Also move the declaration to internal.h, and add restrict qualifiers
to the declaration (as in the implementation).
Signed-off-by: Martin Storsjö <martin@martin.st>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Because in contrast to the decoder, the parser does not setup low_delay.
The code in parse_nal_units would always end up setting has_b_frames
to "1", except when stream is explicitly marked as low delay.
Since the parser itself would create 'extradata', simply reopening
the parser would cause this.
This happens for instance in estimate_timings_from_pts(), which causes the
parser to be reopened on the same stream.
This fixes Libav #22 and FFmpeg (trac) #360
CC: libav-stable@libav.org
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
(commit 31ac0ac29b)
Comments and description adapted by Reinhard Tartler.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/master:
flicvideo: fix invalid reads
vorbis: Avoid some out-of-bounds reads
vqf: add more known extensions
cabac: remove unused function renorm_cabac_decoder
h264: Only use symbols from the SVQ3 decoder under proper conditionals.
add bytestream2_tell() and bytestream2_seek() functions
parsers: initialize MpegEncContext.slice_context_count to 1
spdifenc: use special alignment for DTS-HD length_code
Conflicts:
libavcodec/flicvideo.c
libavcodec/h264.c
libavcodec/mpeg4video_parser.c
libavcodec/vorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The mpeg4 video, H264 and VC-1 parser hold (directly or indirectly)
a MpegEncContext in their private context. Since they do not call the
common mpegvideo init function slice_context_count has explicitly set
to 1.
Prevents a null pointer dereference in the h264 parser and fixes
bug 193.
Start code emulation prevention is only required in Annex B bytestream
packed NAL units. For other coding formats the size is already known.
Looking for a start code prefix can result in false positives like in
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
which has a false positive in the SPS.
* qatar/master: (44 commits)
replacement Indeo 3 decoder
gsm demuxer: do not allocate packet twice.
flvenc: use first packet delay as global delay.
ac3enc: doxygen update.
imc: return error codes instead of 0 for error conditions.
imc: return meaningful error codes instead of -1
imc: do not set channel layout for stereo
imc: validate channel count
imc: check for ff_fft_init() failure
imc: check output buffer size before decoding
imc: use DSPContext.bswap16_buf() to byte-swap packet data
rtsp: add allowed_media_types option
libgsm: add flush function to reset the decoder state when seeking
libgsm: simplify decoding by using a loop
gsm: log error message when packet is too small
libgsmdec: do not needlessly set *data_size to 0
gsmdec: do not needlessly set *data_size to 0
gsmdec: add flush function to reset the decoder state when seeking
libgsmdec: check output buffer size before decoding
gsmdec: log error message when output buffer is too small.
...
Conflicts:
Changelog
ffplay.c
libavcodec/indeo3.c
libavcodec/mjpeg_parser.c
libavcodec/vp3.c
libavformat/cutils.c
libavformat/id3v2.c
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (47 commits)
lavc: hide private symbols.
lavc: deprecate img_get_alpha_info().
lavc: use avpriv_ prefix for ff_toupper4.
lavc: use avpriv_ prefix for ff_copy_bits and align_put_bits.
lavc: use avpriv_ prefix for ff_ac3_parse_header.
lavc: use avpriv_ prefix for ff_frame_rate_tab.
lavc: rename ff_find_start_code to avpriv_mpv_find_start_code
lavc: use avpriv_ prefix for ff_split_xiph_headers.
lavc: use avpriv_ prefix for ff_dirac_parse_sequence_header.
lavc: use avpriv_ prefix for some dv symbols used in lavf.
lavc: use avpriv_ prefix for some flac symbols used in lavf.
lavc: use avpriv_ prefix for some mpeg4audio symbols used in lavf.
lavc: use avpriv_ prefix for some mpegaudio symbols used in lavf.
lavc: use avpriv_ prefix for ff_aac_parse_header().
lavf: hide private symbols.
lavf: use avpriv_ prefix for some dv functions.
lavf: use avpriv_ prefix for ff_new_chapter().
avcodec: add CODEC_CAP_DELAY note to avcodec_decode_audio3() documentation
avcodec: clarify the CODEC_CAP_DELAY note in avcodec_decode_video2()
avcodec: clarify documentation of CODEC_CAP_DELAY
...
