* commit '2f3bada63e57345329c4f9b48e9b81b5cfc03d05':
lavf: Add a protocol for SRTP encryption/decryption
rtsp: Support decryption of SRTP signalled via RFC 4568 (SDES)
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ba0c72a9ae1e2954e5dcf920f7b4e9a8f8a22f3e':
build: Remove stray Makefile entry for non-existent VCR1 encoder
rtpdec: Handle more received packets than expected when sending RR
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd0fe217e3990b003b3b3f2c2daaadfb2af590def':
rtpdec: Simplify insertion into the linked list queue
rtpdec: Remove a woefully misplaced comment
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This only takes care of decrypting incoming packets; the outgoing
RTCP packets are not encrypted. This is enough for some use cases,
and signalling crypto keys for use with outgoing RTCP packets
doesn't fit as simply into the API. If the SDP demuxer is hooked
up with custom IO, the return packets can be encrypted e.g. via the
SRTP protocol.
If the SRTP keys aren't available within the SDP, the decryption
can be handled externally as well (when using custom IO).
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this, we'd signal a huge loss rate (due to unsigned
wraparound) if we had received one packet more than expected (that
is, one seq number sent twice). The code has a check for lost_interval
<= 0, but that doesn't do what was intended as long as the variable is
unsigned.
Signed-off-by: Martin Storsjö <martin@martin.st>
The code below the comment does not at all relate to statistics,
and even if moved to the right place, the comment adds little
value.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'abae27ed3acd0a7c54f11760c5be2d2653c4edf8':
rtpdec: Fix the calculation of expected number of packets
fate: vp3: Fix fate-vp3-coeff-level64 test dependencies
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, we always signalled a zero time since the last RTCP
SR, which is dubious.
The code also suggested that this would be the difference in
RTP NTP time units (32.32 fixed point), while it actually is
in in 1/65536 second units. (RFC 3550 section 6.4.1)
Signed-off-by: Martin Storsjö <martin@martin.st>
This brings back some code that was added originally in 4a6cc061
but never was used, and was removed as unused in 4cc843fa. The
code is updated to actually work and is tested to return sane
values.
Signed-off-by: Martin Storsjö <martin@martin.st>
The base_seq variable is set to first_seq - 1 (in
rtp_init_sequence), so no + 1 is needed here.
This avoids reporting 1 lost packet from the start.
Signed-off-by: Martin Storsjö <martin@martin.st>
The question can be answered: No, we do not know the initial sequence
number from the SDP. In certain cases, it can be known from the
RTP-Info response header in RTSP though. (In that case, we use it as
timestamp origin, but not for rtp receiver statistics.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'ed79093222ceb42f0c3a39095a69af0b32be5450':
rtpdec: Add a terminating null byte at the end of the SDES/CNAME
yuv4mpeg: do not use deprecated functions
oggdec: fix faulty cleanup prototype
idcin: return 0 from idcin_read_packet() on success.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is required by RFC 3550 (section 6.5):
The list of items in each chunk MUST be terminated by one or more
null octets, the first of which is interpreted as an item type of
zero to denote the end of the list.
This was implicitly added as padding before, unless the host name
length matched up so no padding was added.
This makes wireshark parse the packets properly if other RTCP items
are appended to the same packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '42805eda554a7fc44341282771531e7837ac72b7':
rtpdec: Store the dynamic payload handler in the rtpdec context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This sends NACK for missed packets and PLI (picture loss indication)
if a depacketizer indicates that it needs a new keyframe, according
to RFC 4585.
This is only enabled if the SDP indicated that feedback is supported
(via the AVPF or SAVPF profile names).
The feedback packets are throttled to a certain maximum interval
(currently 250 ms) to make sure the feedback packets don't eat up
too much bandwidth (which might be counterproductive). The RFC
specifies a more elaborate feedback packet scheduling.
