Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
* qatar/master:
hwaccel: fix use with frame based multithreading
Conflicts:
libavcodec/h263dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allows use of AVHWAccel based decoders with frame based multithreading.
The decoders will be forced into an non-concurrent mode by delaying
ff_thread_finish_setup() calls after decoding of the current frame
is finished.
This wastes memory by unnecessarily using multiple threads and thus
copies of the decoder context but allows seamless switching between
hardware accelerated and frame threaded software decoding when the
hardware decoder does not support the stream.
The two types of packets (PCI and DSI) are passed untouched but combined by the new codec ID AV_CODEC_ID_DVD_NAV.
The first 980 bytes in the packet contain the PCI data. The next 1018 are the DSI data.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f099d3d1d5466bd63f4ab36270d169ff9ea613b8':
Add av_log_{ask_for_sample|missing_feature} replacements to libavutil
ismindex: Check the return value of allocations
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit d3edc65dd1, reversing
changes made to 150de78d7c.
Conflicts:
libavcodec/version.h
It seems there are several applications still using it
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f24a3ca999a702f83af9307f9f47b6fdeb546a5':
lavc: remove disabled FF_API_OLD_ENCODE_VIDEO cruft
lavc: remove disabled FF_API_OLD_ENCODE_AUDIO cruft
lavc: remove disabled FF_API_OLD_DECODE_AUDIO cruft
Conflicts:
libavcodec/flacenc.c
libavcodec/libgsm.c
libavcodec/utils.c
libavcodec/version.h
The compatibility wrapers are left as they likely sre still
in wide use. They will be removed when they break or otherwise
cause work without an volunteer being available.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8df23e938b4022d6e6e9e1180ea6418abae74fda':
lavc: postpone the removal of request_channels API.
AVFrame: deprecate all now unused fields
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ca1fe6c0e60808da45d4dfd8728f45e843b9f9b0':
h263: remove an unused parameter from ff_h263_decode_init_vlc
flac: add channel layout masks for streams with 7 or 8 channels.
flac: don't check the number of channels before setting the channel layout.
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '93af2734ee609133eaeca28329d7f13241dd411f':
lavc: put FF_IDCT_{VP3,H264,CAVS,BINK,EA,WMV2} under FF_API_IDCT.
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows us to get rid of them on the next major bump. All of the
above are functionally irrelevant, and most of them are unused, except
the vp3 one, which is used wrongly in the bfin arch optimizations.
* commit '44e065d56c87d6a9d0effccec5f31517f72924ec':
vdpau: Add context and common helpers for hwaccel support
Conflicts:
Changelog
doc/APIchanges
libavcodec/vdpau.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The data does not contain timing or trailing line breaks anymore. In
addition to being less idiotic, it is consistent with other codecs and
thus allows more switches between formats and codecs. It also fixes the
issue of the trailing line returns being simple \n instead of CRLF in
the ASS rectangle dialogue (this is the reason of the FATE update).
Current MicroDVD AVPackets contain timing information and trailing line
breaks. The data is now only composed of the markup data. Doing this
consistently between text subtitles decoders allows to use different
codec for various formats. For instance, MicroDVD markup is sometimes
found in some VPlayer files. Also, generally speaking, the subtitles
text decoders have no use of these timings (and they must not use them
since it would break any user timing adjustment).
Technically, this is a major ABI break. In practice, a mismatching
lavf/lavc will now error out for MicroDVD decoding. Supporting both
formats requires unnecessary complex and fragile code.
FATE needs update because line breaks in the ASS file were "\n" (because
that's what is used in the original file). ASS format expect "\r\n" line
breaks; this commit fixes this issue. Also note that this "\r\n"
trailing need to be moved at some point from the decoders to the ASS
muxer.
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
The initial testing of the VFW binary codec was flawed,
likely due to an AviSynth bug.
Re-testing using VirtualDub and various professional editing
applications has revealed it should have been flipped.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This change requires the user to specify min and max value, and makes
possible to prevent the user to set AV_{SAMPLE,PIX}_FMT_NONE if
forbidden.
