This prevents decoding happening on a half initialized context.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This prevents some variables from being changed in case of a
rejected resolution change.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
lf_delta.ref[i] and lf_delta.mode[i] were incorrectly reset to 0 if
specific delta value was not updated. Fixed to keep the previous value
if flag indicates that element in question is not updated.
Signed-off-by: Janne Salonen <jsalonen@google.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
rv34: error out on size changes with frame threading
aacsbr: Add a debug check to sbr_mapping.
aac: Reset some state variables when turning SBR off
aac: Reset PS parameters on header decode failure.
fate: add wmalossless test.
aacsbr: handle m_max values smaller than 4.
Conflicts:
libavcodec/aacsbr.c
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes following strange output:
DEV D libopenjpeg OpenJPEG based JPEG 2000 encoder
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Our decoder does not support changing w/h.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes race conditions that ultimately lead to memory corruption.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure the reset flag gets set when SBR gets turned back on
and sets control variables for unguided mode back to their defaults.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
If the next header frame codes zero envelopes the previous frame's
values will be used. Consequently the invalid values must be cleared.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
rv34: Handle only complete frames in frame-mt.
MPV: set reference frame pointers to NULL when allocation of dummy pictures fails
configure: die if x11grab dependencies are unavailable
zerocodec: factorize loop
avconv: fix the resampling safety factors for output audio buffer allocation
avconv: move audio output buffer allocation to a separate function
avconv: make the async buffer global and free it in exit_program()
Conflicts:
ffmpeg.c
libavcodec/mpegvideo.c
libavcodec/rv34.c
libavcodec/zerocodec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prevents a signflip in the counter, and a subsequent crash because of
overreads/overwrites.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
They were moved into code under HAVE_YASM and most of them
even into completely disabled code with no reason given
for that in the commit message.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Correct handling of errors to prevent hags or crashes is very complex
otherwise.
The frame initializing is also moved from decode_slice() to
decode_frame() for clarity.
* qatar/master:
xwma: Validate channels and bits_per_coded_sample.
mov: Do not read past the end of the ctts_data table.
mov: Add missing terminator to mov_ch_layout_map_1ch.
asf: reset side data elements on packet copy.
wmavoice: fix stack overread.
wmalossless: error out if a subframe is not used by any channel.
vqa: check palette chunk size before reading data.
wmalossless: reset sample pointer for each subframe.
wmalossless: error out on invalid values for order.
Conflicts:
libavcodec/vqavideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: Add ZeroCodec test
oggparseogm: fix order of arguments of avpriv_set_pts_info().
pngenc: better upper bound for encoded frame size.
aiffdec: set block_duration to 1 for PCM codecs that are supported in AIFF-C
aiffdec: factor out handling of integer PCM for AIFF-C and plain AIFF
aiffdec: use av_get_audio_frame_duration() to set block_duration for AIFF-C
aiffdec: do not set bit rate if block duration is unknown
wmall: output packet only if we have decoded some samples
Conflicts:
libavcodec/pngenc.c
tests/fate/lossless-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is currently only handled in the parser code for WMV/ASF style
header, but not the one used in the bytestream format used when
muxed into MPEG-TS as on e.g. BluRay.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The new API allows (optionally and on by default) using a internal buffer to encode, avoiding
the need to allocate large buffers or risking failure on too small buffers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (26 commits)
adxenc: use AVCodec.encode2()
adxenc: Use the AVFrame in ADXContext for coded_frame
indeo4: fix out-of-bounds function call.
configure: Restructure help output.
configure: Internal-only components should not be command-line selectable.
vorbisenc: use AVCodec.encode2()
libvorbis: use AVCodec.encode2()
libopencore-amrnbenc: use AVCodec.encode2()
ra144enc: use AVCodec.encode2()
nellymoserenc: use AVCodec.encode2()
roqaudioenc: use AVCodec.encode2()
libspeex: use AVCodec.encode2()
libvo_amrwbenc: use AVCodec.encode2()
libvo_aacenc: use AVCodec.encode2()
wmaenc: use AVCodec.encode2()
mpegaudioenc: use AVCodec.encode2()
libmp3lame: use AVCodec.encode2()
libgsmenc: use AVCodec.encode2()
libfaac: use AVCodec.encode2()
g726enc: use AVCodec.encode2()
...
