This fixes an invalid read if end is 0:
band_end = ff_ac3_bin_to_band_tab[end-1] + 1;
Depending on what is before the array, this can cause stack smashing,
when band_end becomes too large.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If band->thr is 0.0f, the division is undefined, making norm_fac not a
number or infinity, which causes psy_band->threshold to become NaN.
This is passed on to other variables until it finally reaches
sce->sf_idx and is converted to an integer (-2147483648).
This causes a segmentation fault when it is used as array index.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ac may be NULL and then accessing ac->avctx results in a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes segmentation faults, when pic->linesize[0] is negative.
In that case 'line * pic->linesize[0] + pixel_ptr' is treated as
unsigned and wraps around.
This reverts commit 7d78a964.
The problem was introduced in commit f7e1367f, which should obsolete
that commit.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The spec madandate both time_scale and num_units_in_tick greater than 0,
however since they are not essential for decoding, just ignore the whole
block and try to finish parsing the VUI.
Related to Ticket4445.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This commit implements the perceptual noise substitution AAC extension. This is a proof of concept
implementation, and as such, is not enabled by default. This is the fourth revision of this patch,
made after some problems were noted out. Any changes made since the previous revisions have been indicated.
In order to extend the encoder to use an additional codebook, the array holding each codebook has been
modified with two additional entries - 13 for the NOISE_BT codebook and 12 which has a placeholder function.
The cost system was modified to skip the 12th entry using an array to map the input and outputs it has. It
also does not accept using the 13th codebook for any band which is not marked as containing noise, thereby
restricting its ability to arbitrarily choose it for bands. The use of arrays allows the system to be easily
extended to allow for intensity stereo encoding, which uses additional codebooks.
The 12th entry in the codebook function array points to a function which stops the execution of the program
by calling an assert with an always 'false' argument. It was pointed out in an email discussion with
Claudio Freire that having a 'NULL' entry can result in unexpected behaviour and could be used as
a security hole. There is no danger of this function being called during encoding due to the codebook maps introduced.
Another change from version 1 of the patch is the addition of an argument to the encoder, '-aac_pns' to
enable and disable the PNS. This currently defaults to disable the PNS, as it is experimental.
The switch will be removed in the future, when the algorithm to select noise bands has been improved.
The current algorithm simply compares the energy to the threshold (multiplied by a constant) to determine
noise, however the FFPsyBand structure contains other useful figures to determine which bands carry noise more accurately.
Some of the sample files provided triggered an assertion when the parameter to tune the threshold was set to
a value of '2.2'. Claudio Freire reported the problem's source could be in the range of the scalefactor
indices for noise and advised to measure the minimal index and clip anything above the maximum allowed
value. This has been implemented and all the files which used to trigger the asserion now encode without error.
The third revision of the problem also removes unneded variabes and comparisons. All of them were
redundant and were of little use for when the PNS implementation would be extended.
The fourth revision moved the clipping of the noise scalefactors outside the second loop of the two-loop
algorithm in order to prevent their redundant calculations. Also, freq_mult has been changed to a float
variable due to the fact that rounding errors can prove to be a problem at low frequencies.
Considerations were taken whether the entire expression could be evaluated inside the expression
, but in the end it was decided that it would be for the best if just the type of the variable were
to change. Claudio Freire reported the two problems. There is no change of functionality
(except for low sampling frequencies) so the spectral demonstrations at the end of this commit's message were not updated.
Finally, the way energy values are converted to scalefactor indices has changed since the first commit,
as per the suggestion of Claudio Freire. This may still have some drawbacks, but unlike the first commit
it works without having redundant offsets and outputs what the decoder expects to have, in terms of the
ranges of the scalefactor indices.
Some spectral comparisons: https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/Original.png (original),
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/PNS_NO.png (encoded without PNS),
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/PNS1.2.png (encoded with PNS, const = 1.2),
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/Difference1.png (spectral difference).
The constant is the value which multiplies the threshold when it gets compared to the energy, larger
values means more noise will be substituded by PNS values. Example when const = 2.2:
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/PNS_2.2.png
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit replaces the previous hardcoded constants with both new and previously
defined macros from aac.h. This change makes it easy for anyone reading the code
to know how encoding and decoding scalefactors works. It's also possibly
a step in unifying some of the code across both the encoder and decoder.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
They seem to sometimes trigger with old AVI files. They are just
confusing, do not help anyone, and use sloppy language.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This is optional, but ensures that linking with -Wl,--as-needed does not
drop the library containing the MMAL VC driver. The driver normally
"registers" itself in the library constructor, but since no symbols are
explicitly referenced, the linker could remove it with --as-needed
enabled.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This commit adjusts the intial offset for PNS values, introduced
with commit f7f71b5795 earlier. This
commit shifts the value in such a way that no further offsets are
required in the aaccoder.c file. Earlier version of the PNS patch had 2 offsets in both the aaccoder and aacenc.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
YCgCo decoding works just fine. It depends on the API user what is done
with the output. Some API users might support it, some not. Some users
might support it under certain circumstances only.