Add required ifdeffery in case of mixed libraries, when libavutil is
updated but not the other libraries.
This is a followup of 08d0969c14.
Add capability of reading multiple frames instead of only first.
Implement support for different gif frame 'disposal methods'.
Add option that allows to change background color resulting from
conversion of gif with transparency to any other format which
not support it.
Also bump lavc minor version.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
Use the i64 field rather than the string value. Using a string to set a
default sample/pixel format is weird, also the new interface is more
consistent with the rest of the API.
This is technically an API break, but hopefully there are no applications
using this feature outside of FFmpeg. In order to save backward
compatibility with mixed libraries in case libavutil is updated but not
the other libraries, some ifdeffery hacks are added.
Note that the version check is only performed when class->version != 0,
since if it is not defined then we assume that no version was defined and
the class is not affected by the change.
We will luckily get rid of the hack at the next major bump.
PIX is an image file format that was used by the BRender 3d engine.
Signed-off-by: Aleksi Nurmi <aleksi.nurmi@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a07c1332cfe092b57b5758f22b686ca58806c60':
parser: Move Doxygen documentation to the header files
PGS subtitles: Expose forced flag
x86: PMINUB: port to cpuflags
Conflicts:
libavcodec/avcodec.h
libavcodec/pgssubdec.c
libavcodec/version.h
libavcodec/x86/ac3dsp.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '14f031d7ecfabba0ef02776d4516aa3dcb7c40d8':
dv: use AVStream.index instead of abusing AVStream.id
lavfi: add ashowinfo filter
avcodec: Add a RFC 3389 comfort noise codec
lpc: Add a function for calculating reflection coefficients from samples
lpc: Add a function for calculating reflection coefficients from autocorrelation coefficients
lavr: document upper bound on number of output samples.
lavr: add general API usage doxy
indeo3: remove duplicate capabilities line.
fate: ac3: Add dependencies
Conflicts:
Changelog
doc/filters.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/af_ashowinfo.c
libavfilter/allfilters.c
libavfilter/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This isn't too useful as a normal codec, but can be used in
voip style applications. The decoder updates the noise
generator parameters when a packet is given to it for decoding,
but if called with an empty packet, it generates more noise
according to the last parameters.
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit introduces a new packet side data type for the subtitle
position information. This is meant to be used by the SRT format where
that information is stored along with the timing, which is not part of
the subrip packets.
This commit introduces a new AVPacket side data type:
AV_PKT_DATA_STRINGS_METADATA. Its main goal is to provide a way to
transmit the metadata from the AVFilterBufferRef up to the AVFrame. This
is at the moment "only" useful for lavfi input from libavdevice:
lavd/lavfi only outputs packets, and the metadata from the buffer ref
kept in its context needs to be transmitted from the packet to the frame
by the decoders. The buffer ref can be destroyed at any time (along with
the metadata), and a duplication of the AVPacket needs to duplicate the
metadata as well, so the choice of using the side data to store them was
selected.
Making sure lavd/lavfi raises the metadata is useful to allow tools like
ffprobe to access the filters metadata (it is at the moment the only
way); ffprobe will now automatically show the AVFrame metadata in any
customizable output format for users. API users will also be able to
access the AVFrame->metadata pointer the same way ffprobe does
(av_frame_get_metadata).
All the changes are done in this single commit to avoid some memory
leaks: for instances, the changes in lavfi/avcodec.c are meant to
duplicate the metadata from the buffer ref into the AVFrame. Unless we
have an internal way of freeing the AVFrame->metadata automatically, it
will leak in most of the user apps. To fix this problem, we introduce
AVCodecContext->metadata and link avctx->metadata to the current
frame->metadata and free it at each decode frame call (and in the codec
closing callback for the last one). But doing this also means to update
the way the tiff decoder already handles the AVFrame->metadata (it's the
only one decoder with frame metadata at the moment), by making sure it
is not trying to free a pointer already freed by the lavc internals.