Conflicts:
configure
libavcodec/Makefile
libavcodec/ac3enc.c
libavcodec/adxenc.c
libavcodec/libgsm.c
libavcodec/libvorbis.c
libavcodec/vorbisenc.c
libavcodec/wmaenc.c
tests/ref/acodec/g722
tests/ref/lavf/asf
tests/ref/lavf/ffm
tests/ref/lavf/mkv
tests/ref/lavf/mpg
tests/ref/lavf/rm
tests/ref/lavf/ts
tests/ref/seek/lavf_asf
tests/ref/seek/lavf_ffm
tests/ref/seek/lavf_mkv
tests/ref/seek/lavf_mpg
tests/ref/seek/lavf_rm
tests/ref/seek/lavf_ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is even potentially faster in this use-case.
Should fix AAC SBR decoding on machines with SSE but not
SSE2, fixing track issue #1041.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Version from vqa header does not dictate which sound chunks may
appear in file.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is how it is defined in Amiga Developer CD from year 1992 and
is consistent with files created with ADPro.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
avconv: free packet in write_frame() when discarding due to frame number limit
FATE: use +/- flag option syntax for vp8 emu-edge tests
lavf: make av_interleave_packet_per_dts() private.
lavf: deprecate av_read_packet().
oggdec: output correct timestamps for Vorbis
avconv: pass input stream timestamps to audio encoders
lavc: shrink encoded audio packet size after encoding.
xa: set correct bit rate
xa: do not set bit_rate, block_align, or bits_per_coded_sample
xa: fix end-of-file handling
xa: fix timestamp calculation
bink: fix typo in FFALIGN() argument
bink: align plane width to 8 when calculating bundle sizes
doc: pass -Idoc texi2html and texi2pod
doc: texi2pod: add -I flag
movenc: Add a min_frag_duration option
rtsp: Set the default delay to 0.1 s for the RTSP/SDP/RTP demuxers
libavformat: Set the default for the max_delay option to -1
Generate manpages for AV{Format,Codec}Context AVOptions.
doc/avconv: remove entries for AVOptions.
...
Conflicts:
doc/Makefile
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/options.c
libavcodec/vp8.c
libavformat/options.c
tests/fate/demux.mak
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Takes encoder delay into account by comparing first the coded page
duration with the calculated page duration. Handles last packet duration
if needed, also by comparing coded duration with calculated duration.
Also does better handling of timestamp generation for packets in the
first page for streamed ogg files where the start time is not
necessarily zero.
ISC doesn't contain this line, so remove it to
prevent confusion.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (35 commits)
fix space type in Changelog
ZeroCodec Decoder
RealAudio Lossless decoder
rtpenc: Use AVFormatContext.packet_size instead of a private option
url: Document the expected behaviour of url_read
libavformat: Use AVFormatContext.probesize in init_input
docs: Fix a stray reference to tags in the generic doxy on dicts
cosmetics: Align some AVInput/OutputFormat declarations
zmbv: check decompress result
zmbv: correct indentation
adpcm: convert adpcm_thp to bytestream2.
adpcm: convert adpcm_yamaha to bytestream2.
adpcm: convert adpcm_swf to bytestream2.
adpcm: convert adpcm_sbpro to bytestream2.
adpcm: convert adpcm_ct to bytestream2.
adpcm: convert adpcm_ima_amv/smjpeg to bytestream2.
adpcm: convert adpcm_ea_xas to bytestream2.
adpcm: convert adpcm_ea_r1/2/3 to bytestream2.
adpcm: convert ea_maxis_xa to bytestream2.
adpcm: convert adpcm_ea to bytestream2.
...