The feedback packets are currently sent independently from normal
RTCP RR packets, which is not totally spec compliant, but works
fine in the environments I've tested it in. (RFC 5506 allows this,
but requires a SDP attribute for enabling it.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e96406eda4f143f101bd44372f7b2d542183000a':
rtsp: Add support for depacketizing RTP data via custom IO
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f95f0dda55fca74b646937095a02a8fa9776622':
rtpdec: Move the URLContext used for RTCP RR out from the context, to a parameter
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To use this, set sdpflags=custom_io to the sdp demuxer. During
the avformat_open_input call, the SDP is read from the AVFormatContext
AVIOContext (ctx->pb) - after the avformat_open_input call,
during the av_read_frame() calls, the same ctx->pb is used for reading
packets (and sending back RTCP RR packets).
Normally, one would use this with a read-only AVIOContext for the
SDP during the avformat_open_input call, then close that one and
replace it with a read-write one for the packets after the
avformat_open_input call has returned.
This allows using the RTP depacketizers as "pure" demuxers, without
having them tied to the libavformat network IO.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '90c784cc13f6bf21a8eb69f3b88b50c7a70f6c59':
rtpdec: Pass the sequence number to depacketizers
configure: Make avconv depend on null, anull and resample filters
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtpdec: Remove an outdated todo comment
rtpdec: Rename a static variable to normal naming conventions
sh4: dsputil: remove duplicate of ff_gmc_c()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This comment was added in e309128f, in 2002, and has been brought
along since then more or less unmodified.
The first point of the todo was implemented in dbf30963 in 2006,
the second one is not relevant to rtpdec.c (brought along from
rtp.c in 8eb793c4 in 2008) but would be more relevant to the
rtp muxer, although it isn't a good idea anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
dv1394: Swap the min and max values of the 'standard' option
rtpdec_vp8: Don't parse fields that aren't used
lavc: add some AVPacket doxy.
audiointerleave: deobfuscate a function call.
rtpdec: factorize identical code used in several handlers
a64: remove interleaved mode.
doc: Point to the new location of the c99-to-c89 tool
decode_audio3: initialize AVFrame
ws-snd1: set channel layout
wmavoice: set channel layout
wmapro: use AVCodecContext.channels instead of keeping a private copy
wma: do not keep private copies of some AVCodecContext fields
Conflicts:
libavcodec/wmadec.c
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Mainly clean up the RTP statistics code, plus a few other obviously
misindentend lines.
Remove some useless comments, de-doxygenize some comments,
add spacing around operators and fix a typo.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mingw/cygwin: Stop adding -fno-common to gcc CFLAGS
Restructure av_log_missing_feature message
rtp: Support packetization/depacketization of opus
file: Set the return value type for lseek to int64_t.
ppc: fix Altivec build with old compilers
build: add LTO support for PGI compiler
build: add -Mdse to PGI optimisation flags
rtpenc_vp8: Update the packetizer to the latest spec version
rtpdec_vp8: Make the depacketizer implement the latest spec draft
doc: allow building with old texi2html versions
avutil: skip old_pix_fmts.h since it is just a list
Conflicts:
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/ppc/fmtconvert_altivec.c
libavcodec/utils.c
libavformat/file.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
nutdec: const correctness for get_v_trace/get_s_trace function arguments
truemotion2: Request samples for old TM2 headers
rtpdec: Remove a useless ff_ prefix from a static symbol
rtpdec: Support depacketizing speex
rtpenc: Add support for packetizing speex
Conflicts:
libavformat/rtpdec.c
libavformat/sdp.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
RTPDynamicProtocolHandler for speex is added. Initial support for
speex depacketization from RTP stream comes with it.
Currently, only codec audio rate can be applied based on sdp:
* Narrowband ( 8K)
* Wideband (16K)
* Ultrawideband (32K)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: dsputil: Only compile motion_est code when encoders are enabled
mem: fix typo in check for __ICC
fate: mp3: drop redundant CMP setting
rtp: Depacketization of JPEG (RFC 2435)
Rename ff_put_string to avpriv_put_string
mjpeg: Rename some symbols to avpriv_* instead of ff_*
yadif: cosmetics
Conflicts:
Changelog
libavcodec/mjpegenc.c
libavcodec/x86/Makefile
libavfilter/vf_yadif.c
libavformat/version.h
libavutil/mem.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (35 commits)
h264_idct_10bit: port x86 assembly to cpuflags.
x86inc: clip num_args to 7 on x86-32.
x86inc: sync to latest version from x264.
fft: rename "z" to "zc" to prevent name collision.
wv: return meaningful error codes.
wv: return AVERROR_EOF on EOF, not EIO.
mp3dec: forward errors for av_get_packet().
mp3dec: remove a pointless local variable.
mp3dec: remove commented out cruft.
lavfi: bump minor to mark stabilizing the ABI.