The lavfi/avcodec.c buffer ref code is based on an old Thomas Kühnel
work, the rest of the code belongs to the commit author.
Signed-off-by: Thomas Kühnel <kuehnelth@googlemail.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
* qatar/master:
yuv4mpeg: return proper error codes.
Give all anonymously typedeffed structs in headers a name
fate: Add parseutils test
parseutils-test: Drop random colors from parsing test
vf_pad/scale: use double precision for aspect ratios.
build: error on variable-length arrays
ppc: swscale: rework yuv2planeX_altivec()
ppc: fmtconvert: kill VLA in float_to_int16_interleave_altivec()
x86: dsputil: kill VLA in gmc_mmx()
libspeexenc: Updated commentary to reflect recent changes
libspeexenc: Add an option for enabling DTX
doc/APIchanges: fill in missing dates and hashes.
lavr: bump major to 1 and declare it stable.
lavr: change the type of the data buffers to uint8_t**.
lavc: deprecate the audio resampling API.
Conflicts:
cmdutils.h
configure
doc/APIchanges
ffplay.c
libavcodec/dwt.h
libavcodec/libspeexenc.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavformat/asf.h
tests/fate/libavutil.mak
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libopus: Remap channels using libopus' internal remapping.
Opus decoder using libopus
avcodec: document the use of AVCodecContext.delay for audio decoding
vc1dec: add flush function for WMV9 and VC-1 decoders
http: Increase buffer sizes to cope with longer URIs
nutenc: const correctness for ff_put_v_trace/put_s_trace function arguments
h264_refs: Fix debug tprintf argument types
golomb: const correctness for get_ue()/get_se() function arguments
get_bits: const correctness for get_bits_trace()/get_xbits_trace() arguments
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dwt: Drop unused functions spatial_compose{53|97}i()
nutdec: Remove unused and broken debug function stub
avcodec: Drop long-deprecated imgconvert.h header
Add Opus support to the Ogg muxer.
Add Opus codec id and codec description.
avformat: Identify anonymous AVIO typedef structs.
Conflicts:
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/imgconvert.h
libavcodec/version.h
libavformat/oggenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7751e4693dd10ec98c20fbd9887233b575034272':
ogg: check that the expected number of headers had been parsed
libx264: change default to closed gop to match x264cli
Use avcodec_free_frame() to free AVFrames.
lavf: use a malloced AVFrame in try_decode_frame().
lavc: add avcodec_free_frame().
lavc: ensure extended_data is set properly on decoding
lavc: initialize AVFrame.extended_data in avcodec_get_frame_defaults()
lavc: use av_mallocz to allocate AVFrames.
lavc: rename the argument of avcodec_alloc_frame/get_frame_defaults
Conflicts:
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/src_movie.c
libavformat/oggdec.c
libavformat/oggdec.h
libavformat/oggparsetheora.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Japanese DTV uses some non standard extensions in AAC audio.
One example is 'dual mono', which combines two independent
audio into one stereo stream, storing them in left and right channels
respectively. Historically, dual mono audio has been used for
multi-lingual audio, one for local/native language, and another for english,
and usually the "main" (local language) channel should be output without
any user interactions.
The frames of those dual mono audio are allowed to set
ADTS channel_config field to 0, and just contain two SCE's *WITHOUT* PCE,
which is a non standard extension by Japanese DTV standard.
(ref. ARIB STD-B32 PartII 5.2.3)
This patch adds an AVPacket side data, AV_PKT_DATA_JP_DUALMONO,
which indicates that the AVPacket is likely to contain an audio frame
with the above dual mono extension, and has the parameter to specify
the desired channel selection in that case.
It also makes aacdec to detect dual mono and output just the desired
channel when this side data is attached.
