* commit '955aec3c7c7be39b659197e1ec379a09f2b7c41c':
mpegaudiodecheader: check the header in avpriv_mpegaudio_decode_header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '6bf4c1d71199b92894f24db6386ed5070e590a16':
r3d: do not create the audio stream until we know the sample rate
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9f1eccb97bf8894cb18b14f642500686505ef186':
ff_parse_specific_params: do not use AVCodecContext.frame_size
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
support reading encrypted mp4 using aes-ctr, conforming to ISO/IEC
23001-7.
a new parameter was added:
- decryption_key - 128 bit decryption key (hex)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes crashes caused by out-of-bounds writes.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This commit for qtpalette.c and qtpalette.h adds 1-bit video to the
"palettized video" category, since if the video sample description
contains a palette, the two colors in the palette can be any color, not
necessarily black & white.
Unfortunately, I've noticed that the qtrle (QuickTime Animation) decoder
blindly assumes that 1-bit video is black & white. I don't have enough
knowledge about the decoder to fix this, though.
Below is a link to a sample 1-bit QuickTime Animation clip of a rotating
earth that uses blueish colors, and they will be correctly rendered in
QuickTime, but not in FFmpeg (which will use black & white).
https://drive.google.com/open?id=0B3_pEBoLs0faUlItWm9KaGJSTEE
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This solves the problem discussed in https://ffmpeg.org/pipermail/ffmpeg-devel/2015-September/179238.html
by allowing AVCodec::write_header to be delayed until after packets have been
run through required bitstream filters in order to generate global extradata.
It also provides a mechanism by which a muxer can add a bitstream filter to a
stream automatically, rather than prompting the user to do so.
Palettized QuickTime video in Matroska has hitherto not been recognized
whatsoever, and the "palette" used has been completely random.
The patch for matroskadec.c fixes this issue by adding a palette side
data packet in matroska_deliver_packet(), much in the same way as it's
done in mov.c.
Video samples for testing are available at
https://drive.google.com/open?id=0B3_pEBoLs0faWElmM2FnLTZYNlk.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This consists mainly of moving the palette handling from
the mov_parse_stsd_video() function to a new ff_get_qtpalette() function
in the new file qtpalette.c, which will be shared by both matroskadec.c and
mov.c.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previous "currently size is limited" didn't give away
much in terms of useful info.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
So far an AC-3 elementary stream is refered to in the PMT according to
System A (ATSC). An E-AC-3 ES in contrast is embedded the System B (DVB) way.
To fix this inconsistency, this commit changes the default E-AC-3 behaviour to
use the ATSC way, too. Furthermore a new flag is added to optionally select the
DVB way (regarding both codecs and possible further differences in the future).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes a specific srt sample, which has an event with negative duration.
libavcodec will convert an event with negative duration to an ASS event
which will be displayed forever, which is not wanted here.
Treat negative duration always as unknown duration instead, and show it
until the next subtitle event.
A negative bits_per_coded_sample doesn't make sense.
If it is too large, the size calculation for av_get_packet overflows,
resulting in allocation of a too small buffer.
Also make sure width and height are sane.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes NULL pointer dereferencing.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If it is negative, it can cause the byte position to move backwards in
avio_skip, which in turn makes sm_size negative and thus size larger
than the size of the packet buffer, causing invalid writes in avio_read.
Also fix potential overflow of avio_tell(bc) + value_len.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes ubsan runtime error: null pointer passed as argument 2, which is
declared to never be null
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Since the parser was merged back almost 2 months ago this is the first
time the bitstream of the container has been updated.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
* commit 'e02de9df4b218bd6e1e927b67fd4075741545688':
lavc: export Dirac parsing API used by the ogg demuxer as public
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
A negative codec_id cannot be handled by the found_decoder API of
AVStream->info: if the codec_id is not recognized, found_decoder is set
to -codec_id, which has to be '<0' according to the API documentation.
This can cause NULL pointer dereferencing in try_decode_frame.
Also make sure the codec_type matches the expected one for codec_id.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
support writing encrypted mp4 using aes-ctr, conforming to ISO/IEC
23001-7.
