* qatar/master:
mxfdec: replace x>>av_log2(sizeof(..)) by x/sizeof(..).
x86: h264_intrapred: Don't add the 'd' suffix to the SPLATB_REG macro
Conflicts:
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
The reason for this is that such files have IndexTableSegments which when parsed
cover EditUnit ranges like this:
[0,1)
[249,250)
[249,377)
[0,249)
where each interval is [IndexStartPosition,IndexStartPosition+IndexDuration).
This would be reduced to a sparse index like:
[0,1), [249,250)
instead of the full range:
[0,249), [249,377)
See TimeCode_HD.mxf, UMID =
060a2b340101010101010410130000000004001aa0e59175025b2a5600da4101.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
We can't do this in general since we could be reading a file with B-frames while
lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file that triggered
that behavior had two ECs, not zero. Hence distinguishing between them is
simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes rare cases where OPAtom may be treated as OP1a, causing all essence
to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (26 commits)
eac3dec: replace undefined 1<<31 with INT32_MIN in noise generation
yadif: specify array size outside DECLARE_ALIGNED
prores: specify array size outside DECLARE_ALIGNED brackets.
WavPack demuxer: set packet duration
tta: use skip_bits_long()
mxfdec: Ignore the last entry in Avid's index table segments
mxfdec: Sanity-check SampleRate
mxfdec: Handle small EditUnitByteCount
mxfdec: Consider OPAtom files that do not have exactly one EC to be OP1a
mxfdec: Don't crash in mxf_packet_timestamps() if current_edit_unit overflows
mxfdec: Zero nb_ptses in mxf_compute_ptses_fake_index()
mxfdec: Sanity check PreviousPartition
mxfdec: Never seek back in local sets and KLVs
mxfdec: Move the current_partition check inside mxf_read_header()
mxfdec: Fix infinite loop in mxf_packet_timestamps()
mxfdec: Check eof_reached in mxf_read_local_tags()
mxfdec: Check for NULL component
mxfdec: Make sure mxf->nb_index_tables > 0 in mxf_packet_timestamps()
mxfdec: Make sure x < index_table->nb_ptses
build: Add missing directories to DIRS declarations.
...
Conflicts:
doc/build_system.txt
doc/fate.texi
libavfilter/x86/yadif_template.c
libavformat/mxfdec.c
libavutil/Makefile
tests/fate/audio.mak
tests/fate/prores.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/ref/fate/bethsoft-vid
tests/ref/fate/cscd
tests/ref/fate/dfa4
tests/ref/fate/nuv
tests/ref/fate/vp8-sign-bias
tests/ref/fate/wmv8-drm
tests/ref/lavf/gxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though
segments like these are expected.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
These are common with audio atoms. Without this the demuxer would read two
bytes at a time for a mono 16-bit file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend
past the end of the set and not allowing other KLVs to be read past
the end of themselves.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This can happen if an index table segment has a very large IndexStartPosition.
zzuf3.mxf is an example of such a file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Only the OPAtom demuxing logic is guaranteed to have index tables,
meaning OP1a files that lack an index would cause SIGSEGV.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
smacker: Sanity check huffman tables found in the headers.
smacker: remove dead store
qdm2: Check data block size for bytes to bits overflow.
mxfdec: Fix files with essence containers larger than 2 GiB.
mxfdec: Employ correct printf conversion specifiers for POSIX int types.
vc1: always read the bfraction element for interlaced fields
fate: add XWD image regression test
lavf: prevent infinite loops while flushing in avformat_find_stream_info
matroskadec: Pad AAC extradata.
ismindex: Fix build on mingw
Conflicts:
libavformat/mxfdec.c
libavformat/utils.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend past the
end of the set and not allowing other KLVs to be read past the end of
themselves.
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though segments like
these are expected.
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we don't
use delta entries or slices, only StreamOffsets.
OPAtom seeking basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
This fixes ticket #746.
This changes mxf_compute_ptses() to be used for MXFIndexTable, and also adds
code for computing the fake index to it.
This also temporarily disables PTS computation. A future patch will restore it.
These indexes duplicate every entry and have the total size of the essence
container as the last entry.
This patch also computes the size of the packets when unknown.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I thought it had to do with file offsets, but's actually the offset inside
the essence container.
In other words, unbreak multiple EditUnitByteCounts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These values include KAGSize, HeaderByteCount and IndexByteCount.
The length of the pack itself is also stored, and KAGSize is sanity checked.
