The function documentation explicitly mentions it needs to be a multiple of 4.
Reviewed-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '50078c1c8070dd8d1c329e8117ff30ec72489039':
libavutil: move FFALIGN macro from common.h to macros.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fast, reasonably accurate 10^x. Alternative of detection of libm exp10 at configure
time is not worth the trouble, since it is anyway not POSIX or ISO C,
and currently only the GNU libm has it. Furthermore, GNU libm's variant
is ~ 2x slower, and is ironically not correctly rounded (2 ulp off) to justify all
that slowdown.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Addition of comments marking the end of ifdef blocks, correction of an
incorrect (at double precision) M_LN2, removal of an unnecessary undef.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
exp10 is a function available in GNU libm. Looks like no other common
libm has it. This adds support for it to FFmpeg.
There are essentially 2 ways of handling the fallback:
1. Using pow(10, x)
2. Using exp2(M_LOG2_10 * x).
First one represents a Pareto improvement, with no speed or accuracy
regression anywhere, but speed improvement limited to GNU libm.
Second one represents a slight accuracy loss (relative error ~ 1e-13)
for non GNU libm. Speedup of > 2x is obtained on non GNU libm platforms,
~30% on GNU libm. These are "average case numbers", another benefit is
the lack of triggering of the well-known terrible worst case paths
through pow.
Based on reviews, second one chosen. Comment added accordingly.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Source code is from Boost:
http://www.boost.org/doc/libs/1_46_1/boost/math/special_functions/erf.hpp
with appropriate modifications for FFmpeg.
Tested on interval -6 to 6 (beyond which it saturates), +/-NAN, +/-INFINITY
under -fsanitize=undefined on clang to test for possible undefined behavior.
This function turns out to actually be essentially as accurate and faster than the
libm (GNU/BSD's/Mac OS X), and I can think of 3 reasons why upstream
does not use this:
1. They are not aware of it.
2. They are concerned about licensing - this applies especially to GNU
libm.
3. They do not know and/or appreciate the benefits of rational
approximations over polynomial approximations. Boost uses them to great
effect, see e.g swr/resample for bessel derived from them, which is also
similarly superior to libm variants.
First, performance.
sample benchmark (clang -O3, Haswell, GNU/Linux):
3e8 values evenly spaced from 0 to 6
time (libm):
./test 13.39s user 0.00s system 100% cpu 13.376 total
time (boost based):
./test 9.20s user 0.00s system 100% cpu 9.190 total
Second, accuracy.
1e8 eval pts from 0 to 6
maxdiff (absolute): 2.2204460492503131e-16
occuring at point where libm erf is correctly rounded, this is not.
Illustration of superior rounding of this function:
arg : 0.83999999999999997
erf : 0.76514271145499457
boost : 0.76514271145499446
real : 0.76514271145499446
i.e libm is actually incorrectly rounded. Note that this is clear from:
https://github.com/JuliaLang/openlibm/blob/master/src/s_erf.c (the Sun
implementation used by both BSD and GNU libm's), where only 1 ulp is
guaranteed.
Reasons it is not easy/worthwhile to create a "correctly rounded"
variant of this function (i.e 0.5ulp):
1. Upstream libm's don't do it anyway, so we can't guarantee this unless
we force this implementation on all platforms. This is not easy, as the
linker would complain unless measures are taken.
2. Nothing in FFmpeg cares or can care about such things, due to the
above and FFmpeg's nature.
3. Creating a correctly rounded function will in practice need some use of long
double/fma. long double, although C89/C90, unfortunately has problems on
ppc. This needs fixing of toolchain flags/configure. In any case this
will be slower for miniscule gain.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
For systems with broken libms.
Tested with NAN, -NAN, INFINITY, -INFINITY, +/-x for regular double x and
combinations of these.
Old versions of MSVC need some UINT64_C hackery.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This should be useful for the sofalizer filter.
Reviewed-by: Kieran Kunhya <kierank@ob-encoder.com>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
arc4random() was designed as a superior interface for system random
number generation, designed for OpenBSD and subsequently incorporated by
other BSD's, Mac OS X, and some non-standard libc's. It is thus an improvement to
use it whenever available.
As a side note, this may or may not get included in glibc, and there is
a proposal to create a posix_random family based on these ideas:
http://austingroupbugs.net/view.php?id=859.
Tested on Mac OS X.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
These postfixes can be computed statically, and there is no need to
waste runtime resources.
Tested with FATE.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The vector mode was deprecated in ARMv7-A/VFPv3 and various cpu
implementations do not support it in hardware. Vector mode code will
depending the OS either be emulated in software or result in an illegal
instruction on cpus which does not support it. This was not really
problem in practice since NEON implementations of the same functions are
preferred. It will however become a problem for checkasm which tests
every cpu flag separately.
Since this is a cpu feature newer cpu do not support anymore the
behaviour of this flag differs from the other flags. It can be only
activated by runtime cpu feature selection.
The ISB (instruction synchronization barrier) might be too heavy for
START/STOPTIMER use but should be more accurate in checkasm where the
timing overhead is subtracted.
