Extrapolate audio timestamps based on the number of samples demuxed.
Deal with some MXF nastiness involving fractional number of
samples per EditUnit when seeking (the specs handwave this away).
Further fixes from Tomas Härdin.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.
Also sets slices to 1 for the Ut Video encoder tests to keep them
green.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The old one didn't use segmentation. One uses segmentation in all frame
types (--aq-mode=1), and the other uses all segmentation features, but
only in inter frames (mbgraph).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This disables backward probability updates, which makes the codec more
friendly for frame-level multi-threading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The original test without a forced idct is still useful since it tests
the switching of the idct algorithm/permutation on x86 with MMX. MMXext
or SSE2. Make sure the test runs only if MMX inline asm is available and
force -cpuflags to all.
Add the required bitexact flag for both tests.
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
The RGB32 pixel format is RGBA/BGRA depending on target
endianness - make sure to convert it to one specific format for
the framecrc tests.
This fixes the pngparser fate test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
The encoder uses almost none of the mpegvideo infrastructure, only some
fields from MpegEncContext.
The FATE results change because now an all-zero quant matrix is written
into the file. Since it is not used for anything for ljpeg, this should
not be a problem.
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes sync in some samples (e.g. bugs 7581 and 8374 in VLC).
Based on a commit by Matthieu Bouron <matthieu.bouron@gmail.com>
Reported-by: Jean-Baptiste Kempf <jb@videolan.org>
CC: libav-stable@libav.org
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Update the fate reference since the last broken frame is not decoded
anymore.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.
Signed-off-by: Martin Storsjö <martin@martin.st>
If building out of tree, make sure the filter scripts are copied
into the build tree before running tests. This makes sure that
SRC_PATH doesn't need to exist on the remote system (or doesn't
need to exist at the same path).
Signed-off-by: Martin Storsjö <martin@martin.st>
If the "build_only" variable is set in the configuration file, the
FATE client will skip running tests and just compile all targets.
Signed-off-by: Martin Storsjö <martin@martin.st>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup.
This should also fix I/BI field pictures.
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs.
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes -t sample-accurate for audio and will allow further
simplication in the future.
Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
The function requires increasing the fuzz factor for the ac3/eac3 encode
tests and even so makes fate fail. It only provides a slight encoding
speedup for legacy CPUs that do not support SS2. Thus its benefit is not
worth the trouble it creates and fixing it would be a waste of time.
Most formats do not support negative timestamps, shift them to avoid
unexpected behaviour and a number of bad crashes.
CC:libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The sample is already included in the FATE suite, but is not tested
because cropping wasn't fully supported before.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The current code can fail to return the last frame if it contains
exactly the requested number of samples.
Fixes the join filter test, which previously did not include the last
408 samples in most cases.
CC:libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The gcov/lcov are a common toolchain for visualizing code coverage with
the GNU/Toolchain. The documentation and implementation of this
integration was heavily inspired from the blog entry by Mike Melanson:
http://multimedia.cx/eggs/using-lcov-with-ffmpeg/
These could be used for reference counting, or for keeping track of
decoding progress in references in multithreaded decoders.
Support is provided by gcc/msvc/suncc intrinsics, with a fallback using
pthread mutexes.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This reverts parts of d6d5ef5534, that didn't work right. (The
tests that were added failed on big endian, and the output looked
garbled on little endian as well.)
This is due to the fact that the intermediate scaling values (from
e.g. hScale8To19_c or hScale16To19_c) are stored as int32_t and
thus requires a separate output function, while yuv2gbrp_full_X_c
only interprets it as int16_t.
Signed-off-by: Martin Storsjö <martin@martin.st>
The FATE sample contains some pixels with value 0, but the palette
stored in the file contains only values from 16 up. Because the default
and cmdutils get_buffer() initialize the data to 0x80, they appear as
gray dots.
After this commit they change to black dots, which is probably still
incorrect but less visible and doesn't rely on get_buffer() initializing
the data.
This allows us to remove FF_IDCT_WMV2, which serves no practical purpose
other than to be able to select the WMV2 IDCT for MPEG (or vice versa)
and get corrupt output.
Fate tests for all wmv2-related tests change, because (for some obscure
reason) they forced use of the MPEG IDCT. You would get the same changes
previously by not using -idct simple in the fate test (or replacing it
with -idct auto).
Add some additional checks for EOF and print error messages on an incomplete
header or packet.
FATE reference updated for id-cin-video due to the demuxer no longer
returning a partial video packet at EOF.
Do not overwrite linesize set by get_buffer().
The last frame in the FATE test is not decoded anymore, since the file
is cut and a part of it is missing.
