* qatar/master: (29 commits)
sbrdsp.asm: convert all instructions to float/SSE ones.
dv: cosmetics.
dv: check buffer size before reading profile.
Revert "AAC SBR: group some writes."
udp: Print an error message if bind fails
cook: extend channel uncoupling tables so the full bit range is covered.
roqvideo: cosmetics.
roqvideo: convert to bytestream2 API.
dca: don't use av_clip_uintp2().
wmall: fix build with -DDEBUG enabled.
smc: port to bytestream2 API.
AAC SBR: group some writes.
dsputil: remove shift parameter from scalarproduct_int16
SBR DSP: unroll sum_square
rv34: remove dead code in intra availability check
rv34: clean a bit availability checks.
v4l2: update documentation
tgq: convert to bytestream2 API.
parser: remove forward declaration of MpegEncContext
dca: prevent accessing static arrays with invalid indexes.
...
Conflicts:
doc/indevs.texi
libavcodec/Makefile
libavcodec/dca.c
libavcodec/dvdata.c
libavcodec/eatgq.c
libavcodec/mmvideo.c
libavcodec/roqvideodec.c
libavcodec/smc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
smacker: Sanity check huffman tables found in the headers.
smacker: remove dead store
qdm2: Check data block size for bytes to bits overflow.
mxfdec: Fix files with essence containers larger than 2 GiB.
mxfdec: Employ correct printf conversion specifiers for POSIX int types.
vc1: always read the bfraction element for interlaced fields
fate: add XWD image regression test
lavf: prevent infinite loops while flushing in avformat_find_stream_info
matroskadec: Pad AAC extradata.
ismindex: Fix build on mingw
Conflicts:
libavformat/mxfdec.c
libavformat/utils.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, it would not be read if refdist_flag was not set, however
according to the spec and the reference decoder, it should always be read.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
Remove ffmpeg.
aacenc: Simplify windowing
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
aacenc: Deinterleave input samples before processing.
aacenc: Store channel count in AACEncContext.
aacenc: Move Q^3/4 calculation to it's own table
aacenc: Request normalized float samples instead of converting s16 samples to float.
aacpsy: Replace an if with FFMAX in LAME windowing.
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
aacenc: cosmetics: move init() and end() to the bottom of the file.
aacenc: aac_encode_init() cleanup
XWD encoder and decoder
vc1: don't read the interpfrm and bfraction elements for interlaced frames
mxfdec: fix memleak on mxf_read_close()
westwood: split the AUD and VQA demuxers into separate files.
Conflicts:
.gitignore
Changelog
Makefile
configure
doc/ffmpeg.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/aacenc.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/img2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This matches the spec as well as the reference decoder, and fixes a bug
with interlaced frame decoding.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
vc1: use an enum for Frame Coding Mode
doc: cleanup filter section
indeo3: error out if no motion vector is set.
x86inc: Flag shufps as an floating-point instruction for the AVX emulation code.
mpegaudio: do not use init_static_data() for initializing tables.
musepack: fix signed shift overflow in mpc_read_packet()
mov: Make format string match variable type.
wmavoice: Make format string match variable type.
vc1: select interlaced scan table by FCM element
Generalize RIFF INFO tag support; support reading INFO tag in wav
pthread: track thread existence in a separate variable.
Conflicts:
doc/filters.texi
libavcodec/pthread.c
libavformat/avi.c
libavformat/riff.c
libavformat/riff.h
libavformat/wav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
prores: add FATE tests
id3v2: reduce the scope of some non-globally-used symbols/structures
id3v2: cosmetics: move some declarations before the places they are used
shorten: remove the flush function.
shn: do not allow seeking in the raw shn demuxer.
avformat: add AVInputFormat flag AVFMT_NO_BYTE_SEEK.
avformat: update AVInputFormat allowed flags
avformat: don't unconditionally call ff_read_frame_flush() when trying to seek.
truespeech: use sizeof() instead of hardcoded sizes
truespeech: remove unneeded variable, 'consumed'
truespeech: simplify truespeech_read_frame() by using get_bits()
truespeech: decode directly to output buffer instead of a temp buffer
truespeech: check to make sure channels == 1
truespeech: check for large enough output buffer rather than truncating output
truespeech: remove unneeded zero-size packet check.
mlpdec: return meaningful error codes instead of -1
mlpdec: remove unnecessary wrapper function
mlpdec: only calculate output size once
mlpdec: validate that the reported channel count matches the actual output channel count
pcm: reduce pointer type casting
...