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/adpcm.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/zerocodec.c
libavcodec/zmbv.c
libavformat/riff.c
libavformat/url.h
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This change avoids accessing the segment map of the previous frame if
segmentation is not enabled for the current frame. The caller of
decode_mb_mode() only calls ff_thread_await_progress() on the reference
segmentation index array if segmentation is enabled, so Chromium's TSAN
will report a race when accessing this data while segmentation is not
enabled.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
An obscure Japanese lossless video codec, originally intended
for use with a remote desktop application.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
An obscure Japanese lossless video codec, originally intended
for use with a remote desktop application.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: make compare() function compatible with POSIX bc
Update Janne's email address.
APIchanges: Replace Subversion revision numbers by Git hashes.
bytestream: Eliminate one level of pointless macro indirection.
xwd: convert to bytestream2.
vqavideo: port to bytestream2 API
Read preset files with suffix .avpreset
prores: allow user to set fixed quantiser
lavf: remove some disabled code.
lavf: only set average frame rate for video.
lavf: remove a pointless check.
avcodec: add XBM encoder
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vqavideo.c
libavformat/img2enc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
resample: allocate a large enough output buffer
fate: fix enc_dec_pcm tests with remote target
wmaenc: remove bit-exact hack
FATE: remove WMA acodec tests
FATE: add WMAv1 and WMAv2 encode/decode tests with fuzzy comparison
FATE: add AC-3 and E-AC-3 encode/decode tests with fuzzy comparison
qtrle: Use bytestream2 functions to prevent buffer overreads.
vqavideo: check malloc return values
x11grab: fix a memory leak exposed by valgrind
threads: fix old frames returned after avcodec_flush_buffers()
MPV: always mark dummy frames as reference
h264: fix deadlocks on incomplete reference frame decoding.
mpeg4: report frame decoding completion at ff_MPV_frame_end().
mimic: don't use self as reference, and report completion at end of decode().
Conflicts:
libavcodec/h264.c
libavcodec/qtrle.c
libavcodec/resample.c
libavcodec/vqavideo.c
libavdevice/x11grab.c
tests/ref/seek/wmav1_asf
tests/ref/seek/wmav2_asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It may have improved cross-platform stability, but wasn't the only place in
the encoder with bitexact issues. It is no longer needed because we have FATE
tests for float encoders using fuzzy comparison.
* qatar/master:
h264: K&R formatting cosmetics
s3tc.h: Add missing #include to fix standalone header compilation.
FATE: add capability for audio encode/decode tests with fuzzy psnr comparison
FATE: allow a tolerance in the size comparison in do_tiny_psnr()
FATE: use absolute difference from a target value in do_tiny_psnr()
FATE: allow tests to set CMP_SHIFT to pass to tiny_psnr
FATE: use $fuzz directly in do_tiny_psnr() instead of passing it around
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Calling avcodec_flush_buffers() and then avcodec_decode_video2() with
a 0-sized packet (to get remaining buffered frames) could incorrectly
return an old frame from before the avcodec_flush_buffers() call. Add
a loop in ff_thread_flush() to zero the got_frame field of each thread
to ensure the old frames will not be returned.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
If the dummy frame are not created from a reference frame they could
be deleted untimely resulting in multithreaded decoder waiting on
the current frame to finish.
Noticed by Ronald S. Bultje in the RV34 decoder with a broken file.
If decoding a second complementary field, and the first was
decoded in our thread, mark decoding of that field as complete.
If decoding fails, mark the decoded field/frame as complete.
Do not allow switching between field modes or field/frame mode
between slices within the same field/frame. Ensure that two
subsequent fields cover top/bottom (rather than top/frame,
bottom/frame or such nonsense situations).
Fixes various deadlocks when decoding samples with errors in
reference frames.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>
Modify the parser initialization so that parsers can
set pict_type themselves. Use this in the mpegvideo parser
so that initial frames are not unconditionally I frames.
I have had this in my tree for several years.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dxa: remove useless code
lavf: don't select an attached picture as default stream for seeking.
avconv: remove pointless checks.
avconv: check for get_filtered_frame() failure.
avconv: remove a pointless check.
swscale: convert hscale() to use named arguments.
x86inc: add *mp named argument support to DEFINE_ARGS.
swscale: convert hscale to cpuflags().
