* qatar/master:
lavc: always align height by 32 pixel
raw: add 10bit YUV definitions
nut: support 10bit YUV
mpegvideo_enc: separate declarations and statements
oma: make header compile standalone
vp3: Reorder some functions to fix VP3 build with Theora disabled.
build: fix standalone compilation of ADX encoder
build: fix standalone compilation of ADPCM decoders
build: fix standalone compilation of mpc7/mpc8 decoders
4xm: Use bytestream2 functions to prevent overreads
bytestream: add a new set of bytestream functions with overread checking
mpegts: Suppress invalid timebase warnings on DMB streams.
mpegts: Fix typo in handling sections in the PMT.
vc1dec: Use the right pointer type for the tmp pointer
Conflicts:
libavcodec/4xm.c
libavcodec/utils.c
libavcodec/vc1dec.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* tjoppen/proper_mxf_track_linking:
mxfdec: Don't parse slices or DeltaEntryArrays
mxfdec: Remove dead/useless code
mxfdec: Hybrid demuxing/seeking solution
mxfdec: Add mxf_edit_unit_absolute_offset()
mxfdec: Replace zero IndexDurations with st->duration
mxfdec: Add "fake" index to MXFIndexTable to assist seeking
mxfdec: Add MXFIndexTables
mxfdec: Move mxf_read_packet*() near the bottom of the file
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The sample has an incomplete last frame. Decoding it is pointless.
The garbage produced was changed by the bitstream reader now
protecting against over-reads.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we don't
use delta entries or slices, only StreamOffsets.
OPAtom seeking basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
This fixes ticket #746.
This changes mxf_compute_ptses() to be used for MXFIndexTable, and also adds
code for computing the fake index to it.
This also temporarily disables PTS computation. A future patch will restore it.
* qatar/master:
movenc: Rudimentary IODs support.
v410enc: fix output buffer size check
v410enc: include correct headers
fate: add -pix_fmt rgb48le to r210 test
flvenc: Support muxing 16 kHz nellymoser
configure: refactor list of programs into a variable
fate: add r210 decoder test
fate: split off Indeo FATE tests into their own file
fate: split off ATRAC FATE tests into their own file
fate: Add FATE tests for v410 encoder and decoder
ARM: fix external symbol refs in rv40 asm
westwood: Make sure audio header info is present when parsing audio packets
libgsm: Reset the MS mode of GSM in the flush function
libgsm: Set options on the right object
ARM: dca: disable optimised decode_blockcodes() for old gcc
Conflicts:
configure
libavformat/movenc.c
libavformat/movenc.h
tests/fate2.mak
tests/ref/acodec/alac
tests/ref/vsynth1/mpeg4
tests/ref/vsynth2/mpeg4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
applehttp: Properly clean up if unable to probe a segment
applehttp: Avoid reading uninitialized memory
fate: Replace misleading "aac" in the name of an ADTS test with "adts".
fate: Drop pointless "-an" from pictor test command.
fate: split off image codec FATE tests into their own file
fate: split off WMA codec FATE tests into their own file
fate: split off lossless video and audio FATE tests into their own files
fate: split off qtrle codec FATE tests into their own file
fate: split off Ut Video codec FATE tests into their own file
fate: split off screen codec FATE tests into their own file
fate: split off Real Inc. codec FATE tests into their own file
fate: split off AC-3 codec FATE tests into their own file
mpegvideo: remove abort() in ff_find_unused_picture()
rv40: NEON optimised loop filter strength selection
rv40: rearrange loop filter functions
configure: cosmetics: sort some lists where appropriate
swscale_mmx: drop no longer required parameters from VSCALEX macros
swscale: Mark yuv2planeX_8_mmx as MMX2; it contains MMX2 instructions.
build: conditionally compile x86 H.264 chroma optimizations
v410 encoder and decoder
...
Conflicts:
Changelog
configure
doc/developer.texi
doc/general.texi
libavcodec/arm/asm.S
libavcodec/avcodec.h
libavcodec/v410dec.c
libavcodec/v410enc.c
libavcodec/version.h
libavcodec/x86/Makefile
libavcodec/x86/dsputil_mmx.c
libswscale/x86/swscale_mmx.c
tests/Makefile
tests/fate2.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ulti: Fix invalid reads
lavf: dealloc private options in av_write_trailer
yadif: support 10bit YUV
vc1: mark with ER_MB_ERROR bits overconsumption
lavc: introduce ER_MB_END and ER_MB_ERROR
error_resilience: use the ER_ namespace
build: move inclusion of subdir.mak to main subdir loop
rv34: NEON optimised 4x4 dequant
rv34: move 4x4 dequant to RV34DSPContext
aacdec: Use intfloat.h rather than local punning union.
Conflicts:
libavcodec/h264.c
libavcodec/vc1dec.c
libavfilter/vf_yadif.c
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch is a generalization of what Michael Niedermayer
fixed in a single case.
