This avoids a potential division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Also return a proper error code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Also pass on any returned error code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously the wrong buffer pointer was checked, when buf
instead of *buf was checked. But checking the return value
instead is even better.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If idx equaled num_coeffs - 1 on entry to the loop, the previous
check failed to break out of the loop.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The volatile is not required here, and prevents a miscompilation with GCC
4.8.1 when building on x86 with --cpu=i686
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The sample buffering logic does not take into account that the blocksize
could change. Reset the buffer if the channel configuration changes,
since if there are leftover samples, it is most likely a broken or
misconcatenated stream. This could lead to negative numbers for
missing_samples during decoding.
Thanks to Michael Niedermeyer for pointing these out.
Also don't pointlessly set the buffer size to 1 after copying
one packet.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that linesize * start_y doesn't overflow, so that
emulated_edge_mc can get back the original value if needed.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The code tries to decode a number of channels at the
offset given by the ff_alac_channel_layout_offsets table.
Even if the number of channels decoded so far doesn't
exceed the total number of channels, we need to check that
we actually can decode that number of channels at this offset
as well.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Otherwise buffer size calculations in allocate_buffers could
overflow later, making the code think a large enough buffer
actually was allocated.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Otherwise picmemset can get called with negative y, resulting in an
invalid write.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Remove the header decoding for PCM audio from mpeg.c and the
20/24bit parts from pcm.c and merge them into a new decoder in
pcm-dvd.c.
The decoder has added support for samples that span multiple
packets and modified 20/24bit group decoding. Both is needed to
decode samples that have been generated with DVD-Lab Pro 2. The
decoding of 16bit PCM and two channel 24bit is identical to
before. No other samples are known to verify the correctness of
the encoding this software does.
The complete list of tested formats is
48kHz/16bit/2-8 channels
48kHz/24bit/2-5 channels
96kHz/16bit/2-4 channels
96kHz/24bit/2 channels
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The original idea was to collect PCM codecs that could appear in various
MPEG streams in this file. Discussion in IRC lead to the conclusion that
one codec per file would be better and stop the need for #ifdefs.
Only consume an AVPacket when all the samples have been read.
When the rate of samples output is limited (by the default value
of max_samples), consuming the first packet immediately will cause
timing problems:
- The first packet with PTS 0 will output 4608 samples and be
consumed entirely
- The second packet with PTS 64 will output the remaining samples
(typically, a lot, that's why max_samples exist) until the decoded
samples of the first packet have been exhausted, at which point the
samples of the second packet will be decoded and output when
av_decode_frame is called with the next packet).
That means there's a PTS jump since the first packet is 'decoded'
immediately, which can be seen with avplay or mplayer: the timing
jumps immediately to 6.2s (which is the size of a packet).
Sample: http://streams.videolan.org/issues/6348/Goldwave-MAClib.ape
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
This both allows factoring out size check for both MetaSound and TwinVQ-VQF
decoders and fixes the situation when there are several MetaSound frames
stuffed together (that happens in 8kHz @ 8kbps MetaSound in ASF for example).
Implicit vector loads on POWER7 hardware can use the VSX
instruction set instead of classic Altivec/VMX. Let's force
a VMX load in this case.
Signed-off-by: Martin Storsjö <martin@martin.st>
The decompressed buffer can be used after codec_reinit, so it must be
preserved.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Update the fate reference since the last broken frame is not decoded
anymore.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Add one copy of the function into each of the libraries, similarly
to what we do for log2_tab. When using static libs, only one
copy of the file_open.o object file gets included, while when
using shared libraries, each of them get a copy of its own.
This fixes DLL builds with a statically linked C runtime, where
each DLL effectively has got its own instance of the C runtime,
where file descriptors can't be shared across runtimes.
On systems not using msvcrt, the function is not duplicated.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 508.8 23.4 185.4 9.0 +174.4%
Overall 3068.5 31.7 2752.1 29.4 +11.5%
In combination with the preceding patch:
Before After
Mean StdDev Mean StdDev Change
Overall 2925.6 26.2 2752.1 29.4 +6.3%
Signed-off-by: Martin Storsjö <martin@martin.st>
This performs the start code search which was previously part of
h264_find_frame_end() - the most CPU intensive part of the function.
By itself, this results in a performance regression:
Before After
Mean StdDev Mean StdDev Change
Overall time 2925.6 26.2 3068.5 31.7 -4.7%
but this can more than be made up for by platform-optimised
implementations of the function.
