Anton Khirnov
8d74bf17c6
lavf: hide private symbols.
...
Overhead as reported by rbelf-size goes from 40147 to 20877.
2011-10-20 21:06:45 +02:00
Anton Khirnov
ab88b25f99
lavf: use avpriv_ prefix for some dv functions.
...
They are used in libavdevice.
2011-10-20 20:57:23 +02:00
Anton Khirnov
1fa395e471
lavf: use avpriv_ prefix for ff_new_chapter().
...
It's used in libavdevice.
2011-10-20 20:57:23 +02:00
Justin Ruggles
68d3aec819
avcodec: add CODEC_CAP_DELAY note to avcodec_decode_audio3() documentation
2011-10-20 13:30:08 -04:00
Justin Ruggles
352fc5f128
avcodec: clarify the CODEC_CAP_DELAY note in avcodec_decode_video2()
2011-10-20 13:30:08 -04:00
Justin Ruggles
ffeeae923b
avcodec: clarify documentation of CODEC_CAP_DELAY
2011-10-20 13:30:08 -04:00
Justin Ruggles
1baa25c7da
shorten: fix end-of-stream decoding.
...
enable CODEC_CAP_DELAY to flush any remaining frames in the buffer.
Stop decoding when the FN_QUIT command is found so that a trailing seek table
isn't decoded as a normal frame.
decode all channels in the same call to avcodec_decode_audio3() so that
decoding will not stop after the first channel of the last frame.
Updated FATE reference. More valid audio is now decoded.
2011-10-20 13:09:46 -04:00
Justin Ruggles
d03f9f65c0
shorten: do not use block size to determine whether to read the header.
2011-10-20 13:09:46 -04:00
Justin Ruggles
882dafe9b6
shorten: check output buffer size before decoding
2011-10-20 13:09:26 -04:00
Justin Ruggles
bd7f7d6c78
shorten: use av_clip_int16() for output sample clipping
2011-10-20 13:09:26 -04:00
Justin Ruggles
069ada46c1
shorten: use bytestream functions to decode the embedded WAVE header
2011-10-20 13:09:25 -04:00
Justin Ruggles
c25762fcf1
shorten: add some comments
2011-10-20 13:09:25 -04:00
Justin Ruggles
15d146c958
shorten: merge decoding of FN_DIFF* subblocks into decode_subframe_lpc()
2011-10-20 13:09:25 -04:00
Justin Ruggles
034f42dfce
cosmetics: remove some needless commented-out stuff
2011-10-20 13:09:25 -04:00
Justin Ruggles
cfa317f67d
shorten: validate block size
2011-10-20 13:09:25 -04:00
Justin Ruggles
45d7d31fb9
shorten: move declaration of 'ret' to top of shorten_decode_frame()
2011-10-20 13:09:25 -04:00
Justin Ruggles
a8055992c0
shorten: pass on error value from allocate_buffers() instead of returning -1
2011-10-20 13:09:25 -04:00
Justin Ruggles
9e5e2c2d01
shorten: check for realloc failure
2011-10-20 13:09:25 -04:00
Justin Ruggles
fe31a637f1
shorten: move decoding of prediction order and applying of global offset to
...
decode_subframe_lpc().
2011-10-20 13:09:25 -04:00
Justin Ruggles
0f97c5014b
shorten: only calculate output size when returning decoded samples, otherwise
...
just set data_size to zero.
2011-10-20 13:09:25 -04:00
Justin Ruggles
e9e37f2d10
cosmetics: reindent
2011-10-20 13:09:25 -04:00
Justin Ruggles
9000b6db22
shorten: separate processing of audio commands from non-audio commands
2011-10-20 13:09:25 -04:00
Justin Ruggles
07745485ef
shorten: skip some fields in the WAV header embedded in the shorten header.
...
fixes incorrect bitrate reporting and potential misreporting of the number of
channels.
2011-10-20 13:09:25 -04:00
Justin Ruggles
a1f7885a8b
shorten: split reading of file header into a separate functions
2011-10-20 13:09:25 -04:00
Justin Ruggles
9ef6c7977f
avformat: do not require frame_size for Speex.
...
Having it there forces decoding of a frame in order to get frame_size, but it
is not really needed for proper demuxing or decoding.
2011-10-20 13:06:16 -04:00
Justin Ruggles
0e69c04773
ogg/speex: set correct timestamp and duration for the first packet.
...
The first timestamp should be negative due to delay.
Also, do not set AVCodecContext.frame_size unnecessarily.
2011-10-20 13:06:16 -04:00
Justin Ruggles
4ee247a2bd
flvenc: check packet duration in speex using timestamps
...
Using AVCodecContext.frame_size is not reliable.