FATE: add tests for yadif.
FATE: add a test for delogo video filter.
FATE: add a test for amix audio filter.
audiogen: allow specifying random seed as a commandline parameter.
vc1dec: Override invalid macroblock quantizer
vc1: avoid reading beyond the last line in vc1_draw_sprites()
vc1dec: check that coded slice positions and interlacing match.
vc1dec: Do not ignore ff_vc1_parse_frame_header_adv return value
configure: Move parts that should not be user-selectable to CONFIG_EXTRA
lavf: remove commented out cruft in avformat_find_stream_info()
...
Conflicts:
Makefile
configure
libavcodec/vc1dec.c
libavcodec/x86/h264_deblock.asm
libavcodec/x86/h264_deblock_10bit.asm
libavcodec/x86/h264dsp_mmx.c
libavfilter/version.h
libavformat/mp3dec.c
libavformat/utils.c
libavformat/wv.c
libavutil/x86/x86inc.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtsp: Don't use av_malloc(0) if there are no streams
rtsp: Don't use uninitialized data if there are no streams
vaapi: mpeg2: fix slice_vertical_position calculation.
hwaccel: mpeg2: decode first field, if requested.
cosmetics: Fix indentation
rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
tiertexseq: set correct block_align for audio
tiertexseq: set audio stream start time to 0
voc/avs: Do not change the sample rate mid-stream.
segafilm: use the sample rate as the time base for audio streams
ea: fix audio pts
psx-str: fix audio pts
vqf: set packet duration
tta demuxer: set packet duration
mpegaudio_parser: do not ignore information from the first parsed frame
mpegaudio_parser: be less picky about the start position
thp: set audio packet durations
avcodec: add a Vorbis parser to get packet duration
vorbisdec: read the previous window flag for long windows
lavc: free the output packet when encoding failed or produced no output.
lavc: preserve avpkt->destruct in ff_alloc_packet().
lavc: clarify the meaning of AVCodecContext.frame_number.
mpegts: Pad the packet buffer in handle_packet().
mpegts: Do not call read_sl_header() when no bytes remain in the buffer.
Conflicts:
libavcodec/mpegaudio_parser.c
libavcodec/version.h
libavformat/mpegts.c
tests/ref/fate/pva-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
shorten: Use separate pointers for the allocated memory for decoded samples.
atrac3: Fix crash in tonal component decoding.
ws_snd1: Fix wrong samples counts.
movenc: Don't set a default sample duration when creating ismv
rtp: Factorize the check for distinguishing RTCP packets from RTP
golomb: avoid infinite loop on all-zero input (or end of buffer).
bethsoftvid: synchronize video timestamps with audio sample rate
bethsoftvid: add audio stream only after getting the first audio packet
bethsoftvid: Set video packet duration instead of accumulating pts.
bethsoftvid: set packet key frame flag for audio and I-frame video packets.
bethsoftvid: fix read_packet() return codes.
bethsoftvid: pass palette in side data instead of in a separate packet.
sdp: Ignore RTCP packets when autodetecting RTP streams
proresenc: initialise 'sign' variable
mpegaudio: replace memcpy by SIMD code
vc1: prevent using last_frame as a reference for I/P first frame.
Conflicts:
libavcodec/atrac3.c
libavcodec/golomb.h
libavcodec/shorten.c
libavcodec/ws-snd1.c
tests/ref/fate/bethsoft-vid
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
CDXL demuxer and decoder
hls: Re-add legacy applehttp name to preserve interface compatibility.
hlsproto: Rename the functions and context
hlsproto: Encourage users to try the hls demuxer instead of the proto
doc: Move the hls protocol section into the right place
libavformat: Rename the applehttp protocol to hls
hls: Rename the functions and context
libavformat: Rename the applehttp demuxer to hls
rtpdec: Support H263 in RFC 2190 format
rv30: check block type validity
ttadec: CRC checking
movenc: Support muxing VC1
avconv: Don't split out inline sequence headers when stream copying VC1
rv34: handle size changes during frame multithreading
rv40: prevent undefined signed overflow in rv40_loop_filter()
rv34: use AVERROR return values in ff_rv34_decode_frame()
rv34: use uint16_t for RV34DecContext.deblock_coefs
librtmp: Add "lib" prefix to librtmp URLProtocol declarations.
movenc: Use defines instead of hardcoded numbers for RTCP types
smjpegdec: implement seeking
...
