* commit '67a2912307c3c08f2725ccae162cfe3426b80184':
movenc: Don't assume that fragment durations in pts is equal to duration in dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c337353a2546416631a87de4881850d99141c39':
movenc: Move sidx edit list timestamp adjustment into a block
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eee13d653953083553cceadbbedf6222ef78a006':
movenc: Only adjust the cts offset at the start of fragments if necessary
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b81b0cc22b22413760423e239ea644c9afdbfa2d':
movenc: Set the last packet duration based on the next packet when autoflushing
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2889c5e16711770437f380f1bead5f72c6a0b17a':
movenc: Heuristically set the duration of the last sample in a fragment if not set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For strict CFR, they should be pretty much equal, but if the stream
is VFR, there can be a sometimes significant difference.
Calculate the pts duration separately, used in sidx atoms and for
tfrf/tfxd boxes in smooth streaming ismv files.
Also make sure to reduce the duration of sidx entries according to
edit lists.
Signed-off-by: Martin Storsjö <martin@martin.st>
Adjusting it is only necessary when a sidx/tfrf/tfxd atom already has
been written for the previous fragment (since the sidx/tfrf/tfxd atoms
include the duration between the first pts of the previous fragment, to
the first pts of the new fragment).
Signed-off-by: Martin Storsjö <martin@martin.st>
When automatically flushing fragments based on set conditions
(fragmentation on keyframes, after some interval or byte size),
we already have the next packet for one stream - use this for setting
the duration of the last packet in the flushed fragment correctly.
This avoids having to adjust the timestamp of the first packet in
the new fragment since the last duration was unknown.
Unfortunately, this only works for automatic flushing (not for
caller-triggered flushing, like in the dash muxer), and only for the
one single track that triggered the flushing. The duration of the
last sample in all other tracks still is dependent on AVPacket
duration (or heuristics).
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if this is a guess, it is way better than writing a zero duration
of the last sample in a fragment (because if the duration is zero,
the first sample of the next fragment will have the same timestamp
as the last sample in the previous one).
Since we normally don't require libavformat muxer users to set
the duration field in AVPacket, we probably can't strictly require
it here either, so don't log this as a strict warning, only as info.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is incompatible with the omit_tfhd_offset flag (writing
position independent fragments with interleaving requires the
default_base_moof flag).
This makes the moof atoms slightly bigger, but can be better for
playback (improving locality of sample data in the mdat).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is needed if all the data for one track isn't continuous
within the mdat. Normally we make sure all the data for one
track is continuous, but in new cases we will need to have
the samples interleaved.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '448c8cfe4c53e9e806effd8505b46d57fa707061':
movenc: Support setting fragment_index before the moov atom is written
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0c5e380c2c266d2e8a13c000cc527529db837f10':
movenc: Don't rely on the fragment index for vc1 info gathering
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way, the caller doesn't need to coordinate setting the option
after the moov atom has been written. The downside is that it is
no longer possible to use the option for checking whether the moov
atom already has been written, but a caller is able to keep track
of that by other means anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
The previous use of the mov->fragments field, for determining whether
written packets were part of the first fragment or not, didn't
work as intended when using the empty_moov flag.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '46d4d8575979a24a8d026d9805039b724e0e3e5f':
movenc: Avoid writing separate flags for the first sample if not necessary
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '00d751d4fc20ec88d2cc2c9f39ec8b9e9c8cdeba':
movenc: Set tfhd default sample flags based on actual samples, if possible
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids assuming that e.g. audio samples are marked as
sync samples.
This allows omitting the sample flags from trun, if the default
flags happen to be right for all the samples.
Signed-off-by: Martin Storsjö <martin@martin.st>
a876585215 had the unintended side effect of returning AVERROR(ENOMEM)
when track->entry is zero, while the code intentionally wants to
continue in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
As this is depricated it should not be on by default, it is only
supported for MOV containers, depends on avpriv_get_gamma_from_trc()
Enable by:
-movflags +write_gama
This will use the color_trc to supply a gamma value, if desired an
explicit value may be supplied using the -mov_gamma option supplying
a suitable floating point value, values <=1e-6 will not be written.
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the copy codec ACLR atoms where incorrectly written
During the creation of the ACLR atom we are assuming the vos_data
contains the DNxHD header. This change makes this explicit and
ensures we don't over write the stream with the extra_data.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Outputting DNxHD into .mov containers 'corrupts' following atoms until end of stsd
ffmpeg and qtdump could not decode pasp/colr atoms in the files made by ffmpeg,
when outputting DNxHD due to the incorrect padding placement. Now we add the
padding in the correct place
Tidy up FATE changes due to padding changes.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Avid prefers mpeg range [16-235] by default this change brings
ffmpeg into line with that. To obtain the old behaviour use
'-color_range jpeg' on the command line prior to the ouput
filename.
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '46808fdf04ab113df374157b90b506eb3110daf2':
movenc: Enable editlists by default if delay_moov is enabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b3b0b35db2f3b61bf2f0f4fa85f5b6267d83c8fe':
movenc: Get rid of a hack for updating the dvc1 atom
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '847bf5988fec1d3e65c1d8cf0cdb8caf0cfd0c1b':
movenc: Add an option for delaying writing the moov with empty_moov
Conflicts:
libavformat/movenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c725faebda9a516766d94c33b07972ab0f70cf93':
movenc: Use start_dts/cts instead of cluster[0] for writing edit lists
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '724cbea7193945fe5a5b4dea8ede344803572844':
movenc: Remove an unnecessary condition when flushing fragments
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '355d01a1bf55297b1d1f04e4bfbf0ddc93b6247e':
movenc: Factorize writing ftyp and other identification tags to a separate function
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use the more generic approach with the delay_moov flag, instead of
having a update mechanism specific to this one single atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
This delays writing the moov until the first fragment is written,
or can be flushed by the caller explicitly when wanted. If the first
sample in all streams is available at this point, we can write
a proper editlist at this point, allowing streams to start at
something else than dts=0. For AC3 and DNXHD, a packet is
needed in order to write the moov header properly.
