* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '7ae9791b641d1183910b6e7faca23f7ae08f8579':
avformat: bump version after mime_type change
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Martin Storsjö <martin@martin.st>
After this the order from the original file is stored through readorder
when doing ffmpeg -i input.ass -c copy output.mkv.
And now that the ASS muxer honors the ReadOrder, extracting the ass back
(without transcoding) restores the original order.
* commit 'b263f8ffe7599d9cd27ec477a12700da8eb2790d':
lavf: add AVFormatContext.max_ts_probe
Conflicts:
doc/APIchanges
libavformat/avformat.h
libavformat/utils.c
libavformat/version.h
lavf-fate/mp3 changes as the estimated input bitrate changes and that is
copied to the output
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '051aadeed104ecbe8ee4850ec2d7e5394f5e1ccd':
ogg: Provide aliases for Speex, Opus and audio-only ogg
Conflicts:
Changelog
libavformat/oggenc.c
libavformat/version.h
See: 2ccc6ff03a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'afbd4b7e093adf6d7a830b32759ca3ba8500363d':
lavf: add AVFormatContext/AVStream fields for signaling to the user when events happen.
Conflicts:
libavformat/avformat.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The only flags, for now, indicate if metadata was updated and are set after each call to
av_read_frame(). This comes with the caveat that, on stream start, it might not be set properly
as packets might be buffered in AVFormatContext.packet_buffer before being given to the user
in av_read_frame().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'f4c444e17d137c786f0ed2da0e5943df505d5f9e':
Postpone API-incompatible changes until the next bump.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It's a public function and should use the avio_ namespace
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The were wrongly being exported and used by libavdevice
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3a19405d574a467c68b48e4b824c76617fd59de0':
avformat: Use the mime type information in input probe
Conflicts:
libavformat/format.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds the ability to generate WebM DASH manifest XML using
ffmpeg. A sample command line would be as follows:
ffmpeg \
-f webm_dash_manifest -i video1.webm \
-f webm_dash_manifest -i video2.webm \
-f webm_dash_manifest -i audio1.webm \
-f webm_dash_manifest -i audio2.webm \
-map 0 -map 1 -map 2 -map 3 \
-c copy \
-f webm_dash_manifest \
-adaptation_sets “id=0,streams=0,1 id=1,streams=2,3” \
manifest.xml
It works by exporting necessary fields as metadata tags in matroskadec
and use those values to write the appropriate XML fields as per the WebM
DASH Specification [1]. Some ideas are adopted from webm-tools project
[2].
[1]
https://sites.google.com/a/webmproject.org/wiki/adaptive-streaming/webm-dash-specification
[2]
https://chromium.googlesource.com/webm/webm-tools/+/master/webm_dash_manifest/
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AVStream.parser field is considered private and its location cannot be
preserved while preserving also ABI compatibility to libav, as libav added fields
before it.
Some tools like ffmpeg.c access this field though
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '194be1f43ea391eb986732707435176e579265aa':
lavf: switch to AVStream.time_base as the hint for the muxer timebase
Conflicts:
doc/APIchanges
libavformat/filmstripenc.c
libavformat/movenc.c
libavformat/mxfenc.c
libavformat/oggenc.c
libavformat/swf.h
libavformat/version.h
tests/ref/lavf/mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
* commit '95b7fa1729b93bbb3f4fb85a5c0cb53cf970c3c7':
oggenc: Support flushing the muxer
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the caller to write all buffered data to disk, allowing
the caller to know at what byte position in the file a certain
packet starts (any packet written after the flush will be located
after that byte position).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '6d212599aa684f30511fb08ca30fe2378405304e':
avformat: Provide a standard compliance flag
Conflicts:
doc/APIchanges
libavformat/avformat.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a312f71090ee620ee252f2034aef6b13e2dafe9c':
lavf: deprecate now unused AVStream.pts
Conflicts:
libavformat/mux.c
libavformat/version.h
mostly not merged as the code is needed for a/vsync drop handling
and what the code does is what is needed, it could maybe be moved
elsewhere or factored somehow but simply removing it would be droping
these features.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use it instead of checking CODEC_FLAG_BITEXACT in the first stream's
codec context.
Using codec options inside lavf is fragile and can easily break when the
muxing codec context is not the encoding context.
* commit 'a1aa37dd0b96710d4a17718198a3f56aea2040c1':
matroskaenc: write CodecDelay
Conflicts:
libavformat/matroskaenc.c
tests/ref/lavf/mkv
tests/ref/seek/lavf-mkv
This is largely not merged as it causes assertion failures and av sync errors
Further investigation of this is warranted if the changes are found to
fix/improve something in relation to d92b1b1bab
See: d92b1b1bab
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Provides API to query device capabilities.
Each device must implement callbacks to benefit from this API.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
This is used only for distinguishing .pix formats for now.
Which is the only case that has image2 demuxers currently
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '25b32586566f285d797737863c97a1c5c9c84e2b':
lavf: add an AVStream field for exporting stream-global side data
Conflicts:
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For muxing, it accepts
both 0 and AV_NOPTS_VALUE. For demuxing, it will present
AV_NOPTS_VALUE when start_time_realtime is unknown.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
MicroDVD files are normally frame-based (i.e. there are no absolute
timestamps), but can have an optional frame rate header. If this
header is missing, the timestamps depend on the frame rate of the
video they were created for.
The demuxer will use a fallback frame rate if it's missing from the
header. Currently, applications using libavformat can't know whether
the time base is based on the fallback value, or if a frame rate
header was present.
This commit introduces a subfps AVOption for MicroDVD, and the
demuxer sets it if and only if a frame rate header was present.
Signed-off-by: Clément Bœsch <u@pkh.me>
Copy multiple languages data from PMT to extradata. New 5 bytes
per language extradata format.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Currently ff_interleave_packet_per_dts() waits until it gets a frame for
each stream before outputting packets in interleaved order.
Sparse streams (i.e. streams with much fewer packets than the other
streams, like subtitles or audio with DTX) tend to add up latency and in
specific cases end up allocating a large amount of memory.
Emit the top packet from the packet_buffer if it has a time delta
larger than a specified threshold.
Original report of the issue and initial proposed solution by
mus.svz@gmail.com.
Bug-id: 31
Signed-off-by: Anton Khirnov <anton@khirnov.net>
