This function can intrinsically not deal with codec profile fallback
(for H.264 Constrained Baseline especially), and was made redundant
by av_vdpau_bind_context().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Each line is padded by the format, and errors are now reported and
stop the decoding. Around 5% speedup.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Default field order to top field first when interlaced frame is detected and pic_struct_present_flag is not set.
Since bottom field first comes from the old NTSC standard and is not used with HD anymore I think it´s straight forward to favor the majority.
Signed-off-by: Thomas Mundt <loudmax@yahoo.de>
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Around 3x speedup with 4 threads. Maybe more mb lines should be
batched per thread, but that's good enough for a first try.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Indicates a YCbCr->RGB transform at the block level. Although nothing
explicitly states it, this would assume the actual content is planar
RGB.
Currently unsupported, but the one sequence I found using it flagged
every mb that way, actually meaning the content was YCbCr, and thus
best left to the output format to decide what to do of it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It currently only applies to CID 1260, but this flag is dependent on
a higher-level flag located in the header.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'bbf71d46db3417b43bcbd