This fixes speex in rtmp
Fixes Ticket2409
the nellymoser in flv case actually needs larger analyzeduration. The code
previously just failed to calculate the duration
If this causes any problems, like premature analyze/probe end, please report!
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6516632967da5e6bd7d6136e8678f826669ed26e':
tests: Only run noproxy test if networking is enabled
fifo: K&R formatting cosmetics
Conflicts:
libavformat/Makefile
libavutil/fifo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When operating on subsampled chroma planes, some rounding is taking
place. The left and top borders are rounded down while the width and
height are rounded up, so all rounding is done outward to guarantee the
logo area is fully covered.
The problem is that the width and height are counted from the
unrounded left and top borders, respectively. So if the left or top
border position has indeed been rounded down, and the width or height
needs no rounding (up), the position of the the right or bottom border
will be effectively rounded down, i.e. inward.
The issue can easily be seen with a yuv240p input and
-vf delogo=45:45:60:40:show=1 -vframes 1 delogo-bug.png
(or virtually any logo area with odd x and y and even width and
height.) The right and bottom chroma borders (in green) are clearly
off.
In order to fix this, the width and height must be adjusted to include
the bits lost in the rounding of the left and top border positions,
respectively, prior to being themselves rounded up.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The original delogo algorithm interpolates both horizontally and
vertically and uses the average to compute the resulting sample. This
works reasonably well when the logo area is almost square. However
when the logo area is significantly larger than high or higher than
large, the result is largely suboptimal.
The issue can be clearly seen by testing the delogo filter with a fake
logo area that is 200 pixels large and 2 pixels high. Vertical
interpolation gives a very good result in that case, horizontal
interpolation gives a very bad result, and the overall result is poor,
because both are given the same weight.
Even when the logo is roughly square, the current algorithm gives poor
results on the borders of the logo area, because it always gives
horizontal and vertical interpolations an equal weight, and this is
suboptimal on borders. For example, in the middle of the left hand
side border of the logo, you want to trust the left known point much
more than the right known point (which the current algorithm already
does) but also much more than the top and bottom known points (which
the current algorithm doesn't do.)
By properly weighting each known point when computing the value of
each interpolated pixel, the visual result is much better, especially
on borders and/or for high or large logo areas.
The algorithm I implemented guarantees that the weight of each of the
4 known points directly depends on its distance to the interpolated
point. It is largely inspired from the original algorithm, the key
difference being that it computes the relative weights globally
instead of separating the vertical and horizontal interpolations and
combining them afterward.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tha fate tests change because the edge mirroring was wrong before this commit
Reviewed-by: Nicolas BERTRAND <nicoinattendu@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adding an arbitrary amount of padding bytes at the end of the
ID3 metadata fixes cover art display for some software (iTunes,
Traktor, Serato, Torq).
For reference (ID3 metadata):
[ Apic frames ] -> cover doesn't show up
[ Apic frames, Padding ] -> ok
[ Apic frames, ID3 frames ] -> ok
[ ID3 frames, Apic frames ] -> cover doesn't show up
[ ID3 frames, Apic frames, Padding ] -> ok
* qatar/master:
doc: Mention the target_samples and ld variables for fate configs
fate.sh: Allow specifying --as via a specific variable
Conflicts:
doc/fate.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4a27a52a1f74016095b7aee1b4a422cf62217ade':
fate: Don't use files from SRC_PATH in the actual tests
indeo4: reuse context block VLC for band instead of defaulting
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The quantization code needs more work, not so much work
merging but more work investigating what is correct.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If building out of tree, make sure the filter scripts are copied
into the build tree before running tests. This makes sure that
SRC_PATH doesn't need to exist on the remote system (or doesn't
need to exist at the same path).
Signed-off-by: Martin Storsjö <martin@martin.st>
This more evenly distributes the load between threads
This also fixes the chroma filtering where the filter was applied twice
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array writes
No FFmpeg release is affected by this
This also fixes some artifacts
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the "build_only" variable is set in the configuration file, the
FATE client will skip running tests and just compile all targets.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8e673efc6f5b7a095557664660305148f2788d30':
prores: update FATE test to account for alpha plane present in the test sample
configure: Add basic valgrind-massif support
Conflicts:
tests/fate/prores.mak
tests/ref/fate/prores-alpha
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by ffmpeg state
that they are 'piff' compatible via 'ftyp' box, this needs to be corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup.