The wmv8-drm fate test had been updated accordingly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
As far as I could see the only change is increased pos values,
which is as expected with additional metadata in the files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
I am not entirely sure the seek functionality is working correctly,
there are some strange cases like successful seek but no dts value.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (21 commits)
Warn about avserver being broken.
avconv: drop code for special handling of avserver streams.
rawdec: don't set codec timebase.
lavf doxy: add muxing stuff to lavf_encoding group
lavf doxy: add demuxing stuff to lavf_decoding group
lavf doxy: expand/reword metadata API doxy.
lavf doxy: add installed headers to groups.
lavf doxy: add avio groups into the lavf_io group.
lavf doxy: rename lavf I/O group to lavf_io.
lavf doxy: add metadata docs to the main lavf group
ttadec: check channel count as read from extradata.
Add CLJR encoding and decoding regression tests
cljr: remove unused code
flacdec: Support for tracks in cuesheet metadata block
ptx: fix inverted check for sufficient data
flac muxer: fix writing of file header and STREAMINFO header from extradata
ptx: emit a warning on insufficient picture data
utvideo: add fate tests covering all codec variants
doc: update to refer to avconv
doc: remove some stale entries from the faq
...
Conflicts:
Changelog
avconv.c
doc/avconv.texi
doc/faq.texi
doc/ffplay.texi
doc/ffprobe.texi
doc/ffserver.texi
libavcodec/avcodec.h
libavcodec/cljr.c
libavformat/avformat.h
libavformat/riff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
isom: sort and pretty-print codec_movaudio_tags[]
isom: remove pointless comments in codec_movaudio_tags[]
isom: remove commented-out tag for vorbis
movenc: write 'chan' tag for AC-3 in MOV
mov: add support for reading and writing the 'chan' tag
audioconvert: add some additional channel and channel layout macros
audioconvert: change 7.1 "wide" layout to use side surround channels
movenc: simplify handling of pcm vs. adpcm vs. other compressed codecs
doc: update documentation to use avconv
doc: update demuxers section
doc: extend external library coverage
doc: split platform specific information
doc: port the git-howto to texinfo
doc: provide fallback css and customize @float
doc: document fate in a texinfo
doxy: change hue value to match our green
Conflicts:
doc/fate.txt
doc/ffserver.texi
doc/general.texi
doc/muxers.texi
doc/protocols.texi
doc/t2h.init
libavformat/isom.c
libavformat/mov.c
libavutil/avutil.h
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
* tjoppen/opatom_demuxing_and_seeking:
mxfdec: Index table driven demuxing and seeking
mxfdec: Compute packet offsets properly
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack
mxfdec: Parse more values in PartitionPack
mxfdec: Parse TemporalOffsets
mxfdec: av_dlog():ify 'no corresponding source package found'
mxfdec: Compute essence container offsets and lengths into mxf->partitions
mxfdec: Make mxf->partitions sorted by offset
mxfdec: Parse ThisPartition
mxfdec: Speed up metadata and index parsing
mxfdec: Make sure DataDefinition is consistent between material track and source track
mxfdec: Add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In 1bpp mode, interpret skip&0x80 as "start a new line" instead of "go to next line", this is almost the same except for the first line which was always skipped before and caused to try to write an extra line at the end of the frame (ticket #226).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The default of 9 gives different results on different FATE systems.
However the zlib test using compression level 6 works, so
try this instead.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
mov: Don't av_malloc(0).
avconv: only allocate 1 AVFrame per input stream
avconv: fix memleaks due to not freeing the AVFrame for audio
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
misc Doxygen markup improvements
doxygen: eliminate Qt-style doxygen syntax
g722: Add a regression test for muxing/demuxing in wav
g722: Change bits per sample to 4
g722dec: Signal skipping the lower bits via AVOptions instead of bits_per_coded_sample
api-example: update to use avcodec_decode_audio4()
avplay: use avcodec_decode_audio4()
avplay: use a separate buffer for playing silence
avformat: use avcodec_decode_audio4() in avformat_find_stream_info()
avconv: use avcodec_decode_audio4() instead of avcodec_decode_audio3()
mov: Allow empty stts atom.
doc: document preferred Doxygen syntax and make patcheck detect it
Conflicts:
avconv.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/version.h
libavformat/mov.c
tests/codec-regression.sh
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
More specifically, PNG, v210, zlib and zmbv codecs.
zmbv needs vf_scale to be able to produce PAL8.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
While quality is bad, PAL8 support is needed to allow testing some
encoders that only support PAL8 input.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
h264: fix frame reordering code.
fate: Add a test for the VBLE decoder
doc: break some long lines in developer.texi
drawtext: make x and y parametric
drawtext: manage memory allocation better
drawtext: refactor draw_text
doc: remove space between variable and post increment in example code
Conflicts:
doc/developer.texi
doc/filters.texi
libavcodec/h264.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