The FATE sample has KAGSize == 0, which is adjusted to 512.
Other bad KAGSizes are set to 1.
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers aren't needlessly
parsed. This speeds up parsing large files a lot.
* qatar/master:
rtpdec: Templatize the code for different g726 bitrate variants
rv40: move loop filter to rv34dsp context
lavf: make av_set_pts_info private.
rtpdec: Add support for G726 audio
rtpdec: Add an init function that can do custom codec context initialization
avconv: make copy_tb on by default.
matroskadec: don't set codec timebase.
rmdec: don't set codec timebase.
avconv: compute next_pts from input packet duration when possible.
lavf: estimate frame duration from r_frame_rate.
avconv: update InputStream.pts in the streamcopy case.
Conflicts:
avconv.c
libavdevice/alsa-audio-dec.c
libavdevice/bktr.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavdevice/oss_audio.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavdevice/vfwcap.c
libavdevice/x11grab.c
libavformat/au.c
libavformat/eacdata.c
libavformat/flvdec.c
libavformat/mpegts.c
libavformat/mxfenc.c
libavformat/rtpdec_g726.c
libavformat/wtv.c
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tls: Use ERR_get_error() in do_tls_poll
indeo3: Fix a fencepost error.
mxfdec: Fix comparison of unsigned expression < 0.
mpegts: set stream id on just created stream, not an unrelated variable
ra288: return error if input buffer is too small
ra288: utilize DSPContext.vector_fmul()
ra288: use memcpy() to copy decoded samples to output
mace: only calculate output buffer size once
Remove redundant filename self-references inside files.
indeo3data: add missing config.h #include for HAVE_BIGENDIAN
x86: drop pointless ARCH_X86 #ifdef from files in x86 subdirectory
avplay: reset rdft when closing stream.
doc/git-howto: expand format-patch and send-email notes.
lavf: expand doxy for some AVFormatContext fields.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (53 commits)
probe: Restore identification of files with very large id3 tags and no extension.
probe: Remove id3 tag presence as a criteria to do file extension checking.
mpegts: MP4 SL support
mpegts: MP4 OD support
mpegts: Add support for Sections in PMT
mpegts: Replace the MP4 descriptor parser with a recursive parser.
mpegts: Add support for multiple mp4 descriptors
mpegts: Parse mpeg2 SL descriptors.
isom: Add MPEG4SYSTEMS dummy object type indication.
aacdec: allow output reconfiguration on channel changes
nellymoserenc: take float input samples instead of int16
nellymoserdec: use dsp functions for overlap and windowing
nellymoserdec: do not fail if there is extra data in the packet
nellymoserdec: fail if output buffer is too small
nellymoserdec: remove pointless buffer size check.
lavf: add init_put_byte() to the list of visible symbols.
seek-test: free options dictionary after use
snow: do not draw_edge if emu_edge is set
tools/pktdumper: update to recent avformat api
seek-test: update to recent avformat api
...
Conflicts:
doc/APIchanges
libavcodec/mpegaudiodec.c
libavcodec/nellymoserdec.c
libavcodec/snow.c
libavcodec/version.h
libavcodec/wmadec.c
libavformat/avformat.h
libavformat/mpegts.c
libavformat/mxfdec.c
libavformat/utils.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
presets: rename presets directory
lavc: make avcodec_get_context_defaults3 "officially" public
lavf: replace av_new_stream->avformat_new_stream part II.
lavf,lavd: replace av_new_stream->avformat_new_stream part I.
lavf: add avformat_new_stream as a replacement for av_new_stream.
Use correct scaling table for bwd-pred MVs in second B-field
Ut Video decoder
Makefile: change presets extension to .avpreset
lavfi: add rgbtestsrc source, ported from MPlayer libmpcodecs
lavfi: add testsrc source
AVOptions: add documentation.
presets: update libx264 ffpresets
Conflicts:
Changelog
doc/APIchanges
doc/ffmpeg.texi
ffpresets/libx264-ipod320.ffpreset
ffpresets/libx264-ipod640.ffpreset
ffserver.c
libavcodec/avcodec.h
libavcodec/options.c
libavcodec/version.h
libavdevice/libdc1394.c
libavfilter/avfilter.h
libavfilter/vsrc_testsrc.c
libavformat/flvdec.c
libavformat/riff.c
libavformat/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Manual replacements are done in this commit.