This should also fix I/BI field pictures.
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs.
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e0c53c3408181d2e7d544eb65fc7355a79438dfe':
nut: use meaningful error values
FATE: use a less ambiguous end time for filter-trim-time test
Conflicts:
libavformat/nutdec.c
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is the first 2 MB of the official test7.mkv.
That length seems to be enough to detect the bugs
we had in our code so far.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit '768e44d044bc32de1e58c198a3708d186af7e966':
build: tune down the output of lcov/gcov
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b333f3a22a4db4cf65d6a0457ac82ecbe7c7ac44':
lavf-regression: use -frames instead of -t for image tests
Conflicts:
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
${1} is now the filter args and is inappropriate as a unique name for
the test (and causes some FATE issues because of the ':' in them).
${filter} is not used either to replace the ${1} because ${outfile}
already contains a unique name for the test.
* commit 'e036bb7899d0faca9159206be9bf5552e76e7633':
lavc: clear AVBuffers on decoded frames if refcounted_frames is not set
FATE: add an additional indeo3 test
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes -t sample-accurate for audio and will allow further
simplication in the future.
Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
* qatar/master:
x86: ac3dsp: Remove 3dnow version of ff_ac3_extract_exponents
Conflicts:
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The function requires increasing the fuzz factor for the ac3/eac3 encode
tests and even so makes fate fail. It only provides a slight encoding
speedup for legacy CPUs that do not support SS2. Thus its benefit is not
worth the trouble it creates and fixing it would be a waste of time.
Most formats do not support negative timestamps, shift them to avoid
unexpected behaviour and a number of bad crashes.
CC:libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The sample is already included in the FATE suite, but is not tested
because cropping wasn't fully supported before.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avcodec: Bump minor for JPEG 2000 decoder
JPEG 2000 decoder for DCinema
The mqc code is merged, the rest is added independent of
the existing jpeg2000 decoder and encoder.
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/mqc.c
libavcodec/mqc.h
libavcodec/mqcdec.c
libavcodec/version.h
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* commit '9bfc6e02bae9de354fb9ba09a8a140e83eeadf7d':
afifo: fix request_samples on the last frame in certain cases
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The current code can fail to return the last frame if it contains
exactly the requested number of samples.
Fixes the join filter test, which previously did not include the last
408 samples in most cases.
CC:libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
fate: cosmetics: More sensible order for entries in video filter file
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a77aed142cade3beb0cd43f879d4f47daae23b8a':
fate: Rename video filters file and add separate video filters target
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b357f1d1d3dd1d6672df6a397a31be425d31b6d1':
fate: Split audio filters into their own separate file
Conflicts:
tests/Makefile
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To define accurately the delay between two frames, it is necessary to
have both available. Before this commit, the first frame had a delay of
0; while in practice the problem is not visible in most situation, it is
problematic with low frame rate and large scene change.
This commit notably fixes output generated with commands such as:
ffmpeg -i big_buck_bunny_1080p_h264.mov
-vf "select='gt(scene,0.4)',scale=320:-1,setpts=N/TB"
-frames:v 5 -y out.gif
Also, to avoid odd loop delays, the N-1 delay is duplicated for the last
frame.
The encoder now doesn't produce any extra graphic control extension
block anymore. Only the image is encoded, and the muxer writing
its own GCE containing notably the timing information now includes the
optional palette transmitted through packet side data.
This commit avoid setting clashes between the two GCE, and reduce the
size of the generated file with pal8 output.
This commit removes the badly duplicated code between the encoder and
the muxer. That may sound surprising, but the encoder is now responsible
from the encoding of the picture when muxing to a .gif file. It also
does not require anymore a manual user intervention such as a -pix_fmt
rgb24 to work properly. To summarize, output gif are now easier to
generate, code is saner and simpler, and files are smaller (thanks to
the lzw encoding which was unused so far with the default .gif output).