It is not the job of the decoder to print this message. If the API user
supports it, this message is extremely unhelpful.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit implements support for writing the noise energy values used in PNS.
The difference between regular scalefactors and noise energy values is that the latter
require a small preamble (NOISE_PRE + energy_value_diff) to be written as the first
noise-containing band. Any following noise energy values use the previous one to
base their "diff" on. Ordinary scalefactors remain unchanged other than that they ignore the noise values.
This commit should not change anything by itself, the following commits will bring it in use.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5637ff01218a44fcc1fff9b4382a15a6470abcc9':
libavcodec: Clarify the documentation of the internal codec capability flags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bd737b5178f361a9b592691848f29a7a79603a7e':
h264: reset the private data in init_thread_copy()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '65afa65e7393e7745427e267d6c6ca814c7c8b45':
h264: drop redundant initialization of the scaling matrices
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e1f907711a91e5ce19402a1831cfbe8f709b67f7':
h264: factor out common code from init() and init_thread_copy()
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '43fd3dd80ca2d1c2ccf6a7b7632db544c809c690':
h264: drop redundant initialization in init()
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They are no longer initialized in ff_h264_decode_init() since 43fd3dd,
so svq3 needs to initialize the manually.
Fixes svq3 decoding, broken since 43fd3dd.
* commit '84f226a3bcd8b39801a4c9051c033ab7d61aaf76':
h264: use the correct SPS during PPS parsing
Conflicts:
libavcodec/h264_ps.c
See: dc35b77b28
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The generic code copies the main context's private data to all the
others. However that is quite dangerous, as it might end up copying some
pointers that are or will become invalid.
Since everything we actually need will be copied later in
update_thread_context(), it's safest to zero the private data in
init_thread_copy(), so it works the same way as init for the main
context.
ER with slice threads is buggy and since the merge of the libav cleanup broken
as the ER context which is supposed to be per frame has been placed in
the slice context, so there are multiple per frame which does not work as is.
Theres no bug report about ER with frame threads. If someone knows of a
case where it crashes / fails without slice threads please mail me and
open a ticket on trac.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'df528b11ac607de13a7c438f2a51f2119f71a03c':
hevc: make sure no dangling pointers remain around on VPS/SPS change
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce0bc09ee2580d49fec90a6eb0de2ba1b580c854':
hevc: do not change the VPS if its contents are the same
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise it is shown even after the file was fixed with avidemux,
because the userdata string still ends with 'p'.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Additionally always set the software pixel format, so it's available
even if ff_get_format() is not called later. This will be useful for
exporting stream parameters from init().
Should fix compilation failures with strict compilers
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It was not possible to set a profile before, the builtin profile
parameter does not seem to work propperly.
To be compatible with libx264, this overlays it with a local parameter
that expects a string, instead of an int, that takes the well known values
"high", "main" or "baseline".
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4978850ca2cb1ec6908f5bc79cc592ca454d11e8':
build: Split JPEG-related tables off into a separate component
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6e3dcba0c6f11bd7022e2d3b9bcb7b6a09d6c80':
mjpeg: Move code only used in the encoder(s) to the appropriate header
Conflicts:
libavcodec/mjpegdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '23944d29a22a2cd602753b3705f73011c3bf0b18':
indeo: Give Indeo4/5 shared code a more consistent name
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7d3183d3a4e800ab7a7fa24f49968a1b1bcc0161':
qsv: Skip header compilation depending on what parts of qsv are enabled
Conflicts:
libavcodec/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavc/h264_refs: Fix compilation with -DTRACE.
Fix make checkheaders if libmfx is not available.
lavf/gif: Add an option max_gif_delay to limit the frame duration.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ba27c2348d26000257e891e40a72facb0d916be':
qsvdec: add 'decode' to the non-static function names
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd0a63d8b989647ffdb5f40da8e1feaffe1a8e791':
qsvdec: split off some code that will be shared with the encoder
Conflicts:
libavcodec/Makefile
libavcodec/qsvdec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Sufficiently new nvenc hardware (GM20x or later) has support for H.265
encoding. This works the same as the H.264 encoder except the
codec parameters are different.
Due to the fact that common codec parameters are not shareable, there's
quite a bit of conditional logic you'd wish we could do without, but
such is life.
