This allows getting rid of quite a bit of boilerplate in depacketizers.
The default value (initializing need_parsing to 0, aka
AVSTREAM_PARSE_NONE) is the same as it is initialized to by default
in AVStream.
Signed-off-by: Martin Storsjö <martin@martin.st>
When a client behind a NAT issues a pause command, and stay paused for a
long time, the router may stop the RTP/RTCP port redirection. Resend the
hole punching packets before each PLAY command to cause the router to
restart the port redirection in that case.
Move the existing code for sending the packets from the SETUP phase
to the PLAY phase.
Signed-off-by: Martin Storsjö <martin@martin.st>
When receiving an RTCP packet, the difference between the last RTCP
timestamp and the base timestamp may be negative. As these timestamps
are of the uint32_t type, the result becomes a large integer. Cast
the difference to int32_t to avoid this issue.
The result of this issue is very large start times for RTSP
streams, and difficulty to restart correctly after a pause.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
If src_len is too small for nal_size, we already print a warning
above, and the next step is to check the while loop condition
anyway, so this one serves no purpose.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, errors were only logged but the code kept on trying,
and never actually returning the error as a return value.
Signed-off-by: Martin Storsjö <martin@martin.st>
Including libavcodec/get_bits.h is superfluous for AV_RB16 - nothing
in this file uses any actual bitstream reader.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows the output to be used with stream copy, which discards
packet from the start until the first keyframe.
Signed-off-by: Martin Storsjö <martin@martin.st>
During remuxing avcodec_copy_context() is discouraged as certain fields
(such as codec_tag) could reflect invalid values between input and
output contextes.
CTS-based seek is reasonable since player requests frames in output order
not coded order.
This change fixes seek to a keyframe within consecutive keyframes.
Let's say P[0|-1] and P[1|0], here x and y inside [x|y] are PTS and DTS
respectively, and both two frames are a keyframe. If you try to seek on
PTS=0, i.e. P[0|-1], you'll get P[1|0] if the demuxer is DTS based. This
is obviously undesirable.
Signed-off-by: Martin Storsjö <martin@martin.st>
analyze() is currently called both when probing and from read_header().
It determines the packet start by looking for the sync byte, followed by
unset Transport Error Indicator and valid adaptation_field_control.
This makes sense to do when probing, but once we already know the format
is MPEG-TS, it is counterproductive to be so strict -- e.g. in some
files the TEI might be set and analyze() might get called with a smaller
buffer than the one used for probing, resulting in a failure.
Nothing uses it, and it provides no public API.
Archeological finds:
Commit 101036adb9 added the API.
Commit a8dd8dc6e9 made mpegts.c use it.
Commit af8aae3fa3 disabled it by default in mpegts.c.
Commit ae2bb52cd2 removed all uses of this from mpegts.c.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This atom typically is used for a track title. The handler name is stored
as a Pascal string in the QT specs (first byte is the length of the string),
so do not export it.
A second length check based on the first character is added to avoid
overwriting an already specified handler_name (it happens with YouTube
videos for instance, the handler_name get masked), or specifying an
empty string metadata.
The Pascal string fix and the second length check are written
by Clément Bœsch <clement.boesch@smartjog.com>.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Trigger a refill if the seek action moves the pointer
at the end of the buffer.
Before this patch the read action following the seek would trigger
the refill, while write action would write outside the buffer.
In the Libav codebase few muxers seek forward outside of what
already has been written so it is quite unlikely to experience
the problem with the default buffer size.
CC: libav-stable@libav.org
This partially reverts cf70ba37ba, since
it didn't take into account when rotation is 0, but there is another
valid operation (eg. translation) in the matrix.
Found-by: Michael Niedermayer <michaelni@gmx.at>
This goto wasn't necessary originally, but it should have been
added when the write_manifest call was added in 8e276378.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes sending chunked packets (packets larger than the output
chunk size, which often can be e.g. 4096 bytes) with a timestamp delta
(or absolute timstamp, if it's a timestamp step backwards, or the
first packet of the stream) larger than 0xffffffff.
The RTMP spec explicitly says (in section 5.3.1.3.) that packets of
type 3 (continuation packets) should include this field, if the
previous non-continuation packet had it included.
The receiving code handles these packets correctly.
Pointed out by Cheolho Park.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
When the display matrix is not the identity one, but the rotation angle
is zero, there is no need to update the sample aspect ratio.
Otherwise, it is possible to obtain negative values which interferes
with transcoding in later stages. This kind of behaviour is reproducible
on mov files with "major_brand: MSNV".
