We can handle v4 just fine, the parts we currently use
are the same for v3 and v4.
v4 can in addition contain an index which we so far do
not use though.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Fixes trac issue #438.
Seeking in that sample would cause ogg_read_timestamp to fail
because ogg_packet would go into a state where all packets
of stream 1 would be discarded until the end of the stream.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Right now those muxers use the default timebase in all cases(1/90000).
This patch avoid unnecessary rescaling and makes the printed timestamps
more readable.
Also, extend the printed information to include the timebases and packet
pts/duration and align the columns.
Obviously changes the results of all fate tests which use those two
muxers.
* qatar/master:
libx264: fix indentation.
vorbis: fix overflows in floor1[] vector and inverse db table index.
win64: add a XMM clobber test configure option.
movdec: Parse the dvc1 atom
ARM: ac3: fix ac3_bit_alloc_calc_bap_armv6
swscale: K&R formatting cosmetics for Blackfin code
frwu: lowercase the FRWU codec name
movdec: fix dts generation in fragmented files
fate: make acodec-ac3_fixed test output raw AC3
APIchanges: add missing commit hashes
swscale: implement MMX, SSE2 and AVX functions for RGB32 input.
ra144enc: drop pointless "encoder" from .long_name
bethsoftvideo: fix palette reading.
mpc7: use av_fast_padded_malloc()
mpc7: simplify handling of packet sizes that are not a multiple of 4 bytes
doc: decoding Forward Uncompressed is supported
Fix a typo in the x86 asm version of ff_vector_clip_int32()
pcmenc: Do not set avpkt->size.
ff_alloc_packet: modify the size of the packet to match the requested size
Conflicts:
doc/APIchanges
libavcodec/libx264.c
libavcodec/mpc7.c
libavformat/isom.h
libswscale/Makefile
libswscale/bfin/yuv2rgb_bfin.c
tests/ref/fate/bethsoft-vid
tests/ref/seek/ac3_ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Normally, the actual payload data contains sequence headers, too,
and the parser can extract this and set it as extradata. However,
the data in the dvc1 atom is the "official" extradata for the file.
This is required for proper stream copy of vc1 from ismv to ismv.
Signed-off-by: Martin Storsjö <martin@martin.st>
Do not use AVStream's duration for dts generation since it contains in
some cases the duration of the whole file instead of duration of the
samples in the moov. This happens if the mdhd holds the duration of the
whole file but has no entries or a zero duration in its stts.
* qatar/master: (22 commits)
frwu: Employ more meaningful return values.
fraps: Use av_fast_padded_malloc() instead of av_realloc()
mjpegdec: use av_fast_padded_malloc()
eatqi: use av_fast_padded_malloc()
asv1: use av_fast_padded_malloc()
avcodec: Add av_fast_padded_malloc().
swscale: enable dithering in MMX functions.
swscale: make rgb24 function macros slightly smaller.
avcodec.h: Remove some disabled cruft.
swscale: remove obsolete comment.
swscale-test: Drop unused argc and argv arguments from main().
zmbv: Employ more meaningful return values.
zmbvenc: Employ more meaningful return values.
vc1: prevent null pointer dereference on broken files
zmbv: check av_realloc() return values and avoid memleaks on ENOMEM
truespeech: align buffer
ac3: Do not read past the end of ff_ac3_band_start_tab.
dv: Fix small stack overread related to CVE-2011-3929 and CVE-2011-3936.
dv: Fix null pointer dereference due to ach=0
dv: check stype
...
Conflicts:
doc/APIchanges
libavcodec/asv1.c
libavcodec/avcodec.h
libavcodec/eatqi.c
libavcodec/fraps.c
libavcodec/frwu.c
libavcodec/zmbv.c
libavformat/dv.c
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
dv: Fix null pointer dereference due to ach=0
Fixes part2 of CVE-2011-3929
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
dv: check stype
Fixes part1 of CVE-2011-3929
Possibly fixes part of CVE-2011-3936
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
* qatar/master: (29 commits)
fate: add golomb-test
golomb-test: K&R formatting cosmetics
h264: Split h264-test off into a separate file - golomb-test.c.
h264-test: cleanup: drop timer invocations, commented out code and other cruft
h264-test: Remove unused DSP and AVCodec contexts and related init calls.
adpcm: Add missing stdint.h #include to fix standalone header compilation.
