This makes sure that segments actually start at a keyframe (and
makes sure we don't split segments twice in a row, with one segment
consisting of only a handful of packets), when one stream uses b-frames
while another one doesn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
In current versions of ffmpeg, when streaming to an RTMP server, anytime a packet of type
RTMP_PT_NOTIFY is encountered, the packet is prepended with @setDataFrame before it gets sent
to the server. This is incorrect; only packets for onMetaData and |RtmpSampleAccess should
invoke @setDataFrame on the RTMP server. Specifically, the current bug manifests
itself when trying to stream onTextData or onCuePoint invocations.
This fix addresses that problem and ensures that the @setDataFrame is only prepended
for onMetaData and |RtmpSampleAccess.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f856d9c2f314c493c672dfb9c876da182525da3d':
dashenc: Don't require the stream bitrate to be known
Conflicts:
libavformat/dashenc.c
See: 5f8fcdd448
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Don't write any bitrate attribute if it isn't known. As long as one
doesn't want automatic bitrate switching, playback can work just
fine even if it isn't set.
If strict standard compliance is requested, this is still considered
an error, since the attribute is mandatory according to the spec.
Based on a patch by Rodger Combs.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'fd9badd3cb3b60f5c54dcea35523e1ecca2f67a6':
xwma: Do not leak on failure path
Conflicts:
libavformat/xwma.c
See: 375a0c03a9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7fd10f66b722eccc2ada9128766d002f6d751f79':
hdsenc: Clear the previous codec tag when setting up the chained muxer
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f918b8a2933a65020cbe490ec637d5485c11a692':
hdsenc: Use the right filename in an error message
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The chained flv muxer wants one set of tags - normally this set
could be signaled via the AVOutputFormat codec_tag field (as
smoothstreamingenc and dashenc do). hdsenc doesn't signal it, since
the FLV codec tag arrays aren't exported from flvenc.c. This can
lead to the caller keeping an original codec tag from the originating
container here, which would then be a mismatch for the FLV muxer.
Since we don't really care about what codec tag the caller might
have set, just clear it and let the lavf muxer layer set the right
one for the chained FLV muxer later instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
If a stream's bitrate is not set, this attempts to use its rc_max_rate;
if neither is set, it avoids writing a bandwidth attribute at all.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Regression since 745730c9c2.
The dynamic buffer was not being used or freed.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '9257692ac15eff7b07540c1f61cebde0d8823fbd':
lavf: Only initialize s->offset once when using avoid_negative_ts make_zero
Conflicts:
libavformat/mux.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '40ed1cbf147d09fc0894bee160f0b6b6d9159fc5':
movenc: Allow writing a DASH sidx atom at the start of files
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3847f3ab58b3b74604807394247bf68827258103':
movenc: Add tfra entries for all tracks in a moof
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When given a stream starting at dts=0, it would previously consider
s->offset as uninitialized and set an offset when the second packet
was written, ending up writing two packets with dts=0. By initializing
this field to AV_NOPTS_VALUE, we make sure that we only initialize it
once, on the first packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2ded57371abead879bcee56da5131e5fac0d17ef':
movenc: Add support for writing sidx atoms for DASH segments
Conflicts:
Changelog
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d9d6afb8d2f284f5e620ecc19f643d5cd3facb8':
movenc: Factorize adding fragment info into a separate function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f9eb9165bb7d7982fdedf64f6bcec856f1bedd6':
movenc: Include empty tracks in iods when writing fragmented mp4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously only tfra entries were added for the first track in each moof.
The frag_info array used for tfra can also be used for writing
other kinds of fragment indexes, where it's more important to
include all tracks.
When the separate_moof option is enabled (as in ismv), we write
a separate moof for each track, so this doesn't make any difference
in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly to serve as a reference example on how to segment
the output from the mp4 muxer, capable of writing the segment
list in four different ways:
- SegmentTemplate with SegmentTimeline
- SegmentTemplate with implicit segments
- SegmentList with individual files
- SegmentList with one single file per track, and byte ranges
The muxer is able to serve live content (with optional windowing)
or create a static segmented MPD.
In advanced cases, users will probably want to do the segmenting
in their own application code.
Signed-off-by: Martin Storsjö <martin@martin.st>
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented streams with an empty initial moov,
we won't have any samples in any tracks when writing the
moov atom, thus trust that any tracks that are added actually
will be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c64f3615118d757dcf76040fe5407bf2b3883206':
flvenc: Send new metadata when FLAG_METADATA_UPDATED is set.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d0cd5f58c892276716f46f4b2702915e5018215':
flvenc: move metadata updates into a single function
Conflicts:
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is a generic solution that will not reqiore modifications when new options are added.
This also fixes problem with current implementation when qmin or qmax=-1.
Only 8 bits was sent and read back as 255.
Fixes#1275Fixes#1461
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
In http_open_cnx, the patch restores the AVDictionary if connection needs to be re-tried
because of a authentication/redirect status code.
Previously, if a 401/407/30x status code was encountered, http_open_cnx would restart at the redo label, but any options
used by the underlying protocol would be missing because they were removed by the first attempt.
Signed-off-by: Brandon Lees <brandon@n-hega.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3a6bb9735053c453f806ceab1d91124648d90aca':
Icecast: Send 100-continue header if possible
See: 17dc39e76b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is needed because Icecast since version 2.4.1 doesn't default
to audio/mpeg anymore. AVOption default not used here, since a later
check if -content_type is set is performed and would break.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This allows for proper error reporting. Only do
this for non-legacy requests as only Icecast >2.4.0
will reply with a proper status.