We can certainly make things even better, but this is the first step.
FATE is updated because of the output being produced by the encoder and
not the muxer (no lzw in the muxer), and in the seek test only the size
mismatches.
Fixes Ticket #2262
* qatar/master:
FATE: add a test for the interlace filter
lavfi: new interlace filter
Conflicts:
Changelog
configure
doc/filters.texi
libavfilter/Makefile
libavfilter/allfilters.c
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using the first names of authors sounds somewhat unprofessional
and might be considered offensive which is not intended.
The new names use the initials of the authors due to simplicity
and the possibility to apply it consistently without the need
to find political correct names for each future case where
alternative codecs might exist. Also its shorter ...
If someone has a better idea, like maybe 2 random letters
and people prefer it then iam happy to switch to that ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Text subtitles packets are not 0-terminated (and if they are,
it is handled by the recoding process since 0 is a valid
Unicode code point). The terminating 0 would overwrite the
last payload octet.
OTOH, packets must be 0-padded.
Fix a problem reported in trac ticket #2431.
The gcov/lcov are a common toolchain for visualizing code coverage with
the GNU/Toolchain. The documentation and implementation of this
integration was heavily inspired from the blog entry by Mike Melanson:
http://multimedia.cx/eggs/using-lcov-with-ffmpeg/
* qatar/master:
fate: add an option to generate the references
Conflicts:
doc/fate.texi
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vmdav: convert to bytestream2
FATE: add a test for the join filter
FATE: add a test for the volume filter
Conflicts:
libavcodec/vmdav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '43a8333a16c796b3d855fb3aaa742103cb62731f':
FATE: add a test for the channelsplit filter
FATE: add a test for the channelmap filter
FATE: add a test for the negate filter
FATE: add a test for the overlay filter
Conflicts:
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ea290d919a52f0f8c7e30d69328bb011ed13f61a':
FATE: add a test for the setpts filter
FATE: add a test for the hqdn3d filter
FATE: add a test for the transpose filter
FATE: add a test for the unsharp filter
Conflicts:
tests/ref/fate/filter-hqdn3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1a6d4bd7b60761bd7d955011ce7df4dd6b87b497':
FATE: add a test for the fade filter
FATE: add a test for the drawbox filter
FATE: add a test for the boxblur filter
FATE: add a test for the gradfun filter
Conflicts:
tests/fate/filter.mak
tests/ref/fate/filter-gradfun
our gradfun test is renamed to gradfun-ubitux as its name conflicts and
it was requested to be kept. Feel free to rename, change, finetune ...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1ae44c87c924b69a0657256fbaa8ad140df2f27c':
lavfi/gradfun: remove rounding to match C and SSE code.
lavfi/gradfun: fix dithering in MMX code.
lavfi/gradfun: fix rounding in MMX code.
lavfi/gradfun: do not increment DC pointer for odd values.
fate: filter: Add dependencies
avconv: add options for reading filtergraphs from a file.
Conflicts:
Changelog
doc/ffmpeg.texi
doc/filters.texi
ffmpeg.h
ffmpeg_opt.c
libavfilter/vf_gradfun.c
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Except for the vintage preset, the values are defined by Lou Logan based
on the ones found in Adobe Photoshop CS6.
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
The partial frames leak a few uninitialized pixels through
due to incomplete interlaced error concealment support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '666fe5da47d127074be7f0e2bac93db6af8b4a30':
atomic: Exclude the unsupported implementation headers from checkheaders
avconv: do not silently ignore unused codec AVOptions.
Conflicts:
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6deae8e0530a885b76f149841ed4899cb438ec23':
FATE: remove the -dct option from some decoding tests.
avconv: use a local variable for InputFile in open_input_file().
Conflicts:
tests/fate/microsoft.mak
tests/fate/real.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3e2f200237af977b9253b0aff121eee27bcedb44':
roqvideodec: fix a potential infinite loop in roqvideo_decode_frame().
xxan: fix invalid memory access in xan_decode_frame_type0()
tty: set avg_frame_rate.
