During failure conditions ff_h264_decode_init() leaks memory
allocated for nal units. Found via valgrind.
Valgrind traces: http://pastebin.com/GqTqxs8T
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
rv40dsp x86: use only one register, for both increment and loop counter
rv40dsp: implement prescaled versions for biweight.
avconv: use default channel layouts when they are unknown
avconv: parse channel layout string
nutdec: K&R formatting cosmetics
vda: Signal 4 byte NAL headers to the decoder regardless of what's in the extradata
mem: Consistently return NULL for av_malloc(0)
vf_overlay: implement poll_frame()
vf_scale: support named constants for sws flags.
lavc doxy: add all installed headers to doxy groups.
lavc doxy: add avfft to the main lavc group.
lavc doxy: add remaining avcodec.h functions to a misc doxygen group.
lavc doxy: add AVPicture functions to a doxy group.
lavc doxy: add resampling functions to a doxy group.
lavc doxy: replace \ with /
lavc doxy: add encoding functions to a doxy group.
lavc doxy: add decoding functions to a doxy group.
lavc doxy: fix formatting of AV_PKT_DATA_{PARAM_CHANGE,H263_MB_INFO}
lavc doxy: add AVPacket-related stuff to a separate doxy group.
lavc doxy: add core functions/definitions to a doxy group.
...
Conflicts:
ffmpeg.c
libavcodec/avcodec.h
libavcodec/vda.c
libavcodec/x86/rv40dsp.asm
libavfilter/vf_scale.c
libavformat/nutdec.c
libavutil/mem.c
tests/ref/acodec/pcm_s24daud
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some files contain a few additional, all-0 bits.
Check for that case and don't print incorrect "not supported"
message.
Fixes trac issue #836.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Quite often, the original weights are multiple of 512. By prescaling them
by 1/512 when they are computed (once per frame), no intermediate shifting
is needed, and no prescaling on each call either.
The x86 code already used that trick.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
avconv: use default alignment for audio buffer
avcodec: use align == 0 for default alignment in avcodec_fill_audio_frame()
avutil: use align == 0 for default alignment in audio sample buffer functions
avutil: allow NULL linesize in av_samples_fill_arrays() and av_samples_alloc()
avconv: remove OutputStream.picref.
avconv: only set SAR once on the decoded frame.
avcodec: validate the channel layout vs. channel count for decoders
audioconvert: make av_get_channel_layout accept composite names.
avutil: add av_get_packed_sample_fmt() and av_get_planar_sample_fmt()
Conflicts:
doc/APIchanges
ffmpeg.c
libavcodec/utils.c
libavcodec/version.h
libavutil/audioconvert.c
libavutil/audioconvert.h
libavutil/avutil.h
libavutil/samplefmt.c
libavutil/samplefmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Resolution changes are usually only used to scale with
network bandwidth, the (full) resolution specified in the
RM header really is authoritative.
While I am not sure this is the best solution, it is a
conservative approach that still should fix the most
common cases.
In particular, it fixes aspect with the sample from trac
issue #785 (in MPlayer, ffplay seems to just ignore
sample aspect changes in mid-playback).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
When decoding LATM, this function will not process extradata
but a different buffer.
It seems this was forgotten to update when LATM support
was added.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
rtsp: Don't use av_malloc(0) if there are no streams
rtsp: Don't use uninitialized data if there are no streams
vaapi: mpeg2: fix slice_vertical_position calculation.
hwaccel: mpeg2: decode first field, if requested.
cosmetics: Fix indentation
rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This uses the same code as in decode_video also in decode_audio.
Should fix valgrind FATE failures for nellymoser encode test.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
VASliceParameterBufferMPEG2.slice_vertical_position shall express
the slice vertical position from the original bitstream. The HW
decoder will correctly decode to the right line computed from the
appropriate top_field_first and is_first_field flags.
This patch aligns with DXVA's definition, which is what most HW and
drivers expect. In particular, Intel PowerVR (Cedarview et al.) and
NVIDIA (through VA-to-VDPAU layer). Since it looks more complex to fix
binary drivers, I aligned the Intel Gen driver (Sandy Bridge et al.)
to this behaviour, while maintaining compatibility with codec layers
not providing this patch yet.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
If user opted to present fields as they come, then the first field
picture needs to be submitted to the HW for decoding. In particular,
this fixes MPEG-2 decoding of interlaced streams.
Tested on Intel Cedar Trail, Sandy Bridge and Ivy Bridge platforms.
Someone reported on the ffmpeg-devel@ list this also works on DXVA
(Windows) and other Linux platforms (NVIDIA, through the VA wrapper).
This also means a similar patch to non-hwaccel VDPAU may be necessary.
Note: I believe the SLICE_FLAG_ALLOW_FIELD is useless since the first
field shall always be submitted to the HW anyway. Nobody uses HW accels
(dxva, vaapi, vdpau, etc.) without that flag though.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
asfdec: Add an option for not searching for the packet markers
cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
cosmetics: Align codec declarations
cosmetics: Convert mimic.c to utf-8
avconv: remove an unused function parameter.
avconv: remove now pointless variables.
avconv: drop support for building without libavfilter.
nellymoserenc: fix crash due to memsetting the wrong area.
libavformat: Only require first packet to be known for audio/video streams
avplay: Don't try to scale timestamps if the tb isn't set
Conflicts:
Changelog
configure
ffmpeg.c
libavcodec/aacenc.c
libavcodec/bmpenc.c
libavcodec/dnxhddec.c
libavcodec/dnxhdenc.c
libavcodec/ffv1.c
libavcodec/flacenc.c
libavcodec/fraps.c
libavcodec/huffyuv.c
libavcodec/libopenjpegdec.c
libavcodec/mpeg12enc.c
libavcodec/mpeg4videodec.c
libavcodec/pamenc.c
libavcodec/pgssubdec.c
libavcodec/pngenc.c
libavcodec/qtrleenc.c
libavcodec/rawdec.c
libavcodec/sgienc.c
libavcodec/tiffenc.c
libavcodec/v210dec.c
libavcodec/wmv2dec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is slightly proprietary.
DVDs use a format of
code byte (0x00, 0x01, 0xfe or 0xff), two data bytes
MOV uses instead
cdat/cdt2 atom, two data bytes
Auto-detecting and supporting both in one decoder is trivial,
so a single codec ID is used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Do not pointlessly call ff_alloc_packet2 multiple times,
and fix an infinite loop by clamping the maximum
number of bits to target in the algorithm that does
not use lambda.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