lavf: add functions for accessing the fourcc<->CodecID mapping tables.
lavc: set AVCodecContext.codec in avcodec_get_context_defaults3().
lavc: make avcodec_close() work properly on unopened codecs.
lavc: add avcodec_is_open().
lavf: rename AVInputFormat.value to raw_codec_id.
lavf: remove the pointless value field from flv and iv8
lavc/lavf: remove unnecessary symbols from the symbol version script.
lavc: reorder AVCodec fields.
lavf: reorder AVInput/OutputFormat fields.
mp3dec: Fix a heap-buffer-overflow
adpcmenc: remove some unneeded casts
adpcmenc: use int16_t and uint8_t instead of short and unsigned char.
adpcmenc: fix adpcm_ms extradata allocation
adpcmenc: return proper AVERROR codes instead of -1
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/adpcmenc.c
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/libavcodec.v
libavcodec/mpc7.c
libavcodec/mpegaudiodec.c
libavcodec/options.c
libavformat/Makefile
libavformat/avformat.h
libavformat/flvdec.c
libavformat/libavformat.v
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way, if the AVCodecContext is allocated for a specific codec, the
caller doesn't need to store this codec separately and then pass it
again to avcodec_open2().
It also allows to set codec private options using av_opt_set_* before
opening the codec.
It allows to check whether an AVCodecContext is open in a documented
way. Right now the undocumented way this check is done in lavf/lavc is
by checking whether AVCodecContext.codec is NULL. However it's desirable
to be able to set AVCodecContext.codec before avcodec_open2().
* qatar/master: (26 commits)
avconv: deprecate the -deinterlace option
doc: Fix the name of the new function
aacenc: make sure to encode enough frames to cover all input samples.
aacenc: only use the number of input samples provided by the user.
wmadec: Verify bitstream size makes sense before calling init_get_bits.
kmvc: Log into a context at a log level constant.
mpeg12: Pad framerate tab to 16 entries.
kgv1dec: Increase offsets array size so it is large enough.
kmvc: Check palsize.
nsvdec: Propagate errors
nsvdec: Be more careful with av_malloc().
nsvdec: Fix use of uninitialized streams.
movenc: cosmetics: Get rid of camelCase identifiers
swscale: more generic check for planar destination formats with alpha
doc: Document mov/mp4 fragmentation options
build: Use order-only prerequisites for creating FATE reference file dirs.
x86 dsputil: provide SSE2/SSSE3 versions of bswap_buf
rtsp: Remove some unused variables from ff_rtsp_connect().
avutil: make intfloat api public
avformat_write_header(): detail error message
...
Conflicts:
doc/APIchanges
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/kmvc.c
libavcodec/x86/Makefile
libavcodec/x86/dsputil_yasm.asm
libavcodec/x86/pngdsp-init.c
libavformat/movenc.c
libavformat/movenc.h
libavformat/mpegtsenc.c
libavformat/nsvdec.c
libavformat/utils.c
libavutil/avutil.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The MP3 demuxer split the data in packets of 1024B which are later split
in MP3 frames by the MPEG audio parser. The last read is "truncated",
but this should not raise any error.
Solution-by: Michael Niedermayer
This makes the first packet of a track fragment run to get
the keyframe flag set properly if sample_degradation_priority
is nonzero.
This makes the keyframes flag be set properly for ismv files
created by Microsoft.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, we've only passed the key string on to the recursive
amf_parse_object for the mixedarray type, not for 'object'. By
passing the key string on, the recursive amf_parse_object can
store the amf objects as metadata.
This kind of data was seen in data from XSplit Broadcaster, received
over RTMP via Wowza. This patch allows reading this metadata.
Signed-off-by: Martin Storsjö <martin@martin.st>
Check results for av_malloc() and fix an overflow in one call.
Related to CVE-2011-3940.
Based in part on work from Michael Niedermayer.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Fixes CVE-2011-3940 (Out of bounds read resulting in out of bounds write)
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 5c011706bc)
Signed-off-by: Alex Converse <alex.converse@gmail.com>
-vbsf doesn't exist anymore. It got renamed to -bsf somewhere along the
line. Update print statement accordingly.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Current demuxer recognizes several colorspace formats that begin with 'C420'
but does not yet recognize plain 'C420'. GStreamer's y4menc component
generates .y4m files with a 'C420' colorspace. This new comparison is
placed after the other 'C420' checks so that it doesn't interfere with
them.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
aacenc: Fix LONG_START windowing.
aacenc: Fix a bug where deinterleaved samples were stored in the wrong place.
avplay: use the correct array size for stride.
lavc: extend doxy for avcodec_alloc_context3().