2011-10-20 13:06:16 -04:00
Justin Ruggles
b606a01759
libspeexenc: add libspeex encoder
2011-10-20 13:06:15 -04:00
Justin Ruggles
52375ba567
flvenc: adjust for negative DTS for all codecs, not just H.264
2011-10-20 13:06:15 -04:00
Michael Niedermayer
e6e86e64c3
presets: favor vprofile over profile to avoid conflicts with audio profiles
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-20 16:36:52 +02:00
Diego Biurrun
265980dabc
x86: Move some variable declarations below the appropriat #ifdef.
...
This avoids some unused variable warnings with YASM disabled.
2011-10-20 16:19:27 +02:00
Diego Biurrun
2cb7c81669
x86: Fix linking of ProRes DSP ASM with YASM disabled.
2011-10-20 16:19:13 +02:00
Stefano Sabatini
43fce2214b
lavfi: add missing header mulitple-inclusion guard in transform.h
2011-10-20 15:59:20 +02:00
Stefano Sabatini
99d48b07d1
lavfi/transform.h: apply misc doxy cosmetical changes
2011-10-20 15:59:12 +02:00
Michael Niedermayer
8daf04add4
aacdec: support chan config =1 stereo files
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-20 13:54:54 +02:00
Michael Niedermayer
d0492578c8
Merge remote-tracking branch 'qatar/master'
...
* qatar/master:
presets: rename presets directory
lavc: make avcodec_get_context_defaults3 "officially" public
lavf: replace av_new_stream->avformat_new_stream part II.
lavf,lavd: replace av_new_stream->avformat_new_stream part I.
lavf: add avformat_new_stream as a replacement for av_new_stream.
Use correct scaling table for bwd-pred MVs in second B-field
Ut Video decoder
Makefile: change presets extension to .avpreset
lavfi: add rgbtestsrc source, ported from MPlayer libmpcodecs
lavfi: add testsrc source
AVOptions: add documentation.
presets: update libx264 ffpresets
Conflicts:
Changelog
doc/APIchanges
doc/ffmpeg.texi
ffpresets/libx264-ipod320.ffpreset
ffpresets/libx264-ipod640.ffpreset
ffserver.c
libavcodec/avcodec.h
libavcodec/options.c
libavcodec/version.h
libavdevice/libdc1394.c
libavfilter/avfilter.h
libavfilter/vsrc_testsrc.c
libavformat/flvdec.c
libavformat/riff.c
libavformat/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-20 02:34:51 +02:00
Luca Barbato
796cd225da
pulse: cosmetics
2011-10-19 16:16:21 -07:00
Luca Barbato
f5b0938169
pulse: introduce pulseaudio input
...
It currently use the simple api and is using the latency information
provided only to offset the stream start.
2011-10-19 15:43:30 -07:00
Paul Flinders
9ef714328c
deshake: limit deshake to specific area to search for motion vectors.
2011-10-20 00:39:34 +02:00
Michael Niedermayer
1373923ddf
v210dec: remove debuging #include
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-20 00:35:45 +02:00
Diego Biurrun
463ea05ab2
avcodec.h: Move G.729/G.723 CODEC_IDs to the correct section.
...
This is done conditional to the libavcodec version to avoid ABI breaks.
2011-10-20 00:19:19 +02:00
Diego Biurrun
26af0953c0
Only test-compile w32pthreads.h if W32THREADS are available.
...
This fixes 'make checkheaders' on non-W32THREADS systems.
2011-10-20 00:18:29 +02:00
Laurent Aimar
bc38e83793
mpegts: do not return from ff_mpegts_parse_packet() after having seen the first PMT
...
It prevents leaving the AVPacket uninitialized.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-19 23:28:05 +02:00
Laurent Aimar
49ec0c818d
mpegts: fix return value when enough ts packets have been parsed or when the first PMT has been seen.
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-19 23:28:05 +02:00
Matthew Einhorn
e662b263d9
Fixes avpicture_layout to not write past buffer end.
...
avpicture_get_size() returns the size of buffer required for avpicture_layout.
For pseudo-paletted formats (gray8...) this size does not include the palette.
However, avpicture_layout doesn't know this and still writes the palette. Consequently,
avpicture_layout writes passed the length of the buffer. This fixes it
by fixing avpicture_layout so that it doesn't write the palette for these formats.
Signed-off-by: Matthew Einhorn <moiein2000@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-19 23:28:04 +02:00
Michael Niedermayer
e31c5ebe11
mpegtsenc: fix handling of large audio packets
...
(sorry i have no sample, just a user report)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-19 23:04:31 +02:00
Janne Grunau
8096fdf0b6
presets: rename presets directory
2011-10-19 21:20:17 +02:00
Clément Bœsch
057161d39b
mpeg12: remove '[' and ']' around last timecode field to match std representation.
2011-10-19 20:56:02 +02:00
Kieran Kunhya
44d27736fc
Add V210 SIMD
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-19 20:26:55 +02:00
Kieran Kunhya
b1766c170c
Move x264asm to libavutil.
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
2011-10-19 20:26:55 +02:00