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
A failure in segment_end() or segment_start() would lead to freeing
a dangling pointer and in general further calls to seg_write_packet()
or to seg_write_trailer() would have the same faulty behaviour.
CC: libav-stable@libav.org
Reported-By: luodalongde@gmail.com
This comment can be traced back to the initial commit from 2001,
and it seemed to be misleading/incorect already back then. (It
was used for normal, non-raw file formats already then.)
Signed-off-by: Martin Storsjö <martin@martin.st>
This should be more correct. This also should give more sensible
switching between video streams with different amount of b-frame
delay.
The current dash.js release (1.2.0) fails to start playback of
such files from the start (if the start pts is > 0), but this has
been fixed in the current git version of dash.js.
Also enable the use of edit lists, so that streams in many cases
start at pts=0.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the more generic approach with the delay_moov flag, instead of
having a update mechanism specific to this one single atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
This delays writing the moov until the first fragment is written,
or can be flushed by the caller explicitly when wanted. If the first
sample in all streams is available at this point, we can write
a proper editlist at this point, allowing streams to start at
something else than dts=0. For AC3 and DNXHD, a packet is
needed in order to write the moov header properly.
This isn't added to the normal behaviour for empty_moov, since
the behaviour that ftyp+moov is written during avformat_write_header
would be changed. Callers that split the output stream into header+segments
(either by flushing manually, with the custom_frag flag set, or by
just differentiating between data written during avformat_write_header
and the rest) will need to be adjusted to take this option into use.
For handling streams that start at something else than dts=0, an
alternative would be to use different kinds of heuristics for
guessing the start dts (using AVCodecContext delay or has_b_frames
together with the frame rate), but this is not reliable and doesn't
necessarily work well with stream copy, and wouldn't work for getting
the right initialization data for AC3 or DNXHD either.
Signed-off-by: Martin Storsjö <martin@martin.st>
If fragments == 0 it means we haven't written any moov atom yet.
If the empty_moov flag is set, we already have written an empty moov
atom at startup. Thus, the check for empty_moov is redundant.
This is in preparation for allowing writing the moov atom later,
even when using the empty moov flag.
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing an explicit time, reset the cur_time variable to this
value as well. This avoids writing excessive time attributes for each
segment in the timeline, as long as the segments are continuous.
Signed-off-by: Martin Storsjö <martin@martin.st>
The MoveFileExA is available in the headers regardless which API
subset is targeted, but it is missing in the Windows Phone link
libraries. When targeting Windows Store apps, the function is
available both in the headers and in the link libraries, and thus
there is no indication for the build system that this function
should be avoided - such an indication is only given by the
Windows App Certification Kit, which forbids using the MoveFileExA
function.
Therefore check the WINAPI_FAMILY defines instead, to figure out
which API subset is targeted.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the mpegts muxer now can handle being called with a NULL
AVIOContext, we don't need to try to allocate one before calling
write_trailer.
Signed-off-by: Martin Storsjö <martin@martin.st>
If opening and closing dynamic buffers as AVIOContext, we may
not have any AVIOContext available when wanting to close and
deallocate the muxer. Allow calling write_trailer despite this.
Signed-off-by: Martin Storsjö <martin@martin.st>
The pts and the corresponding duration is written in sidx
atoms, thus make sure these match up correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since this structurally is quite different from normal RTP
(multiple streams are muxed into one single mpegts stream,
which is packetized into one single RTP session), it is kept
as a separate muxer.
Since this structurally also behaves differently than normal
RTP, all of the other muxers that do chained RTP muxing
(rtsp, sap, mp4) would need to be updated similarly to handle
this - in particular, creating one single rtp_mpegts muxer
for the whole presentation instead of one rtp muxer per stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
The packetizer only supports splitting at GOB headers - if
such aren't available frequently enough, it splits at any
random byte offset (not at a macroblock boundary either, which
would be allowed by the spec) and sends a payload header pretend
that it starts with a GOB header.
As long as a receiver doesn't try to handle such cases cleverly
but just drops broken frames, this shouldn't matter too much
in practice.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead explicitly jump to the default case in the cases where
it is wanted, and avoid fallthrough between different codecs,
which could easily introduce bugs if people editing the code
aren't careful.
Signed-off-by: Martin Storsjö <martin@martin.st>
If we throw away the buffered incomplete frame, make sure to also
throw away the buffered bits of an incomplete byte at the same
time.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In particular, when packetizing mpegts into rtp, the input packet
timestamp may come from more than one stream, which could cause
multiple packets be written with the same timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is the same adjustment that the mp4 muxer does to the start
timestamp of fragments, since the timestamp of a sample in an mp4
file is implicit from the sum of earlier sample durations.