APIchanges: mention avcodec_alloc_context()/2/3
avcodec_align_dimensions2: set only 4 linesizes, not AV_NUM_DATA_POINTERS.
aacsbr: ARM NEON optimised sbrdsp functions
aacsbr: align some arrays
aacsbr: move some simdable loops to function pointers
cosmetics: Remove extra newlines at EOF
Conflicts:
libavcodec/utils.c
libavfilter/formats.c
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
We may or may not be able to play the latter parts
but not demuxing at all seems like the worst possible behaviour.
Fixes playback of e.g.
http://playlist.yahoo.com/makeplaylist.dll?sid=128114687&sdm=web&pt=rd
As a proper solution either multiple video streams should
be exported or side data should be used to update extradata
if necessary.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Since it is set for e.g. webm muxer we should make it possible
to test such streams with framecrc, too.
Though the primary reason is that this allows the H.264 tests
to not run into this check when fixing raw video encode to
pass pts values on.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This fixes the video frame pts (off by one for each MVIh)
and makes the "key frames" decode stand-alone (MVIh
contains only palette, such a palette-only frame being
marked as key frame is not really correct).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
In this mode, no seeks will be done except for within moov/moof
fragments, which should fit within the AVIOContext buffer.
This allows pushing live smooth streaming format data to
a live publishing point on IIS over http.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
smacker: Sanity check huffman tables found in the headers.
smacker: remove dead store
qdm2: Check data block size for bytes to bits overflow.
mxfdec: Fix files with essence containers larger than 2 GiB.
mxfdec: Employ correct printf conversion specifiers for POSIX int types.
vc1: always read the bfraction element for interlaced fields
fate: add XWD image regression test
lavf: prevent infinite loops while flushing in avformat_find_stream_info
matroskadec: Pad AAC extradata.
ismindex: Fix build on mingw
Conflicts:
libavformat/mxfdec.c
libavformat/utils.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
wma: Clip WMA1 and WMA2 frame length to 11 bits.
movenc: Don't require frame_size to be set for modes other than mov
doc: Update APIchanges with info on muxer flushing
movenc: Reindent a block
tools: Remove some unnecessary #undefs.
rv20: prevent calling ff_h263_decode_mba() with unset height/width
tools: K&R reformatting cosmetics
Ignore generated aviocat and ismindex tools.
build: Automatically include architecture-specific library Makefile snippets.
indeo5: prevent null pointer dereference on broken files
pktdumper: Use usleep instead of sleep
cosmetics: Remove some unnecessary block braces.
Drop unnecessary prefix from *sink* variable and struct names.
Add a tool for creating smooth streaming manifests
movdec: Calculate an average bit rate for fragmented streams, too
movenc: Write the sample rate instead of time scale in the stsd atom
movenc: Add a separate ismv/isma (smooth streaming) muxer
movenc: Allow the caller to decide on fragmentation
libavformat: Add a flag for muxers that support write_packet(NULL) for flushing
movenc: Add support for writing fragmented mov files
...
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
ffmpeg.c
ffplay.c
libavfilter/Makefile
libavformat/Makefile
libavformat/avformat.h
libavformat/movenc.c
libavformat/movenc.h
libavformat/version.h
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If no data was seen for a stream decoder are returning 0 when fed with
empty packets for flushing. We can stop flushing when the decoder does
not return delayed delayed frames anymore. Changes try_decode_frame()
return value to got_picture or negative error.
CC: libav-stable@libav.org
The field frame_size isn't written to the output anywhere except
than in mov.
This facilitates stream copy from formats that don't set frame_size.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add some space around operators and wrap a comment
that extends past the 80 char "limit"/guideline.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes part2 of CVE-2011-3929
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes part1 of CVE-2011-3929
Possibly fixes part of CVE-2011-3936
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It can also optionally split the file into individual fragments,
which allows it to be served from any web server without any
server side support.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes calculation of trackDuration if the MOVIentry array
is cleared. This is required by the fragmentation support in the
next patch.