Conflicts:
Changelog
doc/general.texi
libavcodec/avcodec.h
libavcodec/rv30.c
libavcodec/tta.c
libavcodec/version.h
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is different from the "modern" RTP payload formats for H263
as defined by RFC 4629, 2429 and 3555. According to the newer RFCs,
this old one is to be considered deprecated and only be used for
interoperating with legacy systems.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Conflicts:
Changelog
RELEASE
libavcodec/mpegaudiodec.c
libavcodec/pthread.c
libavformat/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a322, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
This requires using a separate init function, since there
isn't necessarily any fmtp lines for this codec, so
parse_sdp_a_line won't be called. Incorporating it with the
alloc function wouldn't do either, since it is called before
the full rtpmap line is parsed (where the sample rate is
extracted).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (22 commits)
configure: add check for w32threads to enable it automatically
rtmp: do not hardcode invoke numbers
cinepack: return non-generic errors
fate-lavf-ts: use -mpegts_transport_stream_id option.
Add an APIchanges entry and a minor bump for avio changes.
avio: Mark the old interrupt callback mechanism as deprecated
avplay: Set the new interrupt callback
avconv: Set new interrupt callbacks for all AVFormatContexts, use avio_open2() everywhere
cinepak: remove redundant coordinate checks
cinepak: check strip_size
cinepak, simplify, use AV_RB24()
cinepak: simplify, use FFMIN()
cinepak: Fix division by zero, ask for sample if encoded_buf_size is 0
applehttp: Fix seeking in streams not starting at DTS=0
http: Don't use the normal http proxy mechanism for https
tls: Handle connection via a http proxy
http: Reorder two code blocks
http: Add a new protocol for opening connections via http proxies
http: Split out the non-chunked buffer reading part from http_read
segafilm: add support for raw videos
...
Conflicts:
avconv.c
configure
doc/APIchanges
libavcodec/cinepak.c
libavformat/applehttp.c
libavformat/version.h
tests/lavf-regression.sh
tests/ref/lavf/ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
RTCP timestamps are only necessary to synchronize time between
multiple streams. For a single stream, the RTP packet timestamp
provides more reliable timing. As a result, single-stream RTP
sessions should now have accurate and monotonic PTS.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
vble: remove vble_error_close
VBLE Decoder
tta: use an integer instead of a pointer to iterate output samples
shorten: do not modify samples pointer when interleaving
mpc7: only support stereo input.
dpcm: do not try to decode empty packets
dpcm: remove unneeded buf_size==0 check.
twinvq: add SSE/AVX optimized sum/difference stereo interleaving
vqf/twinvq: pass vqf COMM chunk info in extradata
vqf: do not set bits_per_coded_sample for TwinVQ.
twinvq: check for allocation failure in init_mdct_win()
swscale: add padding to conversion buffer.
rtpdec: Simplify finalize_packet
http: Handle proxy authentication
http: Print an error message for Authorization Required, too
AVOptions: don't return an invalid option when option list is empty
AIFF: add 'twos' FourCC for the mux/demuxer (big endian PCM audio)
Conflicts:
libavcodec/avcodec.h
libavcodec/tta.c
libavcodec/vble.c
libavcodec/version.h
libavutil/opt.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
All current usages of it are incompatible with localization.
For example strcasecmp("i", "I") != 0 is possible, but would
break many of the places where it is used.
Instead use our own implementations that always treat the data
as ASCII.
Signed-off-by: Martin Storsjö <martin@martin.st>
All current usages of it are incompatible with localization.
For example strcasecmp("i", "I") != 0 is possible, but would
break many of the places where it is used.