This avoids gaps in the timeline (which can stop dash.js from
playing it back), and makes sure the timestamp on the segmenter
level matches what the mp4 muxer actually writes into the segments.
This is only an issue if the AVPacket duration of the last
packet of a segment doesn't point to the actual start timestamp
of the next packet (the first in the next segment).
Signed-off-by: Martin Storsjö <martin@martin.st>
Write a new start time if the duration of the previous segment
didn't match the start of the next one. Check that segments
actually are continuous before writing a repeat count.
This makes sure timestamps deduced from the timeline actually
match the real start timestamp as written in filenames (if
using a template containing $Time$).
Signed-off-by: Martin Storsjö <martin@martin.st>
Since 3cec81f4d4, a zero-length metadata value would try to
allocate 2*0 bytes, where av_malloc() returns NULL.
Always add one to the allocated length, to allow space for
a null terminator in the zero-length case.
Incidentally, this fixes fate-alac on RVCT 4.0, where a compiler
bug seems to mess up the mov muxer to the point that it writes
the wrong sort of metadata. Previously this bug was undetected,
but since 3cec81f4d4 such mov files started returning
AVERROR(ENOMEM) in the mov demuxer.
Signed-off-by: Martin Storsjö <martin@martin.st>
In matroska_read_seek(), |tracks| is assigned at the begining of the
function. However, functions like matroska_parse_cues() could reallocate
the tracks and invalidate |tracks|.
This assigns |tracks| only before using it, so that it will not get
invalidated elsewhere.
Bug-Id: chromium/427266
For the last_duration field, it's mostly theoretical, but the
total_duration field more probably may need to actually be 64 bit.
Bug-Id: CID 1254944
Signed-off-by: Martin Storsjö <martin@martin.st>
As the manifest/segments are flushed to disk, log to stderr the
progress, when in verbose logging mode
Signed-off-by: Martin Storsjö <martin@martin.st>
Only the upper 2 bits of the first byte are known to be
a fixed value.
The lower bits in the first byte of a RTP packet could be set
if the input is from another RTP packetizers than libavformat's,
but for RTCP packets, they would also be set when sending RTCP RR
packets, triggering false warnings about incorrect input format
to the protocol.
Signed-off-by: Martin Storsjö <martin@martin.st>
The RTP muxer enables the actual codepaths within sdp.c,
which depend on hevc.o since e5cfc8fd.
This fixes builds with --disable-everything --enable-muxer=rtp.
Signed-off-by: Martin Storsjö <martin@martin.st>
The Extensible Metadata Platform tag can contain various kind of data
which are not strictly related to the video file, such as history of edits
and saves from the project file. So display XMP metadata only when the
user explicitly requires it.
Based on a patch by Marek Fort <marek.fort@chyronhego.com>.
These tags describe the product and quicktime library version respectively.
They originate from Adobe Premiere, but also some other programs use them.
Contrary to other tags, they contain 'raw' data which is not to be
interpreted as iso639 or mac strings.
Based on a patch by Peter Ross <pross@xvid.org>.
This uses the RIFF header stored size to figure out the expected AVI
file size, instead of the actual file. To work fully it requires handling
failed avio_seek() instead of assuming they always succeed.
Some fate file has been cut off and contains half a frame at the end which
previously was not output during demuxing. This frame is now output to
encoder, thus the fate diff update.
Bug-Id: 261
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Tell the user that the RTP muxer needs to be used to packetize
the data - using the RTP protocol on its own isn't enough.
Signed-off-by: Martin Storsjö <martin@martin.st>
Having more than 10 consecutive frames decoded as mp3 should be
considered a clear signal that the sample is mp3 and not mpegps.
Reported-By: Florian Iragne <florian@iragne.fr>
CC: libav-stable@libav.org
Fixes decting channel layout for files with uncommon audio, such as
FL and FR in two separate streams. Introduced in 3bab7cd.
CC: libav-devel@libav.org
Sample-Id: ticket1474.mov
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This allows to load metadata entries longer than 1024 bytes.
Displaying them is still limited to 1024 characters, but applications
can load them fully now.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This fixes the build on compilers that interpreted the earlier
code as a variable length array (which we intentionally disallow).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows one to specify templated segment names for init-segments,
media-segments, and for the base-url in the case of single-file.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, when streaming to an RTMP server, any time a packet of type
RTMP_PT_NOTIFY is encountered, the packet is prepended with @setDataFrame
before it gets sent to the server. This is incorrect; only packets for
onMetaData and |RtmpSampleAccess should invoke @setDataFrame on the RTMP
server. Specifically, the current bug manifests itself when trying to
stream onTextData or onCuePoint invocations.