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit makes the check specific to the case that needs it.
Regression was introduced by
commit 62adc60b97
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Fri Dec 16 06:13:04 2011 +0100
avidec: Check that the header chunks fit in the available filesize.
Fixes Ticket771
Bug found by: Diana Elena Muscalu
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes CVE-2011-3940 (Out of bounds read resulting in out of bounds write)
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
aacenc: Fix identification padding when the bitstream is already aligned.
aacenc: Write correct length for long identification strings.
aud: remove unneeded field, audio_stream_index from context
aud: fix time stamp calculation for ADPCM IMA WS
aud: simplify header parsing
aud: set pts_wrap_bits to 64.
cosmetics: indentation
aud: support Westwood SND1 audio in AUD files.
adpcm_ima_ws: fix stereo decoding
avcodec: add a new codec_id for CRYO APC IMA ADPCM.
vqa: remove unused context fields, audio_samplerate and audio_bits
vqa: clean up audio header parsing
vqa: set time base to frame rate as coded in the header.
vqa: set packet duration.
vqa: use 1/sample_rate as the audio stream time base
vqa: set stream start_time to 0.
lavc: postpone the removal of AVCodecContext.request_channels.
lavf: postpone removing av_close_input_file().
lavc: postpone removing old audio encoding and decoding API
avplay: remove the -er option.
...
Conflicts:
Changelog
libavcodec/version.h
libavdevice/v4l.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Remove ffmpeg.
aacenc: Simplify windowing
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
aacenc: Deinterleave input samples before processing.
aacenc: Store channel count in AACEncContext.
aacenc: Move Q^3/4 calculation to it's own table
aacenc: Request normalized float samples instead of converting s16 samples to float.
aacpsy: Replace an if with FFMAX in LAME windowing.
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
aacenc: cosmetics: move init() and end() to the bottom of the file.
aacenc: aac_encode_init() cleanup
XWD encoder and decoder
vc1: don't read the interpfrm and bfraction elements for interlaced frames
mxfdec: fix memleak on mxf_read_close()
westwood: split the AUD and VQA demuxers into separate files.
Conflicts:
.gitignore
Changelog
Makefile
configure
doc/ffmpeg.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/aacenc.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/img2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reduces the delay when opening the video with quicktime.
Idea-by: Maksym Veremeyenko <verem@m1stereo.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Some applications use the j2c extension for jpeg2000 codestream files.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This check isn't relevant in the way the code currently works.
Also change a case of if (x == 0) into if (!x).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Conflicts:
Changelog
RELEASE
libavcodec/mpegaudiodec.c
libavcodec/pthread.c
libavformat/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a322, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
Add a tool that uses avio to read and write, doing a plain copy of data
ARM: fix build with FFT enabled and MDCT disabled
lavf: force single-threaded decoding in avformat_find_stream_info
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
avserver: fix build after the next bump.
Conflicts:
libavformat/Makefile
libavformat/avidec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
Signed-off-by: Martin Storsjö <martin@martin.st>
The H.264 decoder needs SPS and PPS for initialization during
multi-threaded decoding. When probed single-threaded SPS and PPS are
copied to extradata and are available for proper initialization of
the decoder before the first frame is decoded.
* qatar/master:
rv34: add NEON rv34_idct_add
rv34: 1-pass inter MB reconstruction
add SMJPEG muxer
avformat: split out common SMJPEG code
pictordec: Use bytestream2 functions
avconv: use avcodec_encode_audio2()
pcmenc: use AVCodec.encode2()
avcodec: bump minor version and add APIChanges for the new audio encoding API
avcodec: Add avcodec_encode_audio2() as replacement for avcodec_encode_audio()
avcodec: add a public function, avcodec_fill_audio_frame().
rv34: Intra 16x16 handling
rv34: Inter/intra MB code split
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/pictordec.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/rv34dsp.asm
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Enhances seeking by demuxing until the requested timestamp is reached within
the segment selected by the seek code using the playlist info.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
mov: cosmetics - move a line to a better position and add a comment
Oana Andreea Stratulat submitted a similar patch to trac, but forgot
to notify the ML about it.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current code would just return uninitialized data with no way
to detect this condition.
Instead, fill the whole GUID with 0 in that case.
Fixes valgrind uninitialized data errors in fate-seek-lavf_asf.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