In many cases, the id is some constant made up number (e.g. 0 for video
and 1 for audio), which is then not used in the demuxer for anything.
Those ids are removed.
* qatar/master: (34 commits)
h264: reset h->ref_count in case of errors in ff_h264_decode_ref_pic_list_reordering()
error_resilience: fix the check for missing references in ff_er_frame_end() for H264
4xm: prevent NULL dereference with invalid huffman table
4xmdemux: prevent use of uninitialized memory
4xm: clear FF_INPUT_BUFFER_PADDING_SIZE bytes in temporary buffers
ptx: check for out of bound reads
tiffdec: fix out of bound reads/writes
eacmv: check for out of bound reads
eacmv: fix potential pointer arithmetic overflows
adpcm: fix out of bound reads due to integer overflow
anm: prevent infinite loop
avsdemux: check for out of bound writes
avs: check for out of bound reads
avsdemux: check for corrupted data
AVOptions: refactor set_number/write_number
AVOptions: cosmetics, rename static av_set_number2() to write_number().
AVOptions: cosmetics, move and rename static av_set_number().
AVOptions: split av_set_string3 into opt type-specific functions
avidec: fix signed overflow in avi_sync()
mxfdec: Fix some buffer overreads caused by the misuse of AVPacket related functions.
...
Conflicts:
Changelog
configure
libavcodec/ptx.c
libavcodec/ra144.c
libavcodec/vaapi_vc1.c
libavcodec/vc1.c
libavcodec/version.h
libavformat/4xm.c
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mxfdec: Include FF_INPUT_BUFFER_PADDING_SIZE when allocating extradata.
H.264: tweak some other x86 asm for Atom
probe: Fix insane flow control.
mpegts: remove invalid error check
s302m: use nondeprecated audio sample format API
lavc: use designated initialisers for all codecs.
x86: cabac: add operand size suffixes missing from 6c32576
Conflicts:
libavcodec/ac3enc_float.c
libavcodec/flacenc.c
libavcodec/frwu.c
libavcodec/pictordec.c
libavcodec/qtrleenc.c
libavcodec/v210enc.c
libavcodec/wmv2dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ffmpeg: fix some indentation
ffmpeg: fix operation with --disable-avfilter
simple_idct: remove disabled code
motion_est: remove disabled code
vc1: remove disabled code
fate: separate lavf-mxf_d10 test from lavf-mxf
cabac: Move code only used in the cabac test program to cabac.c.
ffplay: warn that -pix_fmt is no longer working, suggest alternative
ffplay: warn that -s is no longer working, suggest alternative
lavf: rename enc variable in utils.c:has_codec_parameters()
lavf: use designated initialisers for all (de)muxers.
wav: remove a use of deprecated AV_METADATA_ macro
rmdec: remove useless ap parameter from rm_read_header_old()
dct-test: remove write-only variable
des: fix #if conditional around P_shuffle
Use LOCAL_ALIGNED in ff_check_alignment()
Conflicts:
ffmpeg.c
libavformat/avidec.c
libavformat/matroskaenc.c
libavformat/mp3enc.c
libavformat/oggenc.c
libavformat/utils.c
tests/ref/lavf/mxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (40 commits)
H.264: template left MB handling
H.264: faster fill_decode_caches
H.264: faster write_back_*
H.264: faster fill_filter_caches
H.264: make filter_mb_fast support the case of unavailable top mb
Do not include log.h in avutil.h
Do not include pixfmt.h in avutil.h
Do not include rational.h in avutil.h
Do not include mathematics.h in avutil.h
Do not include intfloat_readwrite.h in avutil.h
Remove return statements following infinite loops without break
RTSP: Doxygen comment cleanup
doxygen: Escape '\' in Doxygen documentation.
md5: cosmetics
md5: use AV_WL32 to write result
md5: add fate test
md5: include correct headers
md5: fix test program
doxygen: Drop array size declarations from Doxygen parameter names.
doxygen: Fix parameter names to match the function prototypes.
...
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/flvenc.c
libavformat/oggenc.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In the name of consistency:
get_byte -> avio_r8
get_<type> -> avio_r<type>
get_buffer -> avio_read
get_partial_buffer will be made private later
get_strz is left out becase I want to change it later to return
something useful.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit b7effd4e83)
In the name of consistency:
get_byte -> avio_r8
get_<type> -> avio_r<type>
get_buffer -> avio_read
get_partial_buffer will be made private later
get_strz is left out becase I want to change it later to return
something useful.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
