This mainly consists of replacing all the pointer arithmatic 'addiu'
instructions with PTR_ADDIU which will handle the differences in pointer
sizes when compiled on 64 bit mips systems.
The header asmdefs.h contains the PTR_ macros which expend to the correct mips
instructions to manipulate registers containing pointers.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There are no independant uses of mips32r2 instructions except for the
FPU parts. Due to the heavy use of mips32r2 specifc fpu extensions, I
am guessing the original author intended MIPSFPU to imply MIPS32R2 anyway.
Since these fpu instructions are available on mips64 (non-r2), enable them
there as well.
Also remove the last occurence of HAVE_MIPS32R2 (which is coupled to
HAVE_MIPSFPU anyway).
mips32r2 is left in the list of options form compatability so that using
--disable-mips32r2 doesn't break anything.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Removing these removes the dependency of this code on mips32r2 which would
allow it to be used on processors which have FPU instructions, but not r2
instructions (like the mips64el debian port for instance).
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, warn that bitrate will be clamped down to the maximum allowed.
Patch is mostly work of Kamendo2 in issue #2686, quite tested within that issue.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '25c29d32835f38cdc5f0c84fa27dfc489a228770':
libopenh264enc: Add support for building with OpenH264 1.4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to the WebP Lossless Bitstream Specification
"each transform is allowed to be used only once".
If a transform is more than once this can lead to memory
corruption.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If it doesn't fit into 12 bits it triggers an assertion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the WebP Lossless Bitstream Specification the highest
allowed value for a prefix code is 39.
If prefix_code is too large, the calculated extra_bits has an invalid
value and triggers an assertion in get_bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Regular autovariance is no longer "experimental", and a version of it with
bias towards dark scenes is now in mainline x264.
Signed-off-by: Peter Cordes <peter@cordes.ca>
* commit '25f613f8be3b51e4396b93cda131e4631ba54302':
dca: Move syncword definitions to a separate header
Conflicts:
libavcodec/dca_parser.c
libavformat/dtsdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Although the specification mandates this bit to zero, it may happen
that software tools incorrectly flip it to one, invalidating a possibly
valid stream.
Relax this restriction, by failing only when AV_EF_BITSTREAM is set.
This behaviour is similar to aac decoders in Firefox and Quicktime.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The macro is implemented as a do{}while()
enclosing this is () appears to be a GNU extension (6.1 Statements and Declarations in Expressions)
the () is also unneeded and wrong as the macro returns no
value
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes pixel values not being properly shifted in
libopenjpeg_copyto16 and libopenjpeg_copy_to_packed16 methods.
Pixel formats like xyz12le need to be shifted by AVComponentDescriptor::shift
to get the correct values.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On mips64, the registers t[4-7] do not exist. Instead of using a lot of #ifdef
or defines to handle differing register names, use variables and let GCC
allocate the registers automatically (like in the other mips assembly files).
In get_band_cost_ESC_mips, t4 and t5 were renamed to t6 and t7 to avoid a
variable name conflict.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is obviously needed for 64-bit support.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Normally the aic decoder finds the proper slice combination (multiple of
some number less than 32) but in case of odd width, it resorts to the
default values, which were actually swapped.
The number of slices is modified to account for such odd width cases.
CC: libav-stable@libav.org
This patch fixes a pointer arithmetic bug in adjust_frame_information that resulted in heavily corrupted audio when using M/S encoding. Also, a backup copy of untransformed coefficients has to be kept around or attempts at re-processing the frame (which happens when hevavily overspending bits during transients) will result in re-encoding of the coefficients and subsequent corruption of the resulting stream.
A/B testing shows the bug as corrected, but still cannot prove that M/S coding is a win at least in numbers. Limited listening tests do show improvement on M/S encoded samples in lower bitrates, but they're hidden among the other artifacts that remain to be corrected in the encoder.
Some of the regressions flagged in the report do show poor stereo image (but not buggy), so M/S encoding is clearly not good enough yet to be defaulted to auto.
In numbers, Patched against Unpatched, stereo_mode auto:
Files: 114
Bitrates: 6
Tests: 683
Serious Regressions: 0 (0%)
Regressions: 0 (0%)
Improvements: 227 (33%)
Big improvements: 92 (13%)
Worst regression - mybloodrusts.wv - 256k
- StdDev: 28.61 pSNR: -0.43 maxdiff: 1372.00
Best improvement - 60.wv - 384k
- StdDev: -369.57 pSNR: 45.02 maxdiff: -13322.00
Average - StdDev: -80.56 pSNR: 2.49 maxdiff: -8858.00
Patched against Unpatched stereo_mode ms_off shows no difference.
Patched stereo_mode auto vs Unpatched stereo_mode ms_off shows a small average improvement, just not too significant:
Serious Regressions: 0 (0%)
Regressions: 10 (1%)
Improvements: 45 (6%)
Big improvements: 2 (0%)
Worst regression - Illinois.wv - 256k
- StdDev: 33.20 pSNR: -2.03 maxdiff: 477.00
Best improvement - song_of_circomstances.flac - 384k
- StdDev: -3.97 pSNR: 7.61 maxdiff: -826.00
Average - StdDev: -10.25 pSNR: 0.20 maxdiff: -281.00
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If it doesn't fit into 12 bits it triggers an assertion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
According to the WebP Lossless Bitstream Specification the highest
allowed value for a prefix code is 39.
If prefix_code is too large, the calculated extra_bits has an invalid
value and triggers an assertion in get_bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a small change, but it does have a big impact on bit allocation.
all the regressions marked in the report have no audible
difference (I didn't check them all though), but the improvements can
be heard.
This affects mostly high bit rates. It's related to issue #2686.
In the report, A is the patched version, B is unpatched, all
comparisons show deltas in the form (A-B), so a positive pSNR delta
means a better quality in the patched version, and negative a
regression. Regressions are only considered for pSNR deltas below
-1db, they're considered serious below -6db.
All measurements were done with tiny_psnr.
The summary of the report inline for quick reading:
Files: 58
Bitrates: 6
Tests: 347
Serious Regressions: 0 (0%)
Regressions: 10 (2%)
Improvements: 54 (15%)
Big improvements: 26 (7%)
Worst regression - sine_tester.flac - 384k
- StdDev: 1.68 pSNR: -3.05 maxdiff: -178.00
Best improvement - 07 - Bound.flac - 384k
- StdDev: -1700.05 pSNR: 20.64 maxdiff: -29595.00
Average - StdDev: -55.67 pSNR: 1.20 maxdiff: -1593.00
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some files produced by the official encoder have up to 16bit of
padding instead of the expected padding to the byte.
Use a self-explanatory macro instead of a simple number.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