Instead use our own implementations that always treat the data
as ASCII.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Previous code could read 4 bytes past the end of the buffer on a RTCP_SR
packet or offset a pointer by an unchecked external value (payload_len),
though neither will reliably cause a crash or other misbehavior beyond
garbage timestamps.
Additionally, unknown RTCP packet types, even in compounded packets, are
now ignored as per RFC 3550 section 6.1, page 22, though currently this
only has any practical effect if a sender puts an unrecognized type
before RTCP_BYE in a compounded packet, or (incorrectly) does not put
RTCP_SR first.
Signed-off-by: John Brooks <john.brooks@bluecherry.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows skipping past unsupported RTCP packet types, as
RFC 3550 section 6.1 mandates.
Currently this only has any practical effect if a sender puts
an unrecognized type before RTCP_BYE in a compounded packet, or
(incorrectly) does not put RTCP_SR first.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
dnxhddec: optimise dnxhd_decode_dct_block()
rtp: remove disabled code
eac3enc: use different numbers of blocks per frame to allow higher bitrates
dnxhd: add regression test for 10-bit
dnxhd: 10-bit support
dsputil: update per-arch init funcs for non-h264 high bit depth
dsputil: template get_pixels() for different bit depths
dsputil: create 16/32-bit dctcoef versions of some functions
jfdctint: add 10-bit version
mov: add clcp type track as Subtitle stream.
mpeg4: add Mpeg4 Profiles names.
mpeg4: decode Level Profile for MPEG4 Part 2.
ffprobe: display bitstream level.
imgconvert: remove unused glue and xglue macros
Conflicts:
libavcodec/dsputil_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (40 commits)
H.264: template left MB handling
H.264: faster fill_decode_caches
H.264: faster write_back_*
H.264: faster fill_filter_caches
H.264: make filter_mb_fast support the case of unavailable top mb
Do not include log.h in avutil.h
Do not include pixfmt.h in avutil.h
Do not include rational.h in avutil.h
Do not include mathematics.h in avutil.h
Do not include intfloat_readwrite.h in avutil.h
Remove return statements following infinite loops without break
RTSP: Doxygen comment cleanup
doxygen: Escape '\' in Doxygen documentation.
md5: cosmetics
md5: use AV_WL32 to write result
md5: add fate test
md5: include correct headers
md5: fix test program
doxygen: Drop array size declarations from Doxygen parameter names.
doxygen: Fix parameter names to match the function prototypes.
...
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/flvenc.c
libavformat/oggenc.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
build: simplify commands for clean target
swscale: split swscale.c in unscaled and generic conversion routines.
swscale: cosmetics.
swscale: integrate (literally) swscale_template.c in swscale.c.
swscale: split out x86/swscale_template.c from swscale.c.
swscale: enable hScale_altivec_real.
swscale: split out ppc _template.c files from main swscale.c.
swscale: remove indirections in ppc/swscale_template.c.
swscale: split out unscaled altivec YUV converters in their own file.
mpegvideoenc: fix multislice fate tests with threading disabled.
mpegts: Wrap #ifdef DEBUG and av_hex_dump_log() combination in a macro.
build: Simplify texi2html invocation through the --output option.
Mark some variables with av_unused
Replace avcodec_get_pix_fmt_name() by av_get_pix_fmt_name().
svq3: Check negative mb_type to fix potential crash.
svq3: Move svq3-specific fields to their own context.
rawdec: initialize return value to 0.
Remove unused get_psnr() prototype
rawdec: don't leak option strings.
bktr: get default framerate from video standard.
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Most of these variables are only used in av_dlog statements, some
are required but not used by other macros.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (33 commits)
rtpdec_qdm2: Don't try to parse data packet if no configuration is received
ac3enc: put the counting of stereo rematrixing bits in the same place to make the code easier to understand.
ac3enc: clean up count_frame_bits() and count_frame_bits_fixed()
mpegvideo: make FF_DEBUG_DCT_COEFF output coeffs via av_log() instead of just via AVFrame.
srtdec: make sure we don't write past the end of buffer
wmaenc: improve channel count and bitrate error handling in encode_init()
matroskaenc: make sure we don't produce invalid file with no codec ID
matroskadec: check that pointers were initialized before accessing them
lavf: fix function name in compute_pkt_fields2 av_dlog message
lavf: fix av_find_best_stream when providing a wanted stream.
lavf: fix av_find_best_stream when decoder_ret is given and using a related stream.
ffmpeg: factorize quality calculation
tiff: add support for SamplesPerPixel tag in tiff_decode_tag()
tiff: Prefer enum TiffCompr over int for TiffContext.compr.
mov: Support edit list atom version 1.
configure: Enable libpostproc automatically if GPL code is enabled.