Conflicts:
libavformat/avformat.h
libavformat/id3v2.c
libavformat/id3v2.h
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Both v->fcm and v->field_mode are used in common code, now they won't be
reset for progressive frame after interlaced one causing writing past the
frame end for example.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (34 commits)
h264: reset h->ref_count in case of errors in ff_h264_decode_ref_pic_list_reordering()
error_resilience: fix the check for missing references in ff_er_frame_end() for H264
4xm: prevent NULL dereference with invalid huffman table
4xmdemux: prevent use of uninitialized memory
4xm: clear FF_INPUT_BUFFER_PADDING_SIZE bytes in temporary buffers
ptx: check for out of bound reads
tiffdec: fix out of bound reads/writes
eacmv: check for out of bound reads
eacmv: fix potential pointer arithmetic overflows
adpcm: fix out of bound reads due to integer overflow
anm: prevent infinite loop
avsdemux: check for out of bound writes
avs: check for out of bound reads
avsdemux: check for corrupted data
AVOptions: refactor set_number/write_number
AVOptions: cosmetics, rename static av_set_number2() to write_number().
AVOptions: cosmetics, move and rename static av_set_number().
AVOptions: split av_set_string3 into opt type-specific functions
avidec: fix signed overflow in avi_sync()
mxfdec: Fix some buffer overreads caused by the misuse of AVPacket related functions.
...
Conflicts:
Changelog
configure
libavcodec/ptx.c
libavcodec/ra144.c
libavcodec/vaapi_vc1.c
libavcodec/vc1.c
libavcodec/version.h
libavformat/4xm.c
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vp6: partially propagate huffman tree building errors during coeff model parsing and fix misspelling
mpeg12: propagate chunk decode errors and fix conditional indentation
vc1: fix VC-1 Pulldown handling.
VC1: Fix first/last row checks with slices
mp4: Handle non-trivial ES Descriptors.
vc1: properly zero coded_block[] edges on new slice entry.
Conflicts:
libavcodec/vc1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Pulldown flags are being set incorrectly and AVFrame->repeat_pict is not
being set. Also, skipped frames exit header parsing too early and do not
set pulldown flags appropriately. Ticks_per_frame needs to be set and
time_base adjusted so player can extend frame duration by a field time.
This fixes problems encountered when attempting to transcode HD-DVD EVOB
files with HandBrake. Also makes these files play smoothly in avplay.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
avconv: print the codecs names in the stream mapping.
avconv: move the avcodec_find_decoder() call to add_input_streams().
Windows Media Image decoder (WMVP/WVP2)
ac3enc: remove outdated TODO comment for apply_channel_coupling()
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/vc1dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avcodec_set_dimensions should be used for size changes to ensure
compatibility with future changes.
avctx->width/avctx->height may not be set to display-only dimensions.
Even more so since vc1dec.c would later set coded_width/height based
on this.
coded_width/coded_height should be used instead of width/height for
decoder setup.
This fixes playback of e.g. zz-mcr-nsqr.vc1 sample (containing
display width/height settings) in MPlayer and should fix a crash
with MPC: http://forum.doom9.org/showthread.php?t=162221.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
rv30: return AVERROR(EINVAL) instead of EINVAL
build: add -L flags before existing LDFLAGS
simple_idct: whitespace cosmetics
simple_idct: make repeated code a macro
dsputil: remove huge #if 0 block
simple_idct: change 10-bit add/put stride from pixels to bytes
dsputil: allow 9/10-bit functions for non-h264 codecs
dnxhd: rename some data tables
dnxhdenc: remove inline from function only called through pointer
dnxhdenc: whitespace cosmetics
swscale: mark YUV422P10(LE,BE) as supported for output
configure: add -xc99 to LDFLAGS for Sun CC
Remove unused and non-compiling vestigial g729 decoder
Remove unused code under G729_BITEXACT #ifdef.
mpegvideo: fix invalid picture unreferencing.
dsputil: Remove extra blank line at end.
dsputil: Replace a LONG_MAX check with HAVE_FAST_64BIT.
simple_idct: add 10-bit version
Conflicts:
Makefile
libavcodec/g729data.h
libavcodec/g729dec.c
libavcodec/rv30.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ARM: ac3: update ff_ac3_extract_exponents_neon per 8b7b2d6
ARM: NEON optimised vector_clip_int32()
swscale: disable full_chroma_int when converting to non-24/32bpp RGB.
suggest to use av_get_bytes_per_sample() in av_get_bits_per_sample_format() doxy
ffmpeg: use av_get_bytes_per_sample() in place of av_get_bits_per_sample_fmt()
put_bits: remove ALT_BITSTREAM_WRITER
put_bits: always use intreadwrite.h macros
libavformat: Add an example how to use the metadata API
doxygen: Prefer member groups over grouping into modules
doxygen: be more permissive when searching for API examples
avformat: doxify the Metadata API
lavf: restore old behavior for custom AVIOContex with an AVFMT_NOFILE format.
lavf: use the correct pointer in av_open_input_stream().
avidec: infer absolute vs relative index from first packet
Conflicts:
libavformat/Makefile
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Before this, almost all module groups have been used for grouping functions
and fields in structures semantically. This causes them to not appear
properly in the file documentation and needlessly clutters up the "Modules"
index.