Signed-off-by: Akihiro Tsukada <atsukada@users.sourceforge.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec36aa69448f20a78d8c4588265022e0b2272ab5':
x86: Fix linking with some or all of yasm, mmx, optimizations disabled
configure: Add more fine-grained SSE CPU capabilities flags
avfilter: x86: Use more precise compile template names
x86: cosmetics: Comment some #endifs for better readability
g723_1: add comfort noise generation
utvideoenc: Switch to dsputils' median prediction
utvideoenc: Avoid writing into the input picture
avtools: remove the distinction between func_arg and func2_arg.
avconv: make the -passlogfile option per-stream.
avconv: make the -pass option per-stream.
cmdutils: make -codecs print lossy/lossless flags.
lavc: add lossy/lossless codec properties.
Conflicts:
Changelog
cmdutils.c
configure
doc/APIchanges
ffmpeg.h
ffmpeg_opt.c
ffprobe.c
libavcodec/codec_desc.c
libavcodec/g723_1.c
libavcodec/utvideoenc.c
libavcodec/version.h
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/rv40dsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Add FATE tests for the Ut Video encoder
lavc: add Ut Video encoder
mpegvideo_enc: remove stray duplicate line from 7f9aaa4
swscale: x86: fix #endif comments in rgb2rgb template file
avconv: mark more options as expert.
avconv: split printing "main options" into global and per-file.
avconv: refactor help printing.
Conflicts:
Changelog
ffmpeg_opt.c
ffserver.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Unsurprisingly, if a timing-less subrip decoder is desireable, an
encoder is as well. With this in place, we can move on to remove
the use of the old encoder/decoder with embedded timing and move
all timing handling the (de)muxer where they belong.
Signed-off-by: Philip Langdale <philipl@overt.org>
Note that the symbols used to run the hardware decoder in asynchronous mode
have been marked deprecated and will be dropped at a future version bump.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Note that the symbols used to run the hardware decoder in asynchronous mode
has been marked as deprecated and will be dropped at a future version dump.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This change introduces a basic encoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to write styling information,
and just writes the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Note that an additional change is required to the mov/mp4 muxer to
write empty subtitle packets to indicate subtitle duration.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
rtmp: Add a new option 'rtmp_pageurl'
doc: Update the description of the rtmp_tcurl option
rtmp: Make the description of the rtmp_tcurl option more generic
libfdk-aacenc: add LATM/LOAS encapsulation support
sctp: add port missing error message
tcp: add port missing error message
avfilter: Fix printf format string conversion specifier
Conflicts:
libavcodec/version.h
libavfilter/avfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libopenjpeg: introduce encoding support
libopenjpeg: rename decoder source file.
RTMPTS protocol support
RTMPS protocol support
avconv: print an error message when demuxing fails.
tscc2: DCT output should not be clipped
rtmp: Rename rtmphttp to ffrtmphttp
Conflicts:
Changelog
configure
doc/general.texi
libavcodec/libopenjpegenc.c
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This change introduces a basic decoder for 3GPP Timed Text subtitles,
also known as TX3G, Quicktime subtitles, or "movtext" in the existing
code.
This initial change doesn't attempt to parse styling information,
and just reads the plain text of the subtitles. I intend to add
support for styles eventually, but it's challenging due to a lack
of existing players that support them.
Signed-off-by: Philip Langdale <philipl@overt.org>
Work done for SOCIS 2011.
See thread:
Subject: [libav-devel] [PATCH 2/3] tiff: Add GeoTIFF support to the TIFF decoder
Date: Tue, 4 Oct 2011 00:19:52 +0200
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* qatar/master:
build: Fix APE tag dependencies
MS Expression Encoder Screen decoder
libfdk-aac: Allow setting the encoder bandwidth/cutoff frequency
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The number of pixel formats outgrew the number of available bits in
the bitmask used in avcodec_find_best_pix_fmt().
avcodec_find_best_pix_fmt2() uses a PIX_FMT_NONE terminated list
of pixel formats instead.
* qatar/master:
build: Fix Ogg demuxer dependencies
build: Fix FLAC demuxer dependencies
flac: Move flac functions shared between libraries to flac common code
build: Fix CAF demuxer dependencies
build: Fix MP2 muxer dependencies
build: Add missing build rules for the ISMV muxer
configure: Drop redundant mxf_d10 test dependency declaration
Support AAC encoding via the external library fdk-aac
libavcodec: Add more AAC profiles
dct/fft-test: use a replacement getopt() if the system has none present.