Conflicts:
ffmpeg.c
libswscale/x86/scale.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Progressive images can have only 16 references, error out if there are
more, since the data is almost certainly corrupt, and the invalid value
will lead to random crashes or invalid writes later on.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Interlaced images can have 32 references (16 per field), so limiting the
array size to 16 leads to invalid writes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The safe bitstream reader broke it since the buffer size was specified
in bytes instead of bits.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
CC: libav-stable@libav.org
* qatar/master:
doc/general: update supported devices table.
doc/general: add missing @tab to codecs table.
h264: Fix invalid interlaced/progressive MB combinations for direct mode prediction.
avconv: reindent
avconv: link '-passlogfile' option to libx264 'stats' AVOption.
libx264: add 'stats' private option for setting 2pass stats filename.
libx264: fix help text for slice-max-size option.
http: Clear the auth state on redirects
http: Retry auth if it failed due to being stale
rtsp: Resend new keepalive commands if they used stale auth
rtsp: Retry authentication if failed due to being stale
httpauth: Parse the stale field in digest auth
dxva2_vc1: pass the overlap flag to the decoder
dxva2_vc1: fix decoding of BI frames
FATE: add shorthand to wavpack test
dfa: convert to bytestream2 API
anm decoder: move buffer allocation from decode_init() to decode_frame()
h264: improve parsing of broken AVC SPS
Conflicts:
ffmpeg.c
libavcodec/anm.c
libavcodec/dfa.c
libavcodec/h264.c
libavcodec/h264_direct.c
libavcodec/h264_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This bug might have been exploitable (out of HEAP buffer writes)
Bug introduced by libav
commit a55d5bdc6e
Date: Tue Mar 6 15:15:42 2012 -0800
algmm: convert to bytestream2 API.
* qatar/master:
pcm-mpeg: convert to bytestream2 API
Revert "h264: clear trailing bits in partially parsed NAL units"
remove iwmmxt optimizations
mimic: do not continue if swap_buf_size is 0
mimic: convert to bytestream2 API
frwu: use MKTAG to check marker instead of AV_RL32
txd: port to bytestream2 API
c93: convert to bytestream2 API
iff: make .long_name more descriptive
FATE: add test for cdxl demuxer
rtsp: Fix a typo
Conflicts:
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/dsputil_iwmmxt_rnd_template.c
libavcodec/arm/mpegvideo_iwmmxt.c
libavcodec/c93.c
libavcodec/txd.c
libavutil/arm/cpu.c
tests/fate/demux.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Parsing the entire NAL as SPS fixes decoding of some AVC bitstreams
with broken escaping. Since the size of the NAL unit is known and
checked against the buffer end we can parse it entirely without buffer
overreads.
Fixes playback of
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This reverts commit 729ebb2f18.
There was an off-by-one error in the bit mask calculation clearing
actually the last valid bit and causing
http://bugzilla.libav.org/show_bug.cgi?id=227
The broken sample (Mr_MrsSmith-h264_aac.mp4) the commit was fixing
does not work after correcting the off-by-one error.
CC: libav-stable@libav.org
The were broken since August of 2010 without anyone noticing until
three weeks ago. Nobody cares about it anymore and hopefully Marvell
will support NEON like in the PXA978 from now on.
Yasm creates an implicit unaligned text section if "struc" is used
outside of any section:
http://tortall.lighthouseapp.com/projects/78676-yasm/tickets/247
Since yasm only honors the "align" annotation on the first declaration
of a section, this implicit text section causes all text section
alignments to be ignored. Also fixes a yasm warning about it agnoring
alignment.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cook: expand dither_tab[], and make sure indexes into it don't overflow.
xxan: reindent xan_unpack_luma().
xxan: protect against chroma LUT overreads.
xxan: convert to bytestream2 API.
xxan: don't read before start of buffer in av_memcpy_backptr().
vp8: convert mbedge loopfilter x86 assembly to use named arguments.
vp8: convert inner loopfilter x86 assembly to use named arguments.
