read_sequence_header can change width/height; therefore, re-initialize
all tables if width/height changed
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master: (23 commits)
doc: Check standalone compilation before submitting new components.
Fix standalone compilation of pipe protocol.
Fix standalone compilation of ac3_fixed encoder.
Fix standalone compilation of binkaudio_dct / binkaudio_rdft decoders.
Fix standalone compilation of IMC decoder.
Fix standalone compilation of WTV demuxer.
Fix standalone compilation of MXPEG decoder.
flashsv: K&R cosmetics
matroskaenc: fix memory leak
vc1: make overlap filter for I-frames bit-exact.
vc1dec: use s->start/end_mb_y instead of passing them as function args.
Revert "VC1: merge idct8x8, coeff adjustments and put_pixels."
Replace strncpy() with av_strlcpy().
indeo3: Eliminate use of long.
get_bits: make cache unsigned to eliminate undefined signed overflow.
asfdec: fix assert failure on invalid files
avfilter: check malloc return values.
Not pulled as reason for reindent is not pulled: mpegvideo: reindent.
nutenc: check malloc return values.
Not pulled due to much simpler solution in ffmpeg *: don't av_malloc(0).
...
Conflicts:
doc/developer.texi
libavcodec/Makefile
libavcodec/get_bits.h
libavcodec/mpegvideo.c
libavformat/Makefile
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f8bed30d8b. The reason
for this is that the overlap filter, which runs after IDCT, should run
on unclamped values, and thus IDCT and put_pixels() cannot be merged if
we want to attempt to be bitexact.
* qatar/master:
ac3dec: fix processing of delta bit allocation information.
vc1: fix fate-vc1 after previous commit.
wmv3dec: fix playback of complex WMV3 files using simple_idct.
make av_dup_packet() more cautious on allocation failures
make containers pass palette change in AVPacket
introduce side information for AVPacket
Politic commits that have not been pulled:
Update regtest checksums after revision 6001dad.
Replace more FFmpeg references by Libav.
Replace references to ffmpeg-devel with libav-devel; fix roundup URL.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
PROFILE_ADVANCED doesn't set res_fasttx, so make that a special case
in the condition that decides which IDCT to use (and whether to read
coefficients transposed or not).
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
IDCT coefficients are read transposed, but simple_idct does not expect
this. Therefore, only do tranposed coefficient reading if we're not
using simple_idct.
Fixes http://forum.videolan.org/viewtopic.php?f=14&t=89651
* qatar/master:
avio: add more documentation for AVIOContext.
Parse sprite data for WMVP and WVP2, and decode sprites for the latter
Replace outdated info on the FAQ
Redefine sameq
pad: fix example explanation
gradfun: add notice from the MPlayer manual
eval: add support for trunc, ceil, and floor functions
documentation: add setdar and setsar description to filters.texi
avio: document some members of AVIOContext.
avio: document avio_close().
avio: cosmetics, vertically align comments.
avio: cosmetics, group the reading functions.
avio: cosmetics, merge all the FF_API_OLD_AVIO blocks.
avio: cosmetics, move AVIOContext to start of the file.
avio: update file header.
os: fix OpenBSD/PowerPC compilation
pixfmt: add PIX_FMT_BGR48LE and PIX_FMT_BGR48BE
oggdec: fix demuxing chained audio streams
fix typo
Conflicts:
doc/filters.texi
libavformat/avio.h
libavutil/pixfmt.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pulldown flags should be communicated to the client of the libavcodec library. Not doing so causes jerky playback with pulldown content. Note that this change requires the patch previously provided here: http://ffmpeg.org/pipermail/ffmpeg-devel/2011-April/110314.html
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master: (33 commits)
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
Add kbdwin.o to AC3 decoder
Detect byte-swapped AC-3 and support decoding it directly.
cosmetics: indentation
Always copy input data for AC3 decoder.
ac3enc: make sym_quant() branch-free
cosmetics: indentation
Add a CPU flag for the Atom processor.
id3v2: skip broken tags with invalid size
id3v2: don't explicitly skip padding
Make sure kbhit() is in conio.h
fate: update wmv8-drm reference
vc1: make P-frame deblock filter bit-exact.
configure: Add the -D parameter to the dlltool command
amr: Set the AVFMT_GENERIC_INDEX flag
amr: Set the pkt->pos field properly to the start of the packet
amr: Set the codec->bit_rate field based on the last packet
rtsp: Specify unicast for TCP interleaved streams, too
Set the correct target for mingw64 dlltool
applehttp: Change the variable for stream position in seconds into int64_t
...
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/ac3dec.c
libavformat/avio.h
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Advantage is that it allows us to combine several loops into a single
one, and these can eventually be merged into the IDCT itself. Also, it
allows us to remove vc1_put_block(), and makes CODEC_FLAG_GRAY faster.
Advanced profile never uses "range reduction", so vc1_put_block() quite
literally just calls put_pixels_clamped() from vc1_decode_i_blocks_adv().
By inlining the function, we can prevent calling IDCT8x8 if
CODEC_FLAG_GRAY is set, and we don't have to scale the coeffs in the
[0,256] range, but can instead use put_signed_pixels_clamped().
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
MPV_common_init(), so calling both is redundant and leads to memory
leaks in WMV3/VC-1 decoder. Thus use only the first function in
WMV3/VC-1 decoder initialization.
Originally committed as revision 22024 to svn://svn.ffmpeg.org/ffmpeg/trunk
search for real extradata start instead of always skipping one byte.
Patch by Andrew Dennison gmailify(${name}d, lists)
Thread: [PATCH] Fix VC1 "Incomplete extradata" for mkv files generated by eac3to
Originally committed as revision 20178 to svn://svn.ffmpeg.org/ffmpeg/trunk
VLC tables should only be initialized from one place.
This initializes/calculates more VLC tables than necessary for VC1 decoding,
but this is only done once and only a small overhead in time and space (maybe
30 kB) it seems not worth adding a separate function.
Originally committed as revision 20010 to svn://svn.ffmpeg.org/ffmpeg/trunk
These are only supposed to be called once per row, not once per macroblock.
~1.5% faster according to oprofile.
Originally committed as revision 19213 to svn://svn.ffmpeg.org/ffmpeg/trunk
~8% faster VC-1 decoding.
Possible future optimization: clear blocks after use instead of before, and for
DC-only blocks, only clear the DC coefficient.
Originally committed as revision 19205 to svn://svn.ffmpeg.org/ffmpeg/trunk
Includes mmx2 asm for the various functions.
Note that the actual idct still does not have an x86 SIMD implemtation.
For wmv3 files using regular idct, the decoder just falls back to simple_idct,
since simple_idct_dc doesn't exist (yet).
Originally committed as revision 19204 to svn://svn.ffmpeg.org/ffmpeg/trunk
