Almost all the places from which this function is called already check
the header manually and in the two that don't (the mp3 muxer) the check
should not cause any problems.
It will not be set unless the muxing codec context is also the encoding
context, which is discouraged. When the frame size is not known from
av_get_audio_frame_duration(), the fallback should still be good enough.
It will not be set if the stream codec context is not the encoding
context. Use av_get_audio_frame_duration() instead, it should work for
all audio codecs supported by the muxer.
* commit '5f3a081b42b84404a40a52c80ef7a354cf048c56':
avi: Spin out the logic to position to the next non-interleaved stream
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
matroskaenc applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit 'a0fa6d06b848f26b16ba12f0a9a4a85b93ab8022':
matroska: Warn when metadata references a non-existent element
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
It is required to call va_end for each invocation of va_start within the
same function.
Fixes: CID 1341583.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Checking the codec context parameters to find out this information is
far too unreliable to be useful, so it is safer to assume B-frames are
always present.
QuickTime metadata can come after trak data. Add indicator for which trak is being parsed (-1 if none) so that global metadata after the trak can be parsed.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If size is zero, avio_get_str fails, leaving the buffer uninitialized.
This causes invalid reads in av_set_options_string.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Otherwise the ffm demuxer can return the same packets endlessly, if
there is no server attached.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
ts->mux_rate is int (signed 32-bit) type. The period calculations
will start to overflow when mux_rate > 5mbps. This fixes overflows
by converting first to 64-bit type.
Fixes#5044.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This code is disabled by default so not to regress endpoints sending invalid MIME, but can be enabled via AVOption 'strict_mime_boundary'
Signed-off-by: Alex Agranovsky <alex@sighthound.com>
matroskaenc.c applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec.c
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
"Fast seek" uses linear interpolation to find the position of the
requested seek time. For CBR this is more direct than using the
mp3 TOC and bypassing the TOC avoids problems with TOC precision.
(see https://crbug.com/545914#c13)
For VBR, fast seek is not precise, so continue to prefer the TOC
when available (the lesser of two evils).
Also, some re-ordering of the logic in mp3_seek to simplify and
give usetoc=1 precedence over fastseek flag.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
* commit '12b14382861fbf19378afcddaa19cd9a949a86a3':
udp: Provide additional information on getaddrinfo failure
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8375dc1dd101d51baa430f34c0bcadfa37873896':
asfdec: handle the case when the stream index has an invalid value better
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fixes probing of truehd/mlp files with a lot of frames in between the
major sync frames. The spec allows a distance of up to 128 frames in
between major sync frames, which leads to the probing code not reaching
the desired score.
Avoid decoding a frame to get the codec parameters while the codec
supports FF_CODEC_CAP_SKIP_FRAME_FILL_PARAM. This is particulary useful
to avoid decoding twice images (once in avformat_find_stream_info and
once when the actual decode is made).
If duration is still AV_NOPTS_VALUE when opening the next file, we can assume
that outpoint is not set.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
The demuxer returned INVALIDDATA and failed to demux the remaining data
when an invalid stream index was read, now it just skips the asf packet
for the stream with an invalid stream index and continues demuxing.
Reported-By: Hendrik Leppkes
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '21ab6fd01b9107d7171fc1a77c2bfacff845a97a':
lavf: document that passing valid timestamps to muxers is now mandatory
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '62b4a6f1b9aa83d56701af226adda98faa5ede09':
rtmpcrypt: Provide the xtea keys in little endian format for consistency
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '588b6215b4c74945994eb9636b0699028c069ed2':
rtmpcrypt: Do the xtea decryption in little endian mode
xtea: Add functions for little endian mode
Conflicts:
libavutil/xtea.c
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This should fix a infinite loop
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously only the edit_rate of material_track was checked.
If it's negative, it causes assertion failures in av_rescale_rnd.