Conflicts:
libavcodec/xxan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
MPC8 allows indices of mpc_CC up to -1, and mpc_SCF up to -6, thus pad
the tables by that much on the left end.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The two samples both have stype 0.
Without this extra check, the code breaks 4:2:2 dvsd
(stype 4), since that has the same resolution.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
Fix a bunch of common typos.
build: Skip compiling xvmc.h under the correct condition.
configure: darwin: Change dylib install names to include major version.
mpegts: Always honor a registration descriptor if present and there is no other codec information.
aacdec: Fix SCE parity check.
aacdec: Fix out of array writes (stack).
rtsp: Only set the ttl parameter if the server actually gave a value
udp: Set ttl for read-write streams, too, not only for write-only ones
udp: Only bind to the multicast address if in read-only mode
udp: Clarify the comment about binding the multicast address
udp: Reorder comments
Conflicts:
libavcodec/aacdec.c
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
An unpaired SCE preceding a CPE only makes sense for front SCEs
preceding the first CPE.
Split from FFmpeg commit a8d67efa53
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Set the element to channel vector (e2c_vec) size to be the maximum
number of aac channel elements. This makes it slightly larger than it
needs to be because CCEs are never mapped to output channel locations.
Also add a check that all input tags (legal or not) will fit.
Split from FFmpeg commit a8d67efa53
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Fixes trac #1045.
Thanks to Peter Ross for his help with this patch.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Matroska demuxer needs to recreate tta header, so just display
crc error without aborting.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This fixes some invalid memory access caused later in the function
by res_chan[] not being set for all channels. This happens when a
channel doesn't appear a submap. This change simply returns a
decoder error when this situation is detected.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
We slightly overread the input buffer, so we require
padding at the end of the buffer, as is documented in the
get_bits API. Without padding, we'll read uninitialized
data or beyond the end of the .rodata, which may crash.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (29 commits)
sbrdsp.asm: convert all instructions to float/SSE ones.
dv: cosmetics.
dv: check buffer size before reading profile.
Revert "AAC SBR: group some writes."
udp: Print an error message if bind fails
cook: extend channel uncoupling tables so the full bit range is covered.
roqvideo: cosmetics.
roqvideo: convert to bytestream2 API.
dca: don't use av_clip_uintp2().
wmall: fix build with -DDEBUG enabled.
smc: port to bytestream2 API.
AAC SBR: group some writes.
dsputil: remove shift parameter from scalarproduct_int16
SBR DSP: unroll sum_square
rv34: remove dead code in intra availability check
rv34: clean a bit availability checks.
v4l2: update documentation
tgq: convert to bytestream2 API.
parser: remove forward declaration of MpegEncContext
dca: prevent accessing static arrays with invalid indexes.
...
Conflicts:
doc/indevs.texi
libavcodec/Makefile
libavcodec/dca.c
libavcodec/dvdata.c
libavcodec/eatgq.c
libavcodec/mmvideo.c
libavcodec/roqvideodec.c
libavcodec/smc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The codec would keep returning the last decoded frame if the stream
contains B-frames, since it wouldn't clear that frame from the list of
frames to be returned to the user.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Since the values are floats, using the float operations
makes sense, improves performance on some CPUs and
makes the code SSE compatible instead of needing SSE2.
Based on suggestion by Jason.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
There is only one caller, which does not need the shifting. Other use cases
are situations where different roundings would be needed.
The x86 and neon versions are modified accordingly.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The length is even, so some unrolling can be performed. Timings are for x86:
- 32bits: 102c -> 82c
- 64bits: 82c -> 69c
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This was an incorrect copy-and-paste to a code not needing the original code.
Spotted by Jason in a previous review but forgotten in the commit.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
movq from SSE register _to_ memory is an SSE2 instruction.
Use the SSE movlps function instead that does the same thing.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This fixes an issue in the code to check the size that will
be written to match the actual code writing. In the long
term it would make sense to change this so the counting and
writing code are the same so they dont need to be kept in sync.
It also increases the array size, which was too small either way
and adds a redudnant saftey check.