Additionally, this commit streamlines some spelling and appearances.
* qatar/master: (23 commits)
doc: Check standalone compilation before submitting new components.
Fix standalone compilation of pipe protocol.
Fix standalone compilation of ac3_fixed encoder.
Fix standalone compilation of binkaudio_dct / binkaudio_rdft decoders.
Fix standalone compilation of IMC decoder.
Fix standalone compilation of WTV demuxer.
Fix standalone compilation of MXPEG decoder.
flashsv: K&R cosmetics
matroskaenc: fix memory leak
vc1: make overlap filter for I-frames bit-exact.
vc1dec: use s->start/end_mb_y instead of passing them as function args.
Revert "VC1: merge idct8x8, coeff adjustments and put_pixels."
Replace strncpy() with av_strlcpy().
indeo3: Eliminate use of long.
get_bits: make cache unsigned to eliminate undefined signed overflow.
asfdec: fix assert failure on invalid files
avfilter: check malloc return values.
Not pulled as reason for reindent is not pulled: mpegvideo: reindent.
nutenc: check malloc return values.
Not pulled due to much simpler solution in ffmpeg *: don't av_malloc(0).
...
Conflicts:
doc/developer.texi
libavcodec/Makefile
libavcodec/get_bits.h
libavcodec/mpegvideo.c
libavformat/Makefile
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f8bed30d8b. The reason
for this is that the overlap filter, which runs after IDCT, should run
on unclamped values, and thus IDCT and put_pixels() cannot be merged if
we want to attempt to be bitexact.
* qatar/master:
avio: add more documentation for AVIOContext.
Parse sprite data for WMVP and WVP2, and decode sprites for the latter
Replace outdated info on the FAQ
Redefine sameq
pad: fix example explanation
gradfun: add notice from the MPlayer manual
eval: add support for trunc, ceil, and floor functions
documentation: add setdar and setsar description to filters.texi
avio: document some members of AVIOContext.
avio: document avio_close().
avio: cosmetics, vertically align comments.
avio: cosmetics, group the reading functions.
avio: cosmetics, merge all the FF_API_OLD_AVIO blocks.
avio: cosmetics, move AVIOContext to start of the file.
avio: update file header.
os: fix OpenBSD/PowerPC compilation
pixfmt: add PIX_FMT_BGR48LE and PIX_FMT_BGR48BE
oggdec: fix demuxing chained audio streams
fix typo
Conflicts:
doc/filters.texi
libavformat/avio.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The attached patch fixes the jerky playback of VC-1 content with pulldown. The pulldown flags were incorrectly set. They must be correct in order to display the frames with the correct timing as mentioned in the specifications: "SMPTE 421M: VC-1 Compressed Video Bitstream Format and Decoding Process". More precisely the following tables:
Table 20: Progressive P picture layer bitstream for Advanced Profile
Table 22: Progressive B picture layer bitstream for Advanced Profile
Table 23: Progressive Skipped picture layer bitstream for Advanced Profile
Table 82: Interlaced Frame I and BI picture layer bitstream for Advanced Profile
Table 83: Interlaced Frame P picture layer bitstream for Advanced Profile
Table 84: Interlaced Frame B picture layer bitstream for Advanced Profile
Table 85: Picture Layer bitstream for Field 1 of Interlace Field Picture for Advanced Profile
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master: (33 commits)
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
Add kbdwin.o to AC3 decoder
Detect byte-swapped AC-3 and support decoding it directly.
cosmetics: indentation
Always copy input data for AC3 decoder.
ac3enc: make sym_quant() branch-free
cosmetics: indentation
Add a CPU flag for the Atom processor.
id3v2: skip broken tags with invalid size
id3v2: don't explicitly skip padding
Make sure kbhit() is in conio.h
fate: update wmv8-drm reference
vc1: make P-frame deblock filter bit-exact.
configure: Add the -D parameter to the dlltool command
amr: Set the AVFMT_GENERIC_INDEX flag
amr: Set the pkt->pos field properly to the start of the packet
amr: Set the codec->bit_rate field based on the last packet
rtsp: Specify unicast for TCP interleaved streams, too
Set the correct target for mingw64 dlltool
applehttp: Change the variable for stream position in seconds into int64_t
...
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/ac3dec.c
libavformat/avio.h
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Merging these functions allows merging some loops, which makes the
results (particularly after SIMD optimizations) much faster.
(cherry picked from commit f8bed30d8b)
In all 3 cases, the decoding continues and thus a warning would be sufficient.
Helps application that catch them with own log handers to handle them
accordingly.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit ae2104791f)