Reviewed-by: Tim Nicholson <nichot20-at-yahoo.com@ffmpeg.org>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '1d62ee38894afb696674db78cee8f8d89204a8fe':
movenc: Add a unit test for signaling of the track start times
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This way, it never starts with 0xFFF0, and never trips the
ADTS "Detection" code in movenc.c.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
DASH manifest should have framerate specified as an attribute in the
AdaptationSet element and Representation elements. Though ISO/IEC
23009-1:2014 doesn't seem to define frameRate as a required attribute,
it is at least optional, and DASH-IF IOP 3.0 seems to require it. See
section 3.2.4 of http://dashif.org/w/2015/04/DASH-IF-IOP-v3.0.pdf
In the event that avg_frame_rate is not set in the muxer, we ignore the
frameRate tag altogther.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature allows making associations between audio tracks
that apple players recognize. E.g. when an ac3 track has a
tref that points to an aac track, devices that don't support
ac3 will automatically fall back to the aac track.
Apple used to *guess* these associations, but new products
(AppleTV 4) no longer guess and this association can only
be made explicitly now using the "fall" tref.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
In the spirit of commit 8199908fdf, likely
typo originally.
Found by enabling -Wparentheses on clang 3.7 and running a manual audit.
To the best of my knowledge, no such instances remain.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Unrecognized streams are not allocated
Fixes: flicker-1.color1.vp91447030769.08.webm
Found-by: Chris Cunningham <chcunningham@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '3eeb7edfc2a1157b7b0e0ce21ac2cd44d55d405b':
movenc: Add a unit test for frag_discont with edit lists
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
All diferences in unit tests have been acounted for.
* commit '59e8ec0aa8ab174701d01a3bfe96fedd0b7fcead':
movenc: Add an API unit test for fragmenting options/calls
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This is possibly undefined behavior based on sequence point rules, but I
have not studied the spec at that level of detail.
Fixes: CID 1338321.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes a mpegts file with hevc that fails estimating duration. Increasing number of
retries fixes the issue.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This implementation does not support TLS listen sockets and loading
CA/Certs from files.
The Windows API does not support loading PEM certs, and would either
require a manual loader or instead be limited to loading Windows PFX
certificates
TLS listen sockets would have to be implemented quite separately, as many
of the APIs are different for server-mode (as opposed to client mode).
The XTEA algorithm operates on 32 bit numbers, not on byte sequences.
The XTEA implementation in libavutil is written assuming big endian
numbers, while the rtmpe signature encryption assumes little endian.
This fixes rtmpe communication with rtmpe servers that use signature
type 8 (XTEA), e.g. crunchyroll.
Signed-off-by: Martin Storsjö <martin@martin.st>
When async issues its inner seek via ffurl_seek, it treats failures as
EOF being reached. This is not consistent with the behavior of other
protocols (e.g. http, cache) which continue to tolerate reads after
failed seeks, and therefore does not interact correctly with them.
A common pattern where this manifests itself is where avio_seek is
called with pos to be the end-of-file - the http range-request would
fail here, and async would set io_eof_reached to 1. The background
thread would then refuse to read more bytes, and subsequent reads would
only empty the fifo and end in an error.
Presumably the code may have expected subsequent seeks to unset the
io_eof_reached but this is not guaranteed to be true - a subsequent seek
that lands in the AVIOContext's buffer (the fact that the
previously-failed avio_seek leaves the AVIOContext's buffer intact also
suggests that follow-up reads are expected to be tolerated) would not be
issued to the async_seek function, and when that buffer is drained only
async_read calls would follow, leading to the same error just described.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some entries might be either empty or contain types we do not parse
(eg. 'url '). In both cases, if an 'alis' is not the first entry,
external references are not loaded, so make sure that the array starts
with an 'alis' dref.
Rather than reading the alternate absolute path version from dref
type 18, make sure that 0s are considered as '/'. These values are
sometimes present in the full path, and are mistakenly interpreted as
line terminators othewise.
With the correct handling of this dref type, parsing type 18 is not
needed any more.
By writing a zero-sized packet, the caller can communicate the
start_dts/start_cts for the stream without actually writing
the first packet.
This allows doing random-access writing of fragments when the
start dts of the stream isn't zero, so that the edit list in the moov
is written based on timestamps from the nominal start time signaled
via the zero-sized packet, while the first proper packet written
corresponds to a later fragment.
To avoid potential unexpected behaviour, empty packets only set
start_dts if the frag_discont flag is set.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows producing fragments discontinously where the video
stream has b-frames (but starts at pts=0), but doesn't work for the
cases with audio with preroll.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8ad5124b7ecf7f727724e270a7b4bb8c7bcbf6a4':
movenc: Automatically flush after writing the initial moov
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