3 new parameters were added:
- encryption_scheme - allowed values are none (default) and cenc-aes-ctr
- encryption_key - 128 bit encryption key (hex)
- encryption_kid - 128 bit encryption key identifier (hex)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
So far an AC-3 elementary stream is refered to in the PMT according to
System A (ATSC). However System B (DVB) has a different way to signal an AC-3
ES within the PMT. This different way can be enabled by a new flag. The flag is
more generally named 'system_b' as there are further differences between ATSC
and DVB (e.g. the signalling of E-AC-3) which should then also be covered by it
in the future.
Bug-Id: 73
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Similar to 33fefdb44.
Fix trac ticket #4921.
Signed-off-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The current muxer behaviour is to create streams in read_header() based
on the audio/video presence flags, but fill in the stream parameters
later when we actually get some packets for them. This is rather shady,
since other demuxers set the stream parameters immediately when the
stream is created and do not touch the stream codec context after that.
Change the flv demuxer to behave in the same way as other similar
demuxers -- create the streams only when we get a packet for them.
Almost all the places from which this function is called already check
the header manually and in the two that don't (the mp3 muxer) the check
should not cause any problems.
It will not be set unless the muxing codec context is also the encoding
context, which is discouraged. When the frame size is not known from
av_get_audio_frame_duration(), the fallback should still be good enough.
It will not be set if the stream codec context is not the encoding
context. Use av_get_audio_frame_duration() instead, it should work for
all audio codecs supported by the muxer.
* commit '5f3a081b42b84404a40a52c80ef7a354cf048c56':
avi: Spin out the logic to position to the next non-interleaved stream
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
matroskaenc applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit 'a0fa6d06b848f26b16ba12f0a9a4a85b93ab8022':
matroska: Warn when metadata references a non-existent element
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
It is required to call va_end for each invocation of va_start within the
same function.
Fixes: CID 1341583.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Checking the codec context parameters to find out this information is
far too unreliable to be useful, so it is safer to assume B-frames are
always present.
QuickTime metadata can come after trak data. Add indicator for which trak is being parsed (-1 if none) so that global metadata after the trak can be parsed.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If size is zero, avio_get_str fails, leaving the buffer uninitialized.
This causes invalid reads in av_set_options_string.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Otherwise the ffm demuxer can return the same packets endlessly, if
there is no server attached.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
ts->mux_rate is int (signed 32-bit) type. The period calculations
will start to overflow when mux_rate > 5mbps. This fixes overflows
by converting first to 64-bit type.
Fixes#5044.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This code is disabled by default so not to regress endpoints sending invalid MIME, but can be enabled via AVOption 'strict_mime_boundary'
Signed-off-by: Alex Agranovsky <alex@sighthound.com>
matroskaenc.c applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec.c
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
"Fast seek" uses linear interpolation to find the position of the
requested seek time. For CBR this is more direct than using the
mp3 TOC and bypassing the TOC avoids problems with TOC precision.
(see https://crbug.com/545914#c13)
For VBR, fast seek is not precise, so continue to prefer the TOC
when available (the lesser of two evils).
Also, some re-ordering of the logic in mp3_seek to simplify and
give usetoc=1 precedence over fastseek flag.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
* commit '12b14382861fbf19378afcddaa19cd9a949a86a3':
udp: Provide additional information on getaddrinfo failure
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8375dc1dd101d51baa430f34c0bcadfa37873896':
asfdec: handle the case when the stream index has an invalid value better
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fixes probing of truehd/mlp files with a lot of frames in between the
major sync frames. The spec allows a distance of up to 128 frames in
between major sync frames, which leads to the probing code not reaching
the desired score.
Avoid decoding a frame to get the codec parameters while the codec
supports FF_CODEC_CAP_SKIP_FRAME_FILL_PARAM. This is particulary useful
to avoid decoding twice images (once in avformat_find_stream_info and
once when the actual decode is made).
If duration is still AV_NOPTS_VALUE when opening the next file, we can assume
that outpoint is not set.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