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: Check for the math function rint
TechSmith Screen Codec 2 decoder
rtsp: Add listen mode
rtsp: Make rtsp_open_transport_ctx() non-static
rtsp: Move rtsp_read_close
rtsp: Parse the mode=receive/record parameter in transport lines
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (29 commits)
lavfi: reclassify showfiltfmts as a TESTPROG
graph2dot: fix printf format specifier
swscale: yuv2planeX 8bit >=sse2 functions need aligned stack on x86-32.
vp8: loopfilter >=sse2 functions need aligned stack on x86-32.
amr: remove shift out of the AMR_BIT() macro.
dsputilenc: group yasm and inline asm function pointer assignment.
mov: use forward declaration of a function instead of a table.
Clarify Doxygen comment for FF_API_* #defines.
configure: simplify get_version()
Create version.h headers for libraries that lack them
gitignore: Use full path instead of relative path to specify patterns
mpegvideo: remove VLAs
Add XTEA encryption support in libavutil
Add Blowfish encryption support in libavutil
eval: Add the isinf() function and tests for it
flacdec: move lpc filter to flacdsp
flacdec: split off channel decorrelation as flacdsp
avplay: Add an option for not limiting the input buffer size
FATE: add a test for WMA cover art.
FATE: add a test for apetag cover art
...
Conflicts:
.gitignore
configure
ffplay.c
libavcodec/Makefile
libavcodec/error_resilience.c
libavcodec/mpegvideo.c
libavcodec/ratecontrol.c
libavdevice/avdevice.h
libavfilter/Makefile
libavfilter/filtfmts.c
libavfilter/version.h
libavformat/mov.c
libavformat/version.h
libavutil/Makefile
libavutil/avutil.h
libavutil/version.h
libswscale/swscale.h
libswscale/x86/swscale_mmx.c
tests/fate/libavutil.mak
tests/lavfi-regression.sh
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cosmetics: Consistently use C-style comments with multiple inclusion guards
anm: fix a few Doxygen comments
misc typo and wording fixes
attributes: add av_noreturn
attributes: drop pointless define guards
configure: do not disable av_always_inline with --enable-small
flvdec: initial stream switch support
avplay: fix write on freed memory for rawvideo
snow: remove a VLA used for edge emulation
x86: lavfi: fix gradfun/yadif build with mmx/sse disabled
snow: remove the runs[] VLA.
snow: Check mallocs at init
flacdec: remove redundant setting of avctx->sample_fmt
Conflicts:
ffplay.c
libavcodec/h264.c
libavcodec/snow.c
libavcodec/snow.h
libavcodec/snowdec.c
libavcodec/snowenc.c
libavformat/flvdec.c
libavutil/attributes.h
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asfdec: read attached pictures.
apetag: reindent
apetag: export attached covers as video streams.
apetag: fix the amount of data read from binary tags.
apetag: make sure avio_get_str() doesn't read more than it should.
mov: read itunes cover art.
snow: remove VLA in mc_block()
intfloat: Don't use designated initializers in the public headers
snow: remove a VLA.
doc: Remind devs to check return values, especially for malloc() et al
MS ATC Screen (aka MSS3) decoder
vf_yadif: move x86 init code to x86/yadif.c
vf_gradfun: move x86 init code to x86/gradfun.c
roqvideo: Remove a totally unused dspcontext
smacker: remove some unused code
dsicin: remove dead assignment
aacdec: remove dead assignment
rl2: remove dead assignment
proresenc: make a variable local to the loop where it is used
alsdec: remove dead assignments
Conflicts:
Changelog
doc/developer.texi
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavfilter/gradfun.h
libavfilter/x86/gradfun.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Move the lavc/imgconvert functions and rename them as follows:
avpicture_get_size -> av_image_get_buffer_size()
avpicture_fill -> av_image_fill_arrays()
avpicture_layout -> av_image_copy_to_buffer()
The new functions have an align parameter, which allows to define the
linesize alignment assumed in the buffer (which is set or read).
