It dropped the old headers, but the replacements are already available
with opencv 2.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If links don't work, fall back to using the full source path as was
previously done.
This should fix build failures with MSVC.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix configure to set DST_PATH to the Windows style path when building with MSVC
Fixes ticket #5180.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Previously the full source path was embedded inconsistently in the debug
information between in-tree/out-of-tree builds.
The 'vpath %.inc' becomes necessary for finding
libavfilter/all_channel_layouts.inc in out-of-tree builds.
The full source path is still embedded in the debug information, but
it's now independent of whether building in-tree or out-of-tree.
The biggest improvement of this patch is that gdb now always searches
for the path relative to the source directory. It still also searches
for the full path.
Previously it searched only for the full path in out-of-tree builds,
making the debug information generated by Debian's buildds rather hard
to use.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Before this patch trying to enable only https by issuing
--disable-protocols --enable-protocol=https --enable-gnutls
does not enable https, and
--disable-all --enable-protocols
does not enable libavformat and the protocols component.
Now the default-enabled options are set after the explicitly
disabled/enabled options are evaluated.
If an explicitly enabled option cannot be enabled configure
will fail printing an error message.
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The option became too aggressive with GCC 6, generating nearly 500
warnings from static const variables defined in assorted headers
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
It serves absolutely no purpose other than to confuse potentional
Android developers about how to use hardware acceleration properly
on the the platform. The stagefright "API" is not public, and the
MediaCodec API is the proper way to do this.
Furthermore, stagefright support in avcodec needs a series of
magic incantations and version-specific stuff, such that
using it actually provides downsides compared just using the actual
Android frameworks properly, in that it is a lot more work and confusion
to get it even running. It also leads to a lot of misinformation, like
these sorts of comments (in [1]) that are absolutely incorrect.
[1] http://stackoverflow.com/a/29362353/3115956
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Let's disable the ISAs first, and then the core capabilities, as we do
for the rest of the cores. This way the code is better organized.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Solves an issue that will get triggered when gcc 20 rolls in.
Found-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Replaces by real arithmetic. Tested the validity of these transformations separately.
Numerical differences are ~1e-15, and should not matter: it is not even
clear which is more precise mathematically.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
exp10 is a function available in GNU libm. Looks like no other common
libm has it. This adds support for it to FFmpeg.
There are essentially 2 ways of handling the fallback:
1. Using pow(10, x)
2. Using exp2(M_LOG2_10 * x).
First one represents a Pareto improvement, with no speed or accuracy
regression anywhere, but speed improvement limited to GNU libm.
Second one represents a slight accuracy loss (relative error ~ 1e-13)
for non GNU libm. Speedup of > 2x is obtained on non GNU libm platforms,
~30% on GNU libm. These are "average case numbers", another benefit is
the lack of triggering of the well-known terrible worst case paths
through pow.
Based on reviews, second one chosen. Comment added accordingly.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
complex is not available on all platforms. Furthermore, it is trivial to
rewrite complex number expressions to real arithmetic, and in fact
sometimes advantageous for performance reasons: by wrapping as a complex,
one forces a particular Cartesian representation that is not necessarily optimal for the purpose.
Configure dependencies also removed, and aemphasis is now available across
all platforms.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Source code is from Boost:
http://www.boost.org/doc/libs/1_46_1/boost/math/special_functions/erf.hpp
with appropriate modifications for FFmpeg.
Tested on interval -6 to 6 (beyond which it saturates), +/-NAN, +/-INFINITY
under -fsanitize=undefined on clang to test for possible undefined behavior.
This function turns out to actually be essentially as accurate and faster than the
libm (GNU/BSD's/Mac OS X), and I can think of 3 reasons why upstream
does not use this:
1. They are not aware of it.
2. They are concerned about licensing - this applies especially to GNU
libm.
3. They do not know and/or appreciate the benefits of rational
approximations over polynomial approximations. Boost uses them to great
effect, see e.g swr/resample for bessel derived from them, which is also
similarly superior to libm variants.
First, performance.
sample benchmark (clang -O3, Haswell, GNU/Linux):
3e8 values evenly spaced from 0 to 6
time (libm):
./test 13.39s user 0.00s system 100% cpu 13.376 total
time (boost based):
./test 9.20s user 0.00s system 100% cpu 9.190 total
Second, accuracy.
1e8 eval pts from 0 to 6
maxdiff (absolute): 2.2204460492503131e-16
occuring at point where libm erf is correctly rounded, this is not.
Illustration of superior rounding of this function:
arg : 0.83999999999999997
erf : 0.76514271145499457
boost : 0.76514271145499446
real : 0.76514271145499446
i.e libm is actually incorrectly rounded. Note that this is clear from:
https://github.com/JuliaLang/openlibm/blob/master/src/s_erf.c (the Sun
implementation used by both BSD and GNU libm's), where only 1 ulp is
guaranteed.
Reasons it is not easy/worthwhile to create a "correctly rounded"
variant of this function (i.e 0.5ulp):
1. Upstream libm's don't do it anyway, so we can't guarantee this unless
we force this implementation on all platforms. This is not easy, as the
linker would complain unless measures are taken.
2. Nothing in FFmpeg cares or can care about such things, due to the
above and FFmpeg's nature.
3. Creating a correctly rounded function will in practice need some use of long
double/fma. long double, although C89/C90, unfortunately has problems on
ppc. This needs fixing of toolchain flags/configure. In any case this
will be slower for miniscule gain.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
For systems with broken libms.
Tested with NAN, -NAN, INFINITY, -INFINITY, +/-x for regular double x and
combinations of these.
Old versions of MSVC need some UINT64_C hackery.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
arc4random() was designed as a superior interface for system random
number generation, designed for OpenBSD and subsequently incorporated by
other BSD's, Mac OS X, and some non-standard libc's. It is thus an improvement to
use it whenever available.
As a side note, this may or may not get included in glibc, and there is
a proposal to create a posix_random family based on these ideas:
http://austingroupbugs.net/view.php?id=859.
Tested on Mac OS X.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit 'e02de9df4b218bd6e1e927b67fd4075741545688':
lavc: export Dirac parsing API used by the ogg demuxer as public
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