FATE: enable multiple slices in the ffv1 vsynth test
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2eba9087f3031c6050f8dcd996225490be6c2410':
lavc: make up a fake frame channel layout when there is no real one.
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '65f1d45dcc71186ede72fff950996099d23359bd':
lavu: add support for atomic operations.
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These could be used for reference counting, or for keeping track of
decoding progress in references in multithreaded decoders.
Support is provided by gcc/msvc/suncc intrinsics, with a fallback using
pthread mutexes.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When parsing the Xing/Info tag, don't set the bit rate if it's an Info tag.
When parsing the stream, don't override the bit rate if it's already set,
otherwise calculate the mean bit rate from parsed frames. This way, the bit
rate will be set correctly both for CBR and VBR streams.
Signed-off-by: Alexander Kojevnikov <alexander@kojevnikov.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '813b82b927b19532e3bc3397b972c8a27b9f6326':
configure: Fix silly typo in logging command of check_struct()
fate: remove last incomplete frame from mpeg2-field-enc test
Conflicts:
tests/fate/video.mak
tests/ref/fate/mpeg2-field-enc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: Add a fate test for the noproxy pattern matching
lavf: Handle the environment variable no_proxy more properly
Conflicts:
libavformat/Makefile
libavformat/internal.h
libavformat/tls.c
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new code is also faster and more robust.
As for the performance:
old decoder + conversion to rgb: fps = 2618
old decoder, without converting to rgb: fps = 4012
new decoder, producing rgb: fps = 4502
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Other software does not store it in this case, and the information
is provided by the codec stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The QuickTime specification does not contain any hint that the atom
must not be written in some cases and both the QuickTime and the
AVID decoders do not fail if the atom is present.
This change allows to signal (visually) interlaced streams with
a codec different from uncompressed video.
As a side-effect, this fixes ticket #2202
Matroska specification lists support for BlockAdditional element
which is not supported by ffmpeg's matroska parser. This patch
adds grammar definitions for parsing that element (and few other
related elements) and then puts the data in AVPacket.side_data
with new AVPacketSideDataType AV_PKT_DATA_MATROSKA_BLOCKADDITIONAL.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts parts of d6d5ef5534, that didn't work right. (The
tests that were added failed on big endian, and the output looked
garbled on little endian as well.)
This is due to the fact that the intermediate scaling values (from
e.g. hScale8To19_c or hScale16To19_c) are stored as int32_t and
thus requires a separate output function, while yuv2gbrp_full_X_c
only interprets it as int16_t.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '81726a4f0b8a43e19898e2a36fdde80583bafff0':
FATE: add tests for additional flavors of asf cover art
asfdec: do not assume every AVStream has a corresponding ASFStream
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup
This should also fix I/BI field pictures
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dff6197dfb9b2d145729885c63f865c5fdd184aa':
nuv: do not rely on get_buffer() initializing the frame.
yop: initialize palette to 0
Conflicts:
libavcodec/nuv.c
tests/ref/fate/nuv-rtjpeg-fh
tests/ref/fate/yop
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cd4068071b9a8908823a3107f97e938211045ce':
fraps: fix off-by one bug for version 1.
Conflicts:
libavcodec/fraps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '238614de679a71970c20d7c3fee08a322967ec40':
cdgraphics: do not rely on get_buffer() initializing the frame.
svq1: replace struct svq1_frame_size with an array.
vf_yadif: silence a warning.
Conflicts:
libavcodec/svq1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The FATE sample contains some pixels with value 0, but the palette
stored in the file contains only values from 16 up. Because the default
and cmdutils get_buffer() initialize the data to 0x80, they appear as
gray dots.
After this commit they change to black dots, which is probably still
incorrect but less visible and doesn't rely on get_buffer() initializing
the data.
