* commit 'b3b0b35db2f3b61bf2f0f4fa85f5b6267d83c8fe':
movenc: Get rid of a hack for updating the dvc1 atom
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '847bf5988fec1d3e65c1d8cf0cdb8caf0cfd0c1b':
movenc: Add an option for delaying writing the moov with empty_moov
Conflicts:
libavformat/movenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use the more generic approach with the delay_moov flag, instead of
having a update mechanism specific to this one single atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
This delays writing the moov until the first fragment is written,
or can be flushed by the caller explicitly when wanted. If the first
sample in all streams is available at this point, we can write
a proper editlist at this point, allowing streams to start at
something else than dts=0. For AC3 and DNXHD, a packet is
needed in order to write the moov header properly.
This isn't added to the normal behaviour for empty_moov, since
the behaviour that ftyp+moov is written during avformat_write_header
would be changed. Callers that split the output stream into header+segments
(either by flushing manually, with the custom_frag flag set, or by
just differentiating between data written during avformat_write_header
and the rest) will need to be adjusted to take this option into use.
For handling streams that start at something else than dts=0, an
alternative would be to use different kinds of heuristics for
guessing the start dts (using AVCodecContext delay or has_b_frames
together with the frame rate), but this is not reliable and doesn't
necessarily work well with stream copy, and wouldn't work for getting
the right initialization data for AC3 or DNXHD either.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '59f0275dd0a42a7f90271a83a78e9ca5e69ff5b0':
movenc: Adjust the pts of new fragments similarly to what is done for dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pts and the corresponding duration is written in sidx
atoms, thus make sure these match up correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'ee37620b6ae4783cda637408422044b2d14a688c':
movenc: Add a flag for indicating a discontinuous fragment
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows creating a later mp4 fragment without sequentially
writing the earlier ones before (when called from a segmenter).
Normally when writing a fragmented mp4 file sequentially, the
first timestamps of a fragment are adjusted to match the
end of the previous fragment, to make sure the timestamp is the
same, even if it is calculated as the sum of previous fragment
durations. (And for the first packet in a file, the offset of
the first packet is written using an edit list.)
When writing an individual mp4 fragment discontinuously like this
(with potentially writing the earlier fragments separately later),
there's a risk of getting a gap in the timeline if the duration
field of the last packet in the previous fragment doesn't match up
with the start time of the next fragment.
Using this requires setting -avoid_negative_ts make_non_negative
(or -avoid_negative_ts 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '40ed1cbf147d09fc0894bee160f0b6b6d9159fc5':
movenc: Allow writing a DASH sidx atom at the start of files
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2ded57371abead879bcee56da5131e5fac0d17ef':
movenc: Add support for writing sidx atoms for DASH segments
Conflicts:
Changelog
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d9d6afb8d2f284f5e620ecc19f643d5cd3facb8':
movenc: Factorize adding fragment info into a separate function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1d8a0c1b43e58332a3a15c67d4adc161713cade8':
movenc: Allow to request not to use edit lists
Conflicts:
libavformat/movenc.c
See: 537ef8bebf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In this case, shift tracks to start from zero instead (potentially
stretching the first sample in tracks that start later than the
first one).
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. This results in AV sync errors when
edit lists are used to adjust AV sync.
Some players, such as QuickTime, don't respect the duration for
audio packets, so if an audio track starts later than the video
track and the first audio sample gets a duration longer than the
actual amount of data in it, the result will be out of sync.
Based on patches by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2f221b6a9365aa400061e16266f2d1242f7169f8':
movenc: Define the flag bits using shifts instead of as decimal numbers
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '573b1de2d7f1db71030f91ecdded7d0bc071f6b6':
movenc: Don't use track_id to decide which track is the first in a moof
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
If one track doesn't have any samples within a moof, no traf/trun
is written for it. When the omit_tfhd_offset flag is set, none
of the tfhd atoms have any base_data_offset set, and the implicit
offset (end of previous track fragment data, or start of the moof
for the first trun) is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
Support only one independent substream right now, and only syncframes
containing 6 blocks.
Fixes part of ticket #3074
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'da9cc22d5bd5f59756c2037b02966376da2cf323':
movenc: add track title to tracks
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f90729699db9ede2bef2b28000f1795dab1b8996':
mov: Do not group tracks if more than one is enabled per type
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0ba5299a805e9ccaef1a757381fc2ada4d54b8a1':
movenc: use the "encoder" metadata tag to write stsd Compressorname
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1e9db41e2a2166be5671b088ef4ad06a40af459f':
movenc: Allow override of major brand in ftyp atom
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
F4V is Adobe's mp4/iso media variant, with the most significant
addition/change being supporting other flash codecs than just
aac/h264.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
movenc: Add an option for omitting the tfhd base offset
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.
This simplifies future cases where this field needs to be set to
something different.
Signed-off-by: Martin Storsjö <martin@martin.st>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'ab1189766a82a95f108005463cde75f73fcc0ae5':
movenc: Increase the cluster array allocation by doubling
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b4feac1ec14f861bdd7f494f288f4d8dd7f449e':
movenc: Keep track of the allocated size for the cluster array
mem: Add av_realloc_array and av_reallocp_array
Conflicts:
doc/APIchanges
libavformat/movenc.c
libavutil/mem.c
libavutil/mem.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