Signed-off-by: Martin Storsjö <martin@martin.st>
Each AVStream struct for an H.264 elementary stream actually has two
copies of the H264DSPContext struct (and in fact all the other members
of H264Context as well):
((H264Context *) ((AVStream *)st)->codec->priv_data)->h264dsp
((H264Context *) ((AVStream *)st)->parser->priv_data)->h264dsp
but only the first of these was actually being initialised. This
prevented the addition of platform-specific implementations of
parser-related functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
The options table is used in tools built by the host compiler and the
deprecation macros pull in bits that are not safe to use if host and
target compiler differ.
This is required for the future addition of VoxWare MetaSound decoder, for its
functions are mostly the same but bitstream reader is completely different
and bitstream format is slightly different too.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The common case of the pointer having increased by one packet (which results
in no change to the modulus) can be detected with a 64-bit subtraction,
which is far cheaper than a division on many platforms.
Before After
Mean StdDev Mean StdDev Change
Divisions 248.3 8.8 51.5 7.4 +381.7%
Overall 2773.2 25.6 2372.5 43.1 +16.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
The bitstream buffers are now private and freed by libavcodec. For
backward compatibility, the hold bitstream buffer pointer is left NULL
(applications were supposed to av_freep() it).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Slice threading does not work with hardware acceleration, as decoding
is per-picture. This fixes Bugzilla #542.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
VDPAU expects the bitstream value (0, 2 or 3).
libavcodec uses an enum (0, 1 or 2).
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
When building for iOS in thumb mode, gas-preprocessor.pl doesn't
mark unused labels as thumb functions (as it does for other
local labels, where it can figure out that they are functions
due to being referenced in branch instructions). This leads to
linker warnings for some of those local labels, such as:
ld: warning: ARM function not 4-byte aligned: __a_evaluation from
libavcodec/libavcodec.a(simple_idct_arm.o)
Therefore, comment them out since they don't have any function.
They do still have a value in documenting key points in the
assembly source though.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1323.0 98.0 746.2 60.6 +77.3%
Overall 15400.0 336.4 14147.5 288.4 +8.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1389.3 4.2 967.8 35.1 +43.6%
Overall 15577.5 83.2 15400.0 336.4 +1.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 868.2 33.5 436.0 27.0 +99.1%
Overall 15973.0 223.2 15577.5 83.2 +2.5%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 2653.0 28.5 1108.8 51.4 +139.3%
Overall 17049.5 408.2 15973.0 223.2 +6.7%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 366.2 18.3 277.8 13.7 +31.9%
Overall 18420.5 489.1 17049.5 408.2 +8.0%
Signed-off-by: Martin Storsjö <martin@martin.st>
This is similar to int32_to_float_fmul_scalar, but
loads a new scalar multiplier every 8 input samples.
This enables the use of much larger input arrays, which
is important for pipelining on some CPUs (such as
ARMv6).
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1175.0 4.4 366.2 18.3 +220.8%
Overall 19285.5 292.0 18420.5 489.1 +4.7%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 9295.0 114.9 4853.2 83.5 +91.5%
Overall 23699.8 397.6 19285.5 292.0 +22.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
libx264 has a few data exports which require X264_API_IMPORTS
to be defined if we link to libx264 dynamically on Windows.
In a similar fashion to how we handle our compat snprintf
implementation, if we define it all the time, the compiler
will first try and link to __imp_x264_symbol_name, and failing
that, as in the case of a static libx264, will attempt to link
to the non-prefixed symbol, which has already been pulled in by
other x264 functions' object files.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This was handled properly in the normal return case at the end
of the function, but not in this special case.
Returning a value larger than the input packet size can cause
problems for certain library users.
Returning the actual input buffer size unconditionally, since
it is not guaranteed that frame_size is set to a sensible
value at this point.
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
A frame marked FRAMETYPE_NULL cannot be scalable and requires a
previous frame successfully decoded.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
If the channel mapping map multiple output channels to one
input channel, we should only increment the actual pointer once.
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The faulty values rippled further down the codepath causing a
hard-to-track segfault in the assembly code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Checking per subband would have the index exceed the
dithering noise table size.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
For some unclear reason Apple decided to use the same scan tables for luma and
chroma in the progressive mode while using different ones for luma in the
interlaced mode.
Split stepsize and data into int and float variants.
Eliminates a number of casts and simplifies spotting errors.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Currently we are using an array with a static data size.
Similar to a patch with the same purpose by Michael Niedermayer.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