We have to make some symetric changes elsewhere as this increases
the precission with which samples are stored.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69c25c9284645cf5189af2ede42d6f53828f3b45':
dnxhdenc: fix invalid reads in dnxhd_mb_var_thread().
x86: h264qpel: Move stray comment to the right spot and clarify it
atrac3: use correct loop variable in add_tonal_components()
Conflicts:
tests/ref/vsynth/vsynth1-dnxhd-1080i
tests/ref/vsynth/vsynth2-dnxhd-1080i
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce378f0dd0c4e5350b3280e6b3e8d6b46fe4b0a3':
fate: Use wmv2 IDCT for wmv2 tests
vorbisdsp: change block_size type from int to intptr_t.
Conflicts:
tests/fate-run.sh
tests/fate/vcodec.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6bc38fd49c94726b45d5d5cc2b756ad8ec49ee0':
wmv2: move IDCT to its own DSP context.
Conflicts:
libavcodec/dsputil.h
tests/ref/seek/vsynth2-wmv2
tests/ref/vsynth/vsynth1-wmv2
tests/ref/vsynth/vsynth2-wmv2
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8a4f26206d7914eaf2903954ce97cb7686933382':
dsputil: remove butterflies_float_interleave.
srtp: Move a variable to a local scope
srtp: Add tests for the crypto suite with 32/80 bit HMAC
Conflicts:
libavcodec/x86/dsputil.asm
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use a noise range of -0.707 to 0.707 instead of -0.5 to 0.5
Based on patch by: Mathias Rauen <madshi@gmail.com> and commit by Justin Ruggles (04ea5491)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows us to remove FF_IDCT_WMV2, which serves no practical purpose
other than to be able to select the WMV2 IDCT for MPEG (or vice versa)
and get corrupt output.
Fate tests for all wmv2-related tests change, because (for some obscure
reason) they forced use of the MPEG IDCT. You would get the same changes
previously by not using -idct simple in the fate test (or replacing it
with -idct auto).
* commit '0eecafc948b74c247ebbc59f18f508db5d590d0b':
configure: Make the new srtp protocol depend on the rtp protocol
lavf: Add a fate test for the SRTP functions
lavu: Add a fate test for the HMAC API
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'abae27ed3acd0a7c54f11760c5be2d2653c4edf8':
rtpdec: Fix the calculation of expected number of packets
fate: vp3: Fix fate-vp3-coeff-level64 test dependencies
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d3b144c5ea824193019019d33740a1ae9e0bb69':
fate: cosmetics: Order some test entries
Conflicts:
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec86ba57312745fd7ad9771e3121e79c6aacba30':
vp3: Fix double free in vp3_decode_end()
fate: Split fate-siff test into demuxer and VB video decoder test
Conflicts:
tests/fate/demux.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add some additional checks for EOF and print error messages on an incomplete
header or packet.
FATE reference updated for id-cin-video due to the demuxer no longer
returning a partial video packet at EOF.
The filter has been added recently and does not yet pass tests on all platforms.
It should not be included in the tests in the release until it works.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The filter has been added recently and does not yet pass tests on all platforms.
It should not be included in the tests in the release until it works.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a port of virtual dub's histogram equalization filter by Donald
A. Graft. Based on the work by Jérémy Tran <tran.jeremy.av@gmail.com>,
done for SOCIS 2012.
This is a port of the kerndeint filter (libmpcodecs/vf_kerndeint) by
Donal A. Graft (original avisynth plugin author), and is based on the
work by Jérémy Tran <tran.jeremy.av@gmail.com> done for SOCIS 2012.
Force commands to specify the name of the test to run. This simplifies
extending the function with a new parameter, which will be done in a
following patch.
After making some blind tests on a small collection of music
samples for home usage. It turned out that the default cutoff
was too low.
The impact of filter_size was not clearly distinguishable (the
results were on the edge) with the music samples but turned out
to be clearly audible in some synthetic samples.
Thanks to Daniel for helping out with the listening tests.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Some of the filters tests use globbing characters, especially
brackets for filter pad labels. While most of these strings
are way too complicated to ever match an existing file name
and are therefore kept unchanged in the command line (an old
misfeature of the shell language that happens to be convenient
here), at least one use is simple enough to match random files
lying in the current directory. If that happens, the string,
that was meant to be kept verbatim, is replaced by the file
name, and that causes the test to fail (or worse).