Conflicts:
configure
doc/general.texi
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dv.c
libavcodec/dvdata.c
libavcodec/dvdata.h
libavcodec/libspeexenc.c
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/avidec.c
libavformat/dv.c
libavformat/dv.h
libavformat/flvenc.c
libavformat/mov.c
libavformat/mp3enc.c
libavformat/oggparsespeex.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Due to it in contrast to the decoder not setting up low_delay,
the code in parse_nal_units would always end up setting has_b_frames
to 1 (except when stream is explicitly marked as low delay).
Since the parser itself would create extradata, simply reopening
the parser would cause this.
estimate_timings_from_pts would cause the parser to be reopened
on the same stream.
This fixes trac issue #360.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
doxygen: Consistently use '@' instead of '\' for Doxygen markup.
Use av_printf_format to check the usage of printf style functions
Add av_printf_format, for marking printf style format strings and their parameters
ARM: enable thumb for Cortex-M* CPUs
nsvdec: Propagate error values instead of returning 0 in nsv_read_header().
build: remove SRC_PATH_BARE variable
build: move basic rules and variables to main Makefile
build: move special targets to end of main Makefile
lavdev: improve feedback in case of invalid frame rate/size
vfwcap: prefer "framerate_q" over "fps" in vfw_read_header()
v4l2: prefer "framerate_q" over "fps" in v4l2_set_parameters()
fbdev: prefer "framerate_q" over "fps" in device context
bktr: prefer "framerate" over "fps" for grab_read_header()
ALSA: implement channel layout for playback.
alsa: support unsigned variants of already supported signed formats.
alsa: add support for more formats.
ARM: allow building in Thumb2 mode
Conflicts:
common.mak
doc/APIchanges
libavcodec/vdpau.h
libavdevice/alsa-audio-common.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the parser is buggy and only processes the stream extradata
when the flag is set. This fixes it to actually inspect the frames.
Whitespce will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Currently, the parser is buggy and only processes the stream extradata
when the flag is set. This fixes it to actually inspect the frames.
Whitespce will be fixed in a separate change.
Signed-off-by: Philip Langdale <philipl@overt.org>
None of these symbols should be accessed directly, so declare them as
hidden.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit d36beb3f69)
The header is empty after making the function static, so delete it and
drop its usage.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 13eb6b9097)
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
This allows freeing the parser memory in the thread_context freeing loop.
Patch by Rafaël Carré gmailify(rafael, carre)
Originally committed as revision 21508 to svn://svn.ffmpeg.org/ffmpeg/trunk
Fix:
==22063== Conditional jump or move depends on uninitialised value(s)
==22063== at 0x811A4B7: ff_find_start_code (mpegvideo.c:99)
==22063== by 0x82F5B74: parse_nal_units (h264_parser.c:132)
==22063== by 0x82F5A68: h264_parse (h264_parser.c:261)
[...]
==22063== Uninitialised value was created by a stack allocation
==22063== at 0x82F5AF5: parse_nal_units (h264_parser.c:112)
Originally committed as revision 18479 to svn://svn.ffmpeg.org/ffmpeg/trunk
This ensures that the parser will no longer leak memory for all SPS/PPS it encounters.
Originally committed as revision 18406 to svn://svn.ffmpeg.org/ffmpeg/trunk
Otherwise doxygen complains about ambiguous filenames when files exist
under the same name in different subdirectories.
Originally committed as revision 16912 to svn://svn.ffmpeg.org/ffmpeg/trunk
libavcodec/h264_parser.c(77): warning #589: transfer of control
bypasses initialization of:
variable "v" (declared at line 58)
goto found;
This new form also improves readability.
Patch by Diego 'Flameeyes' Pettenò %flameeyes A gmail P com%
Originally committed as revision 15526 to svn://svn.ffmpeg.org/ffmpeg/trunk