Signed-off-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Fixes out of array access
Fixes: da14e86d8462be6493eab16bc2d40f88/asan_heap-oob_204cfd2_528_cov_340150052_COMPRESS.BMP
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b21af32aed7e343f962753943e9f16baedfb1750':
lavc: Prefer x264 over openh264 if both libraries are available
See: ddae03f69b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
7966 -> 7897 decicycles
This basically switches to the implementation from f6f7d15041
which seems faster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously they where only updated when decoding started and would thus have
been inconsistent for a longer period of time leaving more chances for
problems
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a12d3188cbec15e22070e139fa5cc541da07e2c3':
h264: use a smaller struct for the ref lists
Conflicts:
libavcodec/h264_direct.c
libavcodec/h264_mb.c
libavcodec/h264_picture.c
libavcodec/h264_refs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2b4c38d3c647f409080606ef02b3363ada00be2c':
h264: drop some mpegvideo remnants from draw_horiz_band()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bf3c0fa49afd5bbf43aa841ff78007d72c80736':
h264: drop the now unused per-slice H264Contexts
Conflicts:
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '51d8725a6e4c7f989d6f0f38b59cb54a2d72846c':
h264: use the main H264Context as the parent for all slice contexts
Conflicts:
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '92e0b7342c0490894cbcea4461380321e0569de2':
h264_slice: constify all the uses of H264Context during slice decoding
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '582683b6ac798ed2a004a4e2121b7bd47892bbfd':
h264: move remaining ER stuff into the per-slice context
Conflicts:
libavcodec/h264.h
libavcodec/h264_picture.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bc69f38c1af71fbcbfb4b5efa77d0aeb5424c04':
error_resilience: do not require mbintra/skip tables
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '36d04801ba9d8622c2d759c172aea18561bac74d':
h264: move the scratch buffers into the per-slice context
Conflicts:
libavcodec/h264.h
libavcodec/h264_slice.c
libavcodec/svq3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '34d4c605e9a5116d5289b35633ade5b01cacab24':
h264_loopfilter: constify all uses of H264Context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c4b98de4d101ea715ef86847306a510afd0db0c':
h264.c: constify all uses of H264Context in slice and lower-level functions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f42485dbce614b3f63182845da43db690b427b7c':
h264: use a separate GetBitContext for slice data
Conflicts:
libavcodec/h264.c
libavcodec/h264_cavlc.c
libavcodec/h264_parser.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2ea00e35e4e0b58f7a306dd55d8f72a21c32c946':
h264: do not abuse the context as a temporary storage in get_last_needed_nal()
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '404a416d4b1fcbf9db5569481d8181f296c01ea9':
h264: remove some remnants of data partitioning
Conflicts:
libavcodec/h264.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9b201cacf85d710b102010cb4baef97f00ea39b':
h264: move cabac_init_idc into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6c90ce94f1b07f50cea2babf7471af455cca0ff':
h264: move loopfilter parameters into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bd3e460b73dd54a68dc253e010c239cefc8d8d55':
h264: move direct_cache into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c8280c3075dd54f26752c3a1185647578421703':
h264: move last_qscale_diff into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e7226984ac13aacb84eae77a372df8ff7685848f':
h264: move [{top,left}_]cbp into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7747726667c86877feed30c9e18460cb8e63f551':
h264: move map_col_to_list0[_field] into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ee0d774dfa94655e44707ff3e02f4a4d282c1963':
h264: move dist_scale_factor[_field] into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be69f0a800903b7573b18d9287d18b2f368b8b11':
h264: move col_{parity,fieldoff} into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '56febc993b928ccc039a32158ca60b234c311875':
h264: move the slice type variables into the per-slice context
Conflicts:
libavcodec/h264.c
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '99a35d1ccbb6b6cd260ce5c8369a897a79fe6a3a':
h264: move neighbor_transform_size into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8b00f4df20f4a8ab0656fdaf7d00233a6515a052':
h264: move some neighbour information into the per-slice context
Conflicts:
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4bd5ac200d15b4f458a50f66006549825f9fc865':
h264: move {chroma,intra16x16}_pred_mode into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5355ed6b20e941430c4f8fb82644e87a65366d61':
h264: move {prev,next}_mb_skipped into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd231e84b06a9964c840cff4e228509f706165fb6':
h264: move the quantizers into the per-slice context
Conflicts:
libavcodec/dxva2_h264.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd40ae0e595fe90b5583b9269f8bb000402bde5a6':
h264: do not copy qscale when updating per-thread contexts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also change the method for allocating them. Instead of two possible
alloc calls from different places, just ensure they are allocated at the
start of each slice. This should be simpler and less bug-prone than the
previous method.
