction instead of SSE2 integer equivalent
dsputil x86: remove deprecated parameter from scalarproduct_int16 prototype
vp8dsp x86: perform rounding shift with a single instruction
fate: add BMP tests.
swscale: handle complete dimensions for monoblack/white.
aacenc: Mark deinterleave_input_samples argument as const.
vf_unsharp: Mark readonly variable as const.
h264: fix 4:2:2 PCM-macroblocks decoding
Conflicts:
configure
libavcodec/h264.h
libavcodec/x86/dsputil_mmx.c
libavfilter/vf_unsharp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asf: only set index_read if the index contained entries.
cabac: add overread protection to BRANCHLESS_GET_CABAC().
cabac: increment jump locations by one in callers of BRANCHLESS_GET_CABAC().
cabac: remove unused argument from BRANCHLESS_GET_CABAC_UPDATE().
cabac: use struct+offset instead of memory operand in BRANCHLESS_GET_CABAC().
h264: add overread protection to get_cabac_bypass_sign_x86().
h264: reindent get_cabac_bypass_sign_x86().
h264: use struct offsets in get_cabac_bypass_sign_x86().
h264: fix overreads in cabac reader.
wmall: fix seeking.
lagarith: fix buffer overreads.
dvdec: drop unnecessary dv_tablegen.h #include
build: fix doc generation errors in parallel builds
Replace memset(0) by zero initializations.
faandct: Remove FAAN_POSTSCALE define and related code.
dvenc: print allowed profiles if the video doesn't conform to any of them.
avcodec_encode_{audio,video}: only reallocate output packet when it has non-zero size.
FATE: add a test for vp8 with changing frame size.
fate: add kgv1 fate test.
oggdec: calculate correct timestamps in Ogg/FLAC
Conflicts:
libavcodec/4xm.c
libavcodec/cook.c
libavcodec/dvdata.c
libavcodec/dvdsubdec.c
libavcodec/lagarith.c
libavcodec/lagarithrac.c
libavcodec/utils.c
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: ppc: drop stray leftover backslash
build: Only clean the architecture subdirectory we build for.
build: drop some unnecessary dependencies from the H.264 parser
build: prettyprinting cosmetics
libavutil: Remove pointless rational test program.
libavutil: Remove broken and pointless lzo test program.
lavf doxy: expand AVStream.codec doxy.
lavf doxy: improve AVStream.time_base doxy.
lavf doxy: add some basic documentation about reading from the demuxer.
lavf doxy: document passing options to demuxers.
lavf doxy: clarify that an AVPacket contains encoded data.
mpegtsenc: allow user triggered PES packet flushing
APIchanges: mark the place where 0.7 was cut.
APIchanges: mark the place where 0.8 was cut.
APIchanges: fill in missing dates and hashes.
smacker: convert palette and header reading to bytestream2.
alac: convert extradata reading to bytestream2.
Conflicts:
doc/APIchanges
libavcodec/smacker.c
libavcodec/x86/Makefile
libavfilter/Makefile
libavutil/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rv34: error out on size changes with frame threading
aacsbr: Add a debug check to sbr_mapping.
aac: Reset some state variables when turning SBR off
aac: Reset PS parameters on header decode failure.
fate: add wmalossless test.
aacsbr: handle m_max values smaller than 4.
Conflicts:
libavcodec/aacsbr.c
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prevents a signflip in the counter, and a subsequent crash because of
overreads/overwrites.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
They were moved into code under HAVE_YASM and most of them
even into completely disabled code with no reason given
for that in the commit message.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This is even potentially faster in this use-case.
Should fix AAC SBR decoding on machines with SSE but not
SSE2, fixing track issue #1041.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Yasm creates an implicit unaligned text section if "struc" is used
outside of any section:
http://tortall.lighthouseapp.com/projects/78676-yasm/tickets/247
Since yasm only honors the "align" annotation on the first declaration
of a section, this implicit text section causes all text section
alignments to be ignored. Also fixes a yasm warning about it agnoring
alignment.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cook: expand dither_tab[], and make sure indexes into it don't overflow.
xxan: reindent xan_unpack_luma().
xxan: protect against chroma LUT overreads.
xxan: convert to bytestream2 API.
xxan: don't read before start of buffer in av_memcpy_backptr().
vp8: convert mbedge loopfilter x86 assembly to use named arguments.
vp8: convert inner loopfilter x86 assembly to use named arguments.
Conflicts:
libavcodec/xxan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