The names of the functions are consistent with the lavu/samples API
(av_samples_get_buffer_size(), av_samples_fill_arrays()).
* qatar/master:
MS Screen 1 decoder
aacdec: Fix popping channel layouts.
av_gettime: support Win32 without gettimeofday()
Use av_gettime() in various places
Move av_gettime() to libavutil
dct-test: use emms_c() from libavutil instead of duplicating it
mov: fix operator precedence bug
mathematics.h: remove a couple of math defines
Remove unnecessary inclusions of [sys/]time.h
lavf: remove unnecessary inclusions of unistd.h
bfin: libswscale: add const where appropriate to fix warnings
bfin: libswscale: remove unnecessary #includes
udp: Properly check for invalid sockets
tcp: Check the return value from getsockopt
network: Use av_strerror for getting error messages
udp: Properly print error from getnameinfo
mmst: Use AVUNERROR() to convert error codes to the right range for strerror
network: Pass pointers of the right type to get/setsockopt/ioctlsocket on windows
rtmp: Reduce the number of idle posts sent by sleeping 50ms
Conflicts:
Changelog
configure
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dct-test.c
libavcodec/version.h
libavformat/riff.c
libavformat/udp.c
libavutil/Makefile
libswscale/bfin/yuv2rgb_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vorbis: Validate that the floor 1 X values contain no duplicates.
avprobe: Identify codec probe failures rather than calling them unsupported codecs.
avformat: Probe codecs at score 0 on buffer exhaustion conditions.
avformat: Factorize codec probing.
Indeo Audio decoder
imc: make IMDCT support stereo output
imc: move channel-specific data into separate context
lavfi: remove request/poll and drawing functions from public API on next bump
lavfi: make avfilter_insert_pad and pals private on next bump.
lavfi: make formats API private on next bump.
avplay: use buffersrc instead of custom input filter.
avtools: move buffer management code from avconv to cmdutils.
avconv: don't use InputStream in the buffer management code.
avconv: fix exiting when max frames is reached.
mpc8: fix maximum bands handling
aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.
Conflicts:
Changelog
cmdutils.h
ffmpeg.c
ffplay.c
ffprobe.c
libavcodec/avcodec.h
libavcodec/mpc8.c
libavcodec/v210dec.h
libavcodec/version.h
libavcodec/vorbisdec.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/buffersrc.c
libavfilter/formats.c
libavfilter/src_movie.c
libavfilter/vf_aspect.c
libavfilter/vf_blackframe.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_cropdetect.c
libavfilter/vf_delogo.c
libavfilter/vf_drawbox.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_fifo.c
libavfilter/vf_format.c
libavfilter/vf_frei0r.c
libavfilter/vf_gradfun.c
libavfilter/vf_hflip.c
libavfilter/vf_hqdn3d.c
libavfilter/vf_libopencv.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_showinfo.c
libavfilter/vf_transpose.c
libavfilter/vf_unsharp.c
libavfilter/vf_yadif.c
libavfilter/vsrc_color.c
libavfilter/vsrc_testsrc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
libxvid: Give more suitable names to libxvid-related files.
libxvid: Separate libxvid encoder from libxvid rate control code.
jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().
fate: cosmetics: lowercase some comments
fate: Give more consistent names to some RealVideo/RealAudio tests.
lavfi: add avfilter_get_audio_buffer_ref_from_arrays().
lavfi: add extended_data to AVFilterBuffer.
lavc: check that extended_data is properly set in avcodec_encode_audio2().
lavc: pad last audio frame with silence when needed.
samplefmt: add a function for filling a buffer with silence.
samplefmt: add a function for copying audio samples.
lavr: do not try to copy to uninitialized output audio data.
lavr: make avresample_read() with NULL output discard samples.
fate: split idroq audio and video into separate tests
fate: improve dependencies
fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests
fate: split some combined tests into separate audio and video tests
fate: fix dependencies for probe tests
mips: intreadwrite: fix inline asm for gcc 4.8
mips: intreadwrite: remove unnecessary inline asm
...