The data does not contain timing or trailing line breaks anymore. In
addition to being less idiotic, it is consistent with other codecs and
thus allows more switches between formats and codecs. It also fixes the
issue of the trailing line returns being simple \n instead of CRLF in
the ASS rectangle dialogue (this is the reason of the FATE update).
* commit '5e6ee38bd3cef0dd05f1dd7977c71f3479eb6d01':
FATE: add cavs test
cavsdec: export picture type in the output frame
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current MicroDVD AVPackets contain timing information and trailing line
breaks. The data is now only composed of the markup data. Doing this
consistently between text subtitles decoders allows to use different
codec for various formats. For instance, MicroDVD markup is sometimes
found in some VPlayer files. Also, generally speaking, the subtitles
text decoders have no use of these timings (and they must not use them
since it would break any user timing adjustment).
Technically, this is a major ABI break. In practice, a mismatching
lavf/lavc will now error out for MicroDVD decoding. Supporting both
formats requires unnecessary complex and fragile code.
FATE needs update because line breaks in the ASS file were "\n" (because
that's what is used in the original file). ASS format expect "\r\n" line
breaks; this commit fixes this issue. Also note that this "\r\n"
trailing need to be moved at some point from the decoders to the ASS
muxer.
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
The SRT muxer is reponsible for separating events with two line breaks,
there is no need to add more than necessary. Similarly, other muxers
(such as Matroska) are not supposed to add line breaks at the end of the
payload.
Since 83cab07 audio stream time bases are based on SampleRate, not EditRate.
This fixes trac ticket #2029 and a few seeking issues.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Do not overwrite linesize set by get_buffer().
The last frame in the FATE test is not decoded anymore, since the file
is cut and a part of it is missing.
Ported from MPlayer. Original author is A'rpi, with various
contributions from Michael Niedermayer. The original documentation was
mostly written by Diego Biurrun. See the MPlayer history for full
credits.
The filter is under GPL like the original filter, even if it differs
quite a lot. There is not much point in making it LGPL since pp is under
GPL.
* commit 'c35f0e8495e34c2082dcde805e9323c9f6a4cb0a':
au: Reorder code so that both muxer and demuxer are under #ifdefs
fate: Move RALF test into lossless audio group
cosmetics: Use consistent names for multiple inclusion guards.
Conflicts:
libavformat/au.c
tests/fate/lossless-audio.mak
tests/fate/real.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The initial testing of the VFW binary codec was flawed,
likely due to an AviSynth bug.
Re-testing using VirtualDub and various professional editing
applications has revealed it should have been flipped.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '9d5c62ba5b586c80af508b5914934b1c439f6652':
lavu/opt: do not filter out the initial sign character except for flags
eval: treat dB as decibels instead of decibytes
float_dsp: add vector_dmul_scalar() to multiply a vector of doubles
Conflicts:
libavutil/eval.c
tests/ref/fate/eval
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: workaround for slighly broken 'test' shell builtin
mimic: initialize padding of swap_buf through av_fast_padded_malloc
eamad: initialize padding of bitstream_buf through av_fast_padded_malloc()
raw demuxer: initialize end of partial packets
Conflicts:
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some shells, e.g. minix3, have a broken 'test' builtin which fails
if the first operand of a binary operator looks like a unary operator.
Prefixing the values with 'x' prevents this from happening.
Signed-off-by: Mans Rullgard <mans@mansr.com>
It is broken, and results will be messed up when seeking.
This also fix duration displayed for streams when using -c copy.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* qatar/master:
ppc: always use pic for shared libraries
build: cosmetics: Move CONFIG_RTPDEC entry to a more suitable place
fate: ea, h264: prettyprinting and ordering cosmetics
Conflicts:
tests/fate/ea.mak
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fft: Fix libavcodec dependency
build: Make the ISMV muxer select the MOV muxer
configure: move arm arch extensions to a separate variable
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e816034a5fa131b13c4ad87bb0b5065b4f5697c6':
fate-seek: remove use of gnu make 3.82 only private modifier
fate: move vsynth reference files to their own directory
fate: move fate-acodec reference files to their own dir
configure: avplay now depends on avresample
fate: split dependencies for fate-seek tests
Conflicts:
configure
tests/fate/seek.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Each fate-seek test depends now only on the corresponding fate-acodec,
fate-vsynth2 or fate-lavf test which creates the file seek-tests
operates on. The tests and references are renamed to match the test they
depend on.