Include macros.h explicitly in common.h so that external code using
FFALIGN does not break. It was already implicitly included through
version.h. Include macros.h in lls.h and internal.h for FFALIGN.
lls.h was including common.h only for FFALIGN and internal.h was
missing the include for FFALIGN. `make checkheaders` did not catch it
because it's an internal header.
Fix a dead lock under certain conditions. Let's assume we have a queue of 1
message max, 2 senders, and 1 receiver.
Scenario (real record obtained with debug added):
[...]
SENDER #0: acquired lock
SENDER #0: queue is full, wait
SENDER #1: acquired lock
SENDER #1: queue is full, wait
RECEIVER: acquired lock
RECEIVER: reading a msg from the queue
RECEIVER: signal the cond
RECEIVER: acquired lock
RECEIVER: queue is empty, wait
SENDER #0: writing a msg the queue
SENDER #0: signal the cond
SENDER #0: acquired lock
SENDER #0: queue is full, wait
SENDER #1: queue is full, wait
Translated:
- initially the queue contains 1/1 message with 2 senders blocking on
it, waiting to push another message.
- Meanwhile the receiver is obtaining the lock, read the message,
signal & release the lock. For some reason it is able to acquire the
lock again before the signal wakes up one of the sender. Since it
just emptied the queue, the reader waits for the queue to fill up
again.
- The signal finally reaches one of the sender, which writes a message
and then signal the condition. Unfortunately, instead of waking up
the reader, it actually wakes up the other worker (signal = notify
the condition just for 1 waiter), who can't push another message in
the queue because it's full.
- Meanwhile, the receiver is still waiting. Deadlock.
This scenario can be triggered with for example:
tests/api/api-threadmessage-test 1 2 100 100 1 1000 1000
One working solution is to make av_thread_message_queue_{send,recv}()
call pthread_cond_broadcast() instead of pthread_cond_signal() so both
senders and receivers are unlocked when work is done (be it reading or
writing).
This second solution replaces the condition with two: one to notify the
senders, and one to notify the receivers. This prevents senders from
notifying other senders instead of a reader, and the other way around.
It also avoid broadcasting to everyone like the first solution, and is,
as a result in theory more optimized.
Pretty standard macros, these should help libav*
users avoid repeating ver.si.on parsing code,
which aids in compatibility-checking tasks like
identifying FFmpeg from Libav (_MICRO >= 100 check).
Something many are doing since we are not
intercompatible anymore.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
The fps variable is explicitly set to -1 in case of some errors, the check must
thus be signed or the code setting it needs to use 0 as error code
the type of the field could be changed as well but its in an installed header
Fixes: integer overflow
Fixes: 9982cc157b1ea90429435640a989122f/asan_generic_3ad004a_3799_22cf198d9cd09928e2d9ad250474fa58.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There was no reason AFAIK for making AV_CRC_24_IEEE 12. This simply
resulted in wasted space under --enable-hardcoded-tables:
dynamic: 1318672 libavutil/libavutil.so.55
old : 1330680 libavutil/libavutil.so.55
new : 1326488 libavutil/libavutil.so.55
Minor version number is bumped, with ifdefry due to API breakage.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is useful for build-time table generation (--enable-hardcoded-tables),
by providing compat shims for hosts that have broken libms.
This file is deliberately kept minimal; functions can always be added on
an as-needed basis.
Reviewed-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The code expects actual positive numbers and gives completely wrong
results if INT64_MIN is treated as positive
Instead clip it into the valid range that is add 1 and treat it as
negative
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is a trivial rewrite of the loops that results in better
prefetching and associated cache efficiency. Essentially, the problem is
that modern prefetching logic is based on finite state Markov memory, a reasonable
assumption that is used elsewhere in CPU's in for instance branch
predictors.
Surrounding loops all iterate forward through the array, making the
predictor think of prefetching in the forward direction, but the
intermediate loop is unnecessarily in the backward direction.
Speedup is nontrivial. Benchmarks obtained by 10^6 iterations within
solve_lls, with START/STOP_TIMER. File is tests/data/fate/flac-16-lpc-cholesky.err.
Hardware: x86-64, Haswell, GNU/Linux.
new:
17291 decicycles in solve_lls, 2096706 runs, 446 skips
17255 decicycles in solve_lls, 4193657 runs, 647 skips
17231 decicycles in solve_lls, 8384997 runs, 3611 skips
17189 decicycles in solve_lls,16771010 runs, 6206 skips
17132 decicycles in solve_lls,33544757 runs, 9675 skips
17092 decicycles in solve_lls,67092404 runs, 16460 skips
17058 decicycles in solve_lls,134188213 runs, 29515 skips
old:
18009 decicycles in solve_lls, 2096665 runs, 487 skips
17805 decicycles in solve_lls, 4193320 runs, 984 skips
17779 decicycles in solve_lls, 8386855 runs, 1753 skips
18289 decicycles in solve_lls,16774280 runs, 2936 skips
18158 decicycles in solve_lls,33548104 runs, 6328 skips
18420 decicycles in solve_lls,67091793 runs, 17071 skips
18310 decicycles in solve_lls,134187219 runs, 30509 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