This issue does not affect any FFmpeg release as it has been
introduced Jan 31 which is narrowly after our last release.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Results of IDCT can by far outreach the range of ff_cropTbl[], leading
to overreads and potentially crashes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This fixes some arith decoder overreads and a potential infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (31 commits)
cdxl demux: do not create packets with uninitialized data at EOF.
Replace computations of remaining bits with calls to get_bits_left().
amrnb/amrwb: Remove get_bits usage.
cosmetics: reindent
avformat: do not require a pixel/sample format if there is no decoder
avformat: do not fill-in audio packet duration in compute_pkt_fields()
lavf: Use av_get_audio_frame_duration() in get_audio_frame_size()
dca_parser: parse the sample rate and frame durations
libspeexdec: do not set AVCodecContext.frame_size
libopencore-amr: do not set AVCodecContext.frame_size
alsdec: do not set AVCodecContext.frame_size
siff: do not set AVCodecContext.frame_size
amr demuxer: do not set AVCodecContext.frame_size.
aiffdec: do not set AVCodecContext.frame_size
mov: do not set AVCodecContext.frame_size
ape: do not set AVCodecContext.frame_size.
rdt: remove workaround for infinite loop with aac
avformat: do not require frame_size in avformat_find_stream_info() for CELT
avformat: do not require frame_size in avformat_find_stream_info() for MP1/2/3
avformat: do not require frame_size in avformat_find_stream_info() for AAC
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/h264_ps.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
All colorspaces are supported.
Renamed libutvideo.cpp to libutvideodec.cpp.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is so the forthcoming encoder wrapper can share
them.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This only returns bits per sample when it is exactly correct. That is, the
codec contains only raw samples with no frame headers or padding. This applies
to basically all PCM codecs and a small subset of ADPCM codecs.
This condition cannot happen, if it can it is a bug that MUST be fixed.
And i very happily volunteer to fix it if someone reports a case to
me that fails.
This reverts commit 5d652e063b.
This splits ff_dsputil_init_mmx() into multiple functions, one for
each MMX/SSE level, somewhat simplifying the nested conditions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This fixes some global out of array reads and wrong cliping.
No speed difference meassurable under clang on i5
also all important code paths on all important platforms should
use SIMD.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a out of global array read in the cplscale* tables.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
cmdutils: use new avcodec_is_decoder/encoder() functions.
lavc: make codec_is_decoder/encoder() public.
lavc: deprecate AVCodecContext.sub_id.
libcdio: add a forgotten AVClass to the private context.
swscale: remove "cpu flags" from -sws_flags description.
proresenc: give user a possibility to alter some encoding parameters
vorbisenc: add output buffer overwrite protection
libopencore-amrnbenc: fix end-of-stream handling
ra144enc: fix end-of-stream handling
nellymoserenc: zero any leftover packet bytes
nellymoserenc: use proper MDCT overlap delay
qpeg: Use bytestream2 functions to prevent buffer overreads.
swscale: make %rep unconditional.
vp8: convert simple loopfilter x86 assembly to use named arguments.
vp8: convert idct x86 assembly to use named arguments.
vp8: convert mc x86 assembly to use named arguments.
vp8: convert loopfilter x86 assembly to use cpuflags().
vp8: convert idct/mc x86 assembly to use cpuflags().
swscale: remove now unnecessary hack.
x86inc: don't "bake" stack_offset in named arguments.
...
Conflicts:
cmdutils.c
doc/APIchanges
libavcodec/mpeg12.c
libavcodec/options.c
libavcodec/qpeg.c
libavcodec/utils.c
libavcodec/version.h
libavdevice/libcdio.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In most places where it's used, it's as a pointless write-only field.
Only rv10 decoder actually reads from it, but it stores some internal
version info in it. There is no reason for it to be in a public field.
Use CODEC_CAP_DELAY and CODEC_CAP_SMALL_LAST_FRAME to properly pad and flush
the encoder at the end of encoding. This is needed in order to have all input
samples decoded.
Use CODEC_CAP_DELAY and CODEC_CAP_SMALL_LAST_FRAME to properly pad and flush
the encoder at the end of encoding. This is needed in order to have all input
samples decoded.