Conflicts:
cmdutils.h
configure
doc/APIchanges
doc/filters.texi
ffmpeg.c
ffplay.c
libavcodec/internal.h
libavcodec/jpeglsdec.c
libavcodec/libschroedingerdec.c
libavcodec/libxvid.c
libavcodec/libxvid_rc.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/buffersink.h
tests/Makefile
tests/fate/aac.mak
tests/fate/audio.mak
tests/fate/demux.mak
tests/fate/ea.mak
tests/fate/image.mak
tests/fate/libavutil.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
tests/fate/qt.mak
tests/fate/real.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/fate/voice.mak
tests/fate/vqf.mak
tests/ref/fate/ea-mad
tests/ref/fate/ea-tqi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libschroedinger: Switch to function names more in line with Libav style.
Move code shared between libdirac and libschroedinger to libschroedinger.
lavfi: uninline avfilter_copy_buffer_ref_props().
lavf: add missing '*' in a doxy.
h264: Remove a commented-out function pointer typedef.
txd: Remove write-only variable in txd_decode_frame().
mmvideo.c: Remove unused variable in mm_decode_pal().
build: cosmetics: Add missing end-of-line backslashes to item lists.
build: cosmetics: Split HEADERS/OBJS/PROGS lists into one entry per line.
libschroedinger: Move a function to avoid a forward declaration.
pthread: warn on high thread counts
vf_yadif: fix missing error handling for avfilter_poll_frame()
avprobe: allow showing only one container/stream property.
lavfi: support audio in avfilter_copy_frame_props().
lavfi: avfilter_merge_formats: handle case where inputs are same
lavc: add sample rate and channel layout to AVFrame.
zerocodec: check if the previous frame is missing
doc: clarify check for NULL pointer style
Conflicts:
doc/APIchanges
doc/developer.texi
ffprobe.c
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/libdirac_libschro.c
libavcodec/libdirac_libschro.h
libavcodec/mmvideo.c
libavcodec/txd.c
libavcodec/version.h
libavcodec/zerocodec.c
libavfilter/Makefile
libavfilter/avfilter.c
libavfilter/version.h
libavformat/Makefile
libavutil/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Compared to av_opt_ptr, accessors bring:
- better performance (negligible);
- compile-time type check;
- link-time existence check
(or at worst, a dynamic linker error instead of a NULL dereference).
* qatar/master:
avcodec: remove AVCodecContext.dsp_mask
avconv: fix a segfault when default encoder for a format doesn't exist.
utvideo: general cosmetics
aac: Handle HE-AACv2 when sniffing a channel order.
movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
xxan: Remove write-only variable in xan_decode_frame_type0().
ivi_common: Initialize a variable at declaration in ff_ivi_decode_blocks().
Conflicts:
ffmpeg.c
libavcodec/utvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This removes all references to AVCodecContext.dsp_mask and marks
it for eviction at the next version bump. It has been superseded
by av_set_cpu_flag_mask() which, unlike this field, works everywhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
avcodec: add a cook parser to get subpacket duration
FATE: allow lavf tests to alter input parameters
FATE: replace the acodec-pcm_s24daud test with an enc_dec_pcm checksum test
FATE: replace the acodec-g726 test with 4 new encode/decode tests
FATE: replace current g722 encoding tests with an encode/decode test
FATE: add a pattern rule for generating asynth wav files
FATE: optionally write a WAVE header in audiogen
avutil: add audio fifo buffer
Conflicts:
doc/APIchanges
libavcodec/version.h
libavutil/avutil.h
tests/Makefile
tests/codec-regression.sh
tests/fate/voice.mak
tests/lavf-regression.sh
tests/ref/acodec/g722
tests/ref/acodec/g726
tests/ref/acodec/pcm_s24daud
tests/ref/lavf/dv_fmt
tests/ref/lavf/gxf
tests/ref/lavf/mxf
tests/ref/lavf/mxf_d10
tests/ref/seek/lavf_dv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
rv40dsp x86: use only one register, for both increment and loop counter
rv40dsp: implement prescaled versions for biweight.