This fix addresses that problem and ensures that the @setDataFrame is
only prepended for onMetaData and |RtmpSampleAccess.
Since data is fed to the rtmp_write function in smaller pieces (depending
on the calling IO buffer size), we can't generally assume that the
whole packet (or even the whole command string) is available at once,
therefore we can only check the command string once the full packet
has been transferred to us for sending.
Based on a patch by Jeffrey Wescott.
Signed-off-by: Martin Storsjö <martin@martin.st>
We try to avoid mixing av_malloc with av_realloc, since av_malloc
may be implemented with functions that can't (formally) be mixed
with the functions used in av_realloc.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit b9d08c77a4.
After taking MoveFileEx into use, we can replace files with renames
on windows as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows getting the normal unix semantics, where a rename
allows replacing an existing file.
Based on a suggestion by Reimar Döffinger.
Signed-off-by: Martin Storsjö <martin@martin.st>
This doesn't add any dependency on library internals, since this
only is a static inline function that gets built into each of the
calling functions - this is only to reduce the code duplication.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows setting the right fragment number if doing
random-access writing of fragments, and also allows reading the
current sequence number.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows creating a later mp4 fragment without sequentially
writing the earlier ones before (when called from a segmenter).
Normally when writing a fragmented mp4 file sequentially, the
first timestamps of a fragment are adjusted to match the
end of the previous fragment, to make sure the timestamp is the
same, even if it is calculated as the sum of previous fragment
durations. (And for the first packet in a file, the offset of
the first packet is written using an edit list.)
When writing an individual mp4 fragment discontinuously like this
(with potentially writing the earlier fragments separately later),
there's a risk of getting a gap in the timeline if the duration
field of the last packet in the previous fragment doesn't match up
with the start time of the next fragment.
Using this requires setting -avoid_negative_ts make_non_negative
(or -avoid_negative_ts 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that the internal utf8 path names are handled
properly - the normal file handling functions assume path names
are in the native codepage, which isn't utf8.
This assumes that the tools outside of lavf don't use the mkdir
definition. (The tools don't do the same reading of command line
parameters as wchar either - they probably won't handle all possible
unicode file parameters properly, but at least work more predictably
if no utf8/wchar conversion is involved.)
This is moved further down in os_support.h, since windows.h shouldn't
be included before winsock2.h, while io.h needs to be included before
the manual defines for lseek functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
On windows, rename(2) will fail if the target file exists. On
unix this trick is used to make sure that people reading the file
either will get the full previous file, or the full new version
of the file, but no intermediate version.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that segments actually start at a keyframe (and
makes sure we don't split segments twice in a row, with one segment
consisting of only a handful of packets), when one stream uses b-frames
while another one doesn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
Don't write any bitrate attribute if it isn't known. As long as one
doesn't want automatic bitrate switching, playback can work just
fine even if it isn't set.
If strict standard compliance is requested, this is still considered
an error, since the attribute is mandatory according to the spec.
Based on a patch by Rodger Combs.
Signed-off-by: Martin Storsjö <martin@martin.st>
The chained flv muxer wants one set of tags - normally this set
could be signaled via the AVOutputFormat codec_tag field (as
smoothstreamingenc and dashenc do). hdsenc doesn't signal it, since
the FLV codec tag arrays aren't exported from flvenc.c. This can
lead to the caller keeping an original codec tag from the originating
container here, which would then be a mismatch for the FLV muxer.
Since we don't really care about what codec tag the caller might
have set, just clear it and let the lavf muxer layer set the right
one for the chained FLV muxer later instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
When given a stream starting at dts=0, it would previously consider
s->offset as uninitialized and set an offset when the second packet
was written, ending up writing two packets with dts=0. By initializing
this field to AV_NOPTS_VALUE, we make sure that we only initialize it
once, on the first packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously only tfra entries were added for the first track in each moof.
The frag_info array used for tfra can also be used for writing
other kinds of fragment indexes, where it's more important to
include all tracks.
When the separate_moof option is enabled (as in ismv), we write
a separate moof for each track, so this doesn't make any difference
in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly to serve as a reference example on how to segment
the output from the mp4 muxer, capable of writing the segment
list in four different ways:
- SegmentTemplate with SegmentTimeline
- SegmentTemplate with implicit segments
- SegmentList with individual files
- SegmentList with one single file per track, and byte ranges
The muxer is able to serve live content (with optional windowing)
or create a static segmented MPD.
In advanced cases, users will probably want to do the segmenting
in their own application code.