This isn't added to the normal behaviour for empty_moov, since
the behaviour that ftyp+moov is written during avformat_write_header
would be changed. Callers that split the output stream into header+segments
(either by flushing manually, with the custom_frag flag set, or by
just differentiating between data written during avformat_write_header
and the rest) will need to be adjusted to take this option into use.
For handling streams that start at something else than dts=0, an
alternative would be to use different kinds of heuristics for
guessing the start dts (using AVCodecContext delay or has_b_frames
together with the frame rate), but this is not reliable and doesn't
necessarily work well with stream copy, and wouldn't work for getting
the right initialization data for AC3 or DNXHD either.
Signed-off-by: Martin Storsjö <martin@martin.st>
If fragments == 0 it means we haven't written any moov atom yet.
If the empty_moov flag is set, we already have written an empty moov
atom at startup. Thus, the check for empty_moov is redundant.
This is in preparation for allowing writing the moov atom later,
even when using the empty moov flag.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '59f0275dd0a42a7f90271a83a78e9ca5e69ff5b0':
movenc: Adjust the pts of new fragments similarly to what is done for dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pts and the corresponding duration is written in sidx
atoms, thus make sure these match up correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '234fb81e3145e9c9aec4ec16266676fab7dc21fa':
movenc: Expose the fragment index as an avoption
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ee37620b6ae4783cda637408422044b2d14a688c':
movenc: Add a flag for indicating a discontinuous fragment
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows setting the right fragment number if doing
random-access writing of fragments, and also allows reading the
current sequence number.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows creating a later mp4 fragment without sequentially
writing the earlier ones before (when called from a segmenter).
Normally when writing a fragmented mp4 file sequentially, the
first timestamps of a fragment are adjusted to match the
end of the previous fragment, to make sure the timestamp is the
same, even if it is calculated as the sum of previous fragment
durations. (And for the first packet in a file, the offset of
the first packet is written using an edit list.)
When writing an individual mp4 fragment discontinuously like this
(with potentially writing the earlier fragments separately later),
there's a risk of getting a gap in the timeline if the duration
field of the last packet in the previous fragment doesn't match up
with the start time of the next fragment.
Using this requires setting -avoid_negative_ts make_non_negative
(or -avoid_negative_ts 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '40ed1cbf147d09fc0894bee160f0b6b6d9159fc5':
movenc: Allow writing a DASH sidx atom at the start of files
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3847f3ab58b3b74604807394247bf68827258103':
movenc: Add tfra entries for all tracks in a moof
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2ded57371abead879bcee56da5131e5fac0d17ef':
movenc: Add support for writing sidx atoms for DASH segments
Conflicts:
Changelog
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d9d6afb8d2f284f5e620ecc19f643d5cd3facb8':
movenc: Factorize adding fragment info into a separate function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f9eb9165bb7d7982fdedf64f6bcec856f1bedd6':
movenc: Include empty tracks in iods when writing fragmented mp4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously only tfra entries were added for the first track in each moof.
The frag_info array used for tfra can also be used for writing
other kinds of fragment indexes, where it's more important to
include all tracks.
When the separate_moof option is enabled (as in ismv), we write
a separate moof for each track, so this doesn't make any difference
in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented streams with an empty initial moov,
we won't have any samples in any tracks when writing the
moov atom, thus trust that any tracks that are added actually
will be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8cb7b7b461b52898765b38e3eff68c0ce88347f3':
movenc: Avoid leaking locally allocated data when returning on errors
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids a potential crash if writing a fragmented psp mp4
(which probably is only a hypothetical scenario).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1d8a0c1b43e58332a3a15c67d4adc161713cade8':
movenc: Allow to request not to use edit lists
Conflicts:
libavformat/movenc.c
See: 537ef8bebf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously we wrote decoding timestamps here, while the specs
say it should be presentation timestamps.
Signed-off-by: Martin Storsjö <martin@martin.st>
When using the new first_trun flag instead of checking the track id,
we don't need to have a special case for the separate_moof flag
any longer.
This simplifies the complicated codepath ever so slightly.
Signed-off-by: Martin Storsjö <martin@martin.st>
In this case, shift tracks to start from zero instead (potentially
stretching the first sample in tracks that start later than the
first one).
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. This results in AV sync errors when
edit lists are used to adjust AV sync.
Some players, such as QuickTime, don't respect the duration for
audio packets, so if an audio track starts later than the video
track and the first audio sample gets a duration longer than the
actual amount of data in it, the result will be out of sync.
Based on patches by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '91e8d2eb1f7bf3af949008b106ec1ca037b88b0e':
lavf: use the format context strict_std_compliance instead of the codec one
Conflicts:
libavformat/mux.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'aae6b3b918b4133b8cc2d1631196c1d406d0351a':
movenc: Don't write any iso brands in ismv files
Merged-by: Michael Niedermayer <michaelni@gmx.at>