avconv: use default channel layouts when they are unknown
avconv: parse channel layout string
nutdec: K&R formatting cosmetics
vda: Signal 4 byte NAL headers to the decoder regardless of what's in the extradata
mem: Consistently return NULL for av_malloc(0)
vf_overlay: implement poll_frame()
vf_scale: support named constants for sws flags.
lavc doxy: add all installed headers to doxy groups.
lavc doxy: add avfft to the main lavc group.
lavc doxy: add remaining avcodec.h functions to a misc doxygen group.
lavc doxy: add AVPicture functions to a doxy group.
lavc doxy: add resampling functions to a doxy group.
lavc doxy: replace \ with /
lavc doxy: add encoding functions to a doxy group.
lavc doxy: add decoding functions to a doxy group.
lavc doxy: fix formatting of AV_PKT_DATA_{PARAM_CHANGE,H263_MB_INFO}
lavc doxy: add AVPacket-related stuff to a separate doxy group.
lavc doxy: add core functions/definitions to a doxy group.
...
Conflicts:
ffmpeg.c
libavcodec/avcodec.h
libavcodec/vda.c
libavcodec/x86/rv40dsp.asm
libavfilter/vf_scale.c
libavformat/nutdec.c
libavutil/mem.c
tests/ref/acodec/pcm_s24daud
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avconv: use default alignment for audio buffer
avcodec: use align == 0 for default alignment in avcodec_fill_audio_frame()
avutil: use align == 0 for default alignment in audio sample buffer functions
avutil: allow NULL linesize in av_samples_fill_arrays() and av_samples_alloc()
avconv: remove OutputStream.picref.
avconv: only set SAR once on the decoded frame.
avcodec: validate the channel layout vs. channel count for decoders
audioconvert: make av_get_channel_layout accept composite names.
avutil: add av_get_packed_sample_fmt() and av_get_planar_sample_fmt()
Conflicts:
doc/APIchanges
ffmpeg.c
libavcodec/utils.c
libavcodec/version.h
libavutil/audioconvert.c
libavutil/audioconvert.h
libavutil/avutil.h
libavutil/samplefmt.c
libavutil/samplefmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is slightly proprietary.
DVDs use a format of
code byte (0x00, 0x01, 0xfe or 0xff), two data bytes
MOV uses instead
cdat/cdt2 atom, two data bytes
Auto-detecting and supporting both in one decoder is trivial,
so a single codec ID is used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (35 commits)
fix space type in Changelog
ZeroCodec Decoder
RealAudio Lossless decoder
rtpenc: Use AVFormatContext.packet_size instead of a private option
url: Document the expected behaviour of url_read
libavformat: Use AVFormatContext.probesize in init_input
docs: Fix a stray reference to tags in the generic doxy on dicts
cosmetics: Align some AVInput/OutputFormat declarations
zmbv: check decompress result
zmbv: correct indentation
adpcm: convert adpcm_thp to bytestream2.
adpcm: convert adpcm_yamaha to bytestream2.
adpcm: convert adpcm_swf to bytestream2.
adpcm: convert adpcm_sbpro to bytestream2.
adpcm: convert adpcm_ct to bytestream2.
adpcm: convert adpcm_ima_amv/smjpeg to bytestream2.
adpcm: convert adpcm_ea_xas to bytestream2.
adpcm: convert adpcm_ea_r1/2/3 to bytestream2.
adpcm: convert ea_maxis_xa to bytestream2.
adpcm: convert adpcm_ea to bytestream2.
...
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/adpcm.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/zerocodec.c
libavcodec/zmbv.c
libavformat/riff.c
libavformat/url.h
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
An obscure Japanese lossless video codec, originally intended
for use with a remote desktop application.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