Libav seems to accept both, 100 and 200 status codes, but
let's stay close to spec.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the DASH spec, Representation IDs should be unique
across all adaptation sets. Fixing that and updating the fate
reference file to reflect this change.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using 100-continue ffmpeg will only send data if the server confirms it,
so if there is an error with auth or mounpoint, this allows that it is
properly reported to the user. Else ffmpeg sends data and just quits at
some point without an error message.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
use a default (audio/mpeg for historical reason) if none. Required since Icecast 2.4.1
Not using AVOption default because this breaks content-type warnings (needs to
detect if no type was set by the user)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows selecting if the demuxer should consider all streams to be
found after the first PMT and add further streams during decoding or if it rather
should scan all that are within the analyze-duration and other limits
Fixes Ticket3762
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8cb7b7b461b52898765b38e3eff68c0ce88347f3':
movenc: Avoid leaking locally allocated data when returning on errors
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids a potential crash if writing a fragmented psp mp4
(which probably is only a hypothetical scenario).
Signed-off-by: Martin Storsjö <martin@martin.st>
In matroska_read_seek(), |tracks| is assigned at the begining of the function.
However, functions like matroska_parse_cues() could reallocate the tracks so
that |tracks| can get invalidated.
This CL assigns |tracks| only before we use it so that it won't be invalidated.
BUG=427266
TEST=Test case in associated bug passes now.
Change-Id: I9c7065fe8f4311ca846076281df2282d190ed344
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1d8a0c1b43e58332a3a15c67d4adc161713cade8':
movenc: Allow to request not to use edit lists
Conflicts:
libavformat/movenc.c
See: 537ef8bebf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '897d5c3a4296f3da80b8699d1487328ca2de8e55':
lavf: Print a warning if failed to avoid negative timestamps when requested
Conflicts:
libavformat/mux.c
See: ec6a5fc6cc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously we wrote decoding timestamps here, while the specs
say it should be presentation timestamps.
Signed-off-by: Martin Storsjö <martin@martin.st>
When using the new first_trun flag instead of checking the track id,
we don't need to have a special case for the separate_moof flag
any longer.
This simplifies the complicated codepath ever so slightly.
Signed-off-by: Martin Storsjö <martin@martin.st>
In this case, shift tracks to start from zero instead (potentially
stretching the first sample in tracks that start later than the
first one).
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. This results in AV sync errors when
edit lists are used to adjust AV sync.
Some players, such as QuickTime, don't respect the duration for
audio packets, so if an audio track starts later than the video
track and the first audio sample gets a duration longer than the
actual amount of data in it, the result will be out of sync.
Based on patches by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is the same logic as is invoked on AVFMT_TS_NEGATIVE,
but which can be enabled manually, or can be enabled
in muxers which only need it in certain conditions.
Also allow using the same mechanism to force streams to start
at 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '56dc46a1893251e74be1ad63e54fb38d754bb1fe':
riffenc: do not fall back on AVCodecContext.frame_size for MP3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '91e8d2eb1f7bf3af949008b106ec1ca037b88b0e':
lavf: use the format context strict_std_compliance instead of the codec one
Conflicts:
libavformat/mux.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f3fadfbe3c6ad52fad5c614b6067c5401227959':
lavc,lavf: switch to the new vorbis parse API
Conflicts:
libavformat/oggparsevorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5e80fb7ff226f136dbcf3fed00a2966bf8e9bd70':
lavc: add a public API for parsing vorbis packets.
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/version.h
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6896f95b2483e52e717e2c75a4fd24fcb0e14b67':
vorbis_parser: add an AV prefix to VorbisParseContext
Conflicts:
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The only parameters needed by the demuxers are the sample rate and sample
count, which can be trivially extracted manually, without resorting to
an avpriv function.
It will not be set unless the codec context is used as the encoding
context, which is discouraged. For MP2, av_get_audio_frame_duration()
will already set the frame size properly. For MP3, set the frame size
explicitly.
It is never an error if this method failed. If rt->live was
explicitly set to 0 (known to be a recorded file), print it
as a warning, otherwise print it as a debug message.
Based on a patch by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
TDRL is what we used as a replacement of TYER, and, according to
http://id3.org/id3v2.4.0-changes :
TYER - Year
This frame is replaced by the TDRC frame, 'Recording time'
[F:4.2.5].
So change TDRL usages to TDRC.
Fixes ticket #3694
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way if we by chance run into a valid PMT we have a more complete
set of streams, also do not reset streams in case we run into a worse
PMT
Fixes Ticket4046
alternatively Ticket4046 could be closed as invalid or wontfix as it contains
some PMTs which lack the 2 subtitle streams
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f221b6a9365aa400061e16266f2d1242f7169f8':
movenc: Define the flag bits using shifts instead of as decimal numbers
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Avoid the creation of files which cannot be successfully decoded by
ffmpeg, for example generated with:
ffmpeg -f lavfi -i sine -af "aselect='not(between(t,100,500))',aresample=min_comp=0.001:min_hard_comp=0.100000" -acodec pcm_s16le -t 1000 -y out_audio.flv
* commit 'aae6b3b918b4133b8cc2d1631196c1d406d0351a':
movenc: Don't write any iso brands in ismv files
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c55d1d382cd41345a79782ace41f9b43f45dca9a':
movenc: Don't write any tfdt atom for ismv files
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '00c67fe1d0bc7c2ce49daac9c80ea39d5a663b73':
movenc: Write a 0 duration in mdhd and tkhd for an empty initial moov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