Without this exception files with ".gif" extension by default
recognized as input suitable for image2 demuxer rather than gif.
In order to pass image through gif demuxer it was necessary
to use -f gif option.
This change affected 'make fate' test results because previously
image2 demuxer and gif decoder took only first frame of multiframe
test data, which is no longer true with gif demuxer.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
* commit 'e4d349b4014ee2a03f521027e0bd1ace4a9e60bd':
fate: h264: Add dependencies
fate: ea: Add dependencies
fate: Do not unconditionally run libavutil tests
rtpenc_chain: Remove unused variable
nuv: check for malloc failure when allocating extradata
nuv: use the stream indices generated by avformat_new_stream()
Conflicts:
tests/fate/ea.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new code reads the input frame when its ready, the previous
code did read the input frame during start_frame at which point it
may not yet be available.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The following commit will make it useless.
The crop_scale_vflip FATE test changes because of off-by-one differences
in output when vflipped slices are passed to sws.
This fixes correctly storing and identifying PCM in nut.
Based on patch by Luca Barbato
Found-by: durandal_1707
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add a bink version 'b' test
FATE: add a bink version 'i' test
libswscale: remove unnecessary direct #if LIBSWSCALE_VERSION_MAJOR
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b4296f41473a5b39e84d7a49d480624c9c60040':
avformat: clarify stream id for muxing
fate: Add dependencies for aac, alac, amrnb, amrwb, atrac tests
ppc: do not pass redundant compiler flags
avutil: change GET_UTF8 to not use av_log2()
segment: fix NULL pointer dereference in seg_write_header()
Conflicts:
tests/fate/aac.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This remove the owner, group and permission preservation on fatesample checkouts
These caused problems for durandal_1707
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: atrac: Place atrac1 and atrac3 tests in different groups
fate: aac: cosmetics: Group AAC LATM tests together
x86: avresample: Add missing colons to assembly labels
Conflicts:
tests/fate/aac.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add a 24-bit FLAC encoding test
FATE: rename FLAC tests from flac-* to flac-16-*
flacenc: use RICE2 entropy coding mode for 24-bit
flacenc: add 24-bit encoding
flacdsp: move lpc encoding from FLAC encoder to FLACDSPContext
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5ff998a233d759d0de83ea6f95c383d03d25d88e':
flacenc: use uint64_t for bit counts
flacenc: remove wasted trailing 0 bits
lavu: add av_ctz() for trailing zero bit count
flacenc: use a separate buffer for byte-swapping for MD5 checksum on big-endian
fate: aac: Place LATM tests and general AAC tests in different groups
build: The A64 muxer depends on rawenc.o for ff_raw_write_packet()
Conflicts:
doc/APIchanges
libavutil/version.h
tests/fate/aac.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently FFM files generated with one versions of ffmpeg generally
cannot be read by another.
By spliting data into chunks, more fields can saftely be appended to
chunks as well as new chunks added.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise during scaling it will try to interpret input in the wrong way and
that leads to the test results disagreeing on different platforms and with
different optimizations.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
pixfmt: support more yuva formats
swscale: support gray to 9bit and 10bit formats
configure: rewrite print_config() function using awk
FATE: fix (AD)PCM test dependencies broken in e519990
Use ptrdiff_t instead of int for intra pred "stride" function parameter.
x86: use PRED4x4/8x8/8x8L/16x16 macros to declare intrapred prototypes.