Cosmetics: fix prototypes in oggdec
oggdec: fix memleak with continuous streams.
matroskaenc: add missing new line in av_log() call
dnxhdenc: add AVClass in private context.
...
swscale changes largely rewritten by me or replaced by baptsites due to lots of bugs in ronalds code.
Above code is also just in case its not obvios to a large extended duplicates that where cherry picked
from ffmpeg.
Conflicts:
configure
ffmpeg.c
libavformat/matroskaenc.c
libavutil/pixfmt.h
libswscale/ppc/swscale_template.c
libswscale/swscale.c
libswscale/swscale_template.c
libswscale/utils.c
libswscale/x86/swscale_template.c
tests/fate/h264.mak
tests/ref/lavfi/pixdesc_le
tests/ref/lavfi/pixfmts_copy_le
tests/ref/lavfi/pixfmts_null_le
tests/ref/lavfi/pixfmts_scale_le
tests/ref/lavfi/pixfmts_vflip_le
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Adding _POSIX_C_SOURCE to CPPFLAGS globally produces all sorts of problems
since it causes certain system functions to be hidden on some (BSD) systems.
The solution is to only add the flag on systems that really require it, i.e.
glibc-based ones.
This change makes BSD systems compile out-of-the-box without the need for
adding specific flags manually. It also allows dropping a number of flags
set manually on a file-per-file basis, but were only present to work around
breakage introduced by the presence of _POSIX_C_SOURCE.
Also add _XOPEN_SOURCE to CPPFLAGS for glibc systems. We use XSI extensions
in several places already, so it is preferable to define it globally instead
of littering source files with individual #defines only needed for glibc.
* qatar/master: (22 commits)
ac3enc: move extract_exponents inner loop to ac3dsp
avio: deprecate url_get_filename().
avio: deprecate url_max_packet_size().
avio: make url_get_file_handle() internal.
avio: make url_filesize() internal.
avio: make url_close() internal.
avio: make url_seek() internal.
avio: cosmetics, move AVSEEK_SIZE/FORCE declarations together
avio: make url_write() internal.
avio: make url_read_complete() internal.
avio: make url_read() internal.
avio: make url_open() internal.
avio: make url_connect internal.
avio: make url_alloc internal.
applehttp: Merge two for loops
applehttp: Restructure the demuxer to use a custom AVIOContext
applehttp: Move finished and target_duration to the variant struct
aacenc: reduce the number of loop index variables
avio: deprecate url_open_protocol
avio: deprecate url_poll and URLPollEntry
...
Conflicts:
libavformat/applehttp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fix partial run when no samples path is specified
ARM: NEON fixed-point forward MDCT
ARM: NEON fixed-point FFT
lavf: bump minor version and add an APIChanges entry for avio changes
avio: simplify url_open_dyn_buf_internal by using avio_alloc_context()
avio: make url_fdopen internal.
avio: make url_open_dyn_packet_buf internal.
avio: avio_ prefix for url_close_dyn_buf
avio: avio_ prefix for url_open_dyn_buf
avio: introduce an AVIOContext.seekable field
ac3enc: use generic fixed-point mdct
lavfi: add fade filter
Change yadif to not use out of picture lines.
lavc: deprecate AVCodecContext.antialias_algo
lavc: mark mb_qmin/mb_qmax for removal on next major bump.
Conflicts:
doc/filters.texi
libavcodec/ac3enc_fixed.h
libavcodec/ac3enc_float.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/vf_fade.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It doesn't look fit to be a part of the public API.
Adding a temporary hack to ffserver to be able to use it, should be
cleaned up when somebody is up for it.
In the name of consistency:
put_byte -> avio_w8
put_<type> -> avio_w<type>
put_buffer -> avio_write
put_nbyte will be made private
put_tag will be merged with avio_put_str
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