Signed-off-by: Martin Storsjö <martin@martin.st>
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented streams with an empty initial moov,
we won't have any samples in any tracks when writing the
moov atom, thus trust that any tracks that are added actually
will be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is needed because Icecast since version 2.4.1 doesn't default
to audio/mpeg anymore. AVOption default not used here, since a later
check if -content_type is set is performed and would break.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This allows for proper error reporting. Only do
this for non-legacy requests as only Icecast >2.4.0
will reply with a proper status.
Libav seems to accept both, 100 and 200 status codes, but
let's stay close to spec.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This avoids a potential crash if writing a fragmented psp mp4
(which probably is only a hypothetical scenario).
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously we wrote decoding timestamps here, while the specs
say it should be presentation timestamps.
Signed-off-by: Martin Storsjö <martin@martin.st>
When using the new first_trun flag instead of checking the track id,
we don't need to have a special case for the separate_moof flag
any longer.
This simplifies the complicated codepath ever so slightly.
Signed-off-by: Martin Storsjö <martin@martin.st>
In this case, shift tracks to start from zero instead (potentially
stretching the first sample in tracks that start later than the
first one).
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. This results in AV sync errors when
edit lists are used to adjust AV sync.
Some players, such as QuickTime, don't respect the duration for
audio packets, so if an audio track starts later than the video
track and the first audio sample gets a duration longer than the
actual amount of data in it, the result will be out of sync.
Based on patches by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is the same logic as is invoked on AVFMT_TS_NEGATIVE,
but which can be enabled manually, or can be enabled
in muxers which only need it in certain conditions.
Also allow using the same mechanism to force streams to start
at 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
The only parameters needed by the demuxers are the sample rate and sample
count, which can be trivially extracted manually, without resorting to
an avpriv function.
It will not be set unless the codec context is used as the encoding
context, which is discouraged. For MP2, av_get_audio_frame_duration()
will already set the frame size properly. For MP3, set the frame size
explicitly.
It is never an error if this method failed. If rt->live was
explicitly set to 0 (known to be a recorded file), print it
as a warning, otherwise print it as a debug message.
Based on a patch by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
The tfdt atom shouldn't be needed in those cases, we already
write tfxd atoms for ismv anyway, which is roughly equivalent.
This avoids having to declare the iso6 brand for ismv files.
Signed-off-by: Martin Storsjö <martin@martin.st>
ISO/IEC 14496-12:2012/Cor 1:2013 is explicit about how this should be
handled. All zeros doesn't mean that the full file has got a zero
duration, only that the track samples described within the initial moov
have got zero duration. An all ones duration means an indeterminate
duration.
Keep writing a duration consisting of all ones for the ISM mode -
older windows media player versions won't play a file if this is
zero. (Newer windows media player versions play either version fine.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
The custom IO flag actually never is set for muxers, only for
demuxers, so the check was pointless (unless a user intentionally
would set the flag to signal using custom IO).
Signed-off-by: Martin Storsjö <martin@martin.st>
If one track doesn't have any samples within a moof, no traf/trun
is written for it. When the omit_tfhd_offset flag is set, none
of the tfhd atoms have any base_data_offset set, and the implicit
offset (end of previous track fragment data, or start of the moof
for the first trun) is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
should be the raw amount of pixels (for example 3840x1080 for full HD side by
side) and the DisplayWidth/Height in pixels should be the amount of pixels for
one plane (1920x1080 for that full HD stream)."
So, move the aspect ratio check in the mkv_write_stereo_mode() function
and always write the embl when stereo format and/or aspect ration is set.
Also add a few comments to that function.
CC: libav-stable@libav.org
Found-by: Asan Usipov <asan.usipov@gmail.com>
While a standalone implementation is nice, we already depend on
gmtime and gmtime_r in a number of places.
Signed-off-by: Martin Storsjö <martin@martin.st>
gmtime isn't thread safe in general. In msvcrt (which lacks gmtime_r),
the buffer used by gmtime is thread specific though.
One call to localtime is left in avconv_opt.c, where thread safety
shouldn't matter (instead of making avconv depend on the libavutil
internal header).
Signed-off-by: Martin Storsjö <martin@martin.st>
If the buffer provided to strftime is too small, the buffer contents
are indeterminate - it does not guarantee actually null terminating
the buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
None of these are likely unless the user is writing a file with two billion
streams or a duration of around two months.
CC: libav-stable@libav.org
Bug-Id: CID 700568 / CID 700569 / CID 700570 /
CID 700571 / CID 700572 / CID 700573
The new function wraps errno so that its value is correctly reported
when other functions overwrite it (eg. in case of logging).
CC: libav-stable@libav.org
Bug-Id: CID 1135748
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