Conflicts:
libavcodec/h264pred.c
libavcodec/h264pred_template.c
libavutil/pixfmt.h
libswscale/swscale_unscaled.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '14f031d7ecfabba0ef02776d4516aa3dcb7c40d8':
dv: use AVStream.index instead of abusing AVStream.id
lavfi: add ashowinfo filter
avcodec: Add a RFC 3389 comfort noise codec
lpc: Add a function for calculating reflection coefficients from samples
lpc: Add a function for calculating reflection coefficients from autocorrelation coefficients
lavr: document upper bound on number of output samples.
lavr: add general API usage doxy
indeo3: remove duplicate capabilities line.
fate: ac3: Add dependencies
Conflicts:
Changelog
doc/filters.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/af_ashowinfo.c
libavfilter/allfilters.c
libavfilter/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '381dc1a5ec0925b281c573457c413ae643567086':
fate: ac3: Place E-AC-3 tests and AC-3 tests in different groups
fate: Add shorthands for acodec PCM and ADPCM tests
avconv: Drop unused function argument from do_video_stats()
cmdutils: Conditionally compile libswscale-related bits
aacenc: Drop some unused function arguments
rtsp: Avoid a cast when calling strtol
nut: support textual data
nutenc: verbosely report unsupported negative pts
Conflicts:
cmdutils.c
ffmpeg.c
libavformat/nut.c
libavformat/nutenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec444c84cfd30ef34a4e7b4ec7ee77d7e5250d25':
mpegaudiodec: Fix buffer handling on random access
mpegaudio: Refactor mp3on4 flush function
fate: Add dependencies for audio tests
fate: cosmetics: Group idct8x8 test together with all other libavcodec tests
fate: More fine-grained dependencies for libavcodec test programs
Conflicts:
tests/fate/audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This causes make to exit with an error message if a nonexistent
dependency is specified rather than silently dropping the test.
Signed-off-by: Mans Rullgard <mans@mansr.com>
FATE_SAMPLES_FFPROBE is a different list than FATE_FFPROBE, the same way
FATE_SAMPLES_FFMPEG is a different list than FATE_FFMPEG; these
FATE_SAMPLES_<tool> lists are in the FATE_EXTERN list, which is only
used when SAMPLES is set.
* commit 'c9ef43215c7d68c2cdcdbe02287aa114f27a32ed':
fate-vc1: add dependencies
ARM: fix overreads in neon h264 chroma mc
rtsp: Make sure the ret variable is initialized in ff_rtsp_fetch_packet
gitignore: ignore files created by msvc
fate: Add proper dependencies for the tests in video.mak
configure: Disable Snow decoder and encoder by default
lzo: Drop obsolete fast_memcpy reference
build: Drop OBJS declaration for non-existing PCM_DVD encoder
mpeg4videodec: Disable frame multithreading for GMC, its not implemented at all
Conflicts:
libavcodec/mpegvideo.c
libavformat/rtsp.c
tests/fate/microsoft.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Add proper dependencies in qt.mak
fate: Add proper dependencies in lossless-video.mak
indeo3: do not try to output more lines than we can fit
bmv: get a new frame on every decode_frame(), so we can use direct rendering
Conflicts:
libavcodec/bmv.c
tests/fate/lossless-video.mak
tests/fate/qt.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1cd432e167b1a80853760c89a33606e2b5f229c2':
configure: fix libcdio check
rtsp: Allow setting the reordering buffer size via an AVOption
rtsp: Vertically align a constant definition
rtp: Update the check for distinguishing between RTP and RTCP
aac: fix build with hardcoded tables
fate: dependencies for screen codec tests
riff: Move functions around to be covered by appropriate #ifdefs
Conflicts:
configure
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0329748b04e1f175dad8c9c2ebf22a5e2dc5b72':
fate: add a dependency helper macro
Add support for building shared libraries with MSVC
avcodec: Rename avpriv_frame_rate_tab to ff_mpeg12_frame_rate_tab
gxf: Add a local copy of the relevant parts of the frame rate table
configure: Split out msvc as a separate target OS
aviobuf: Remove a senseless ifdef in avio_seek
Conflicts:
configure
libavcodec/dirac.c
libavcodec/mpeg12data.h
libavcodec/mpeg12enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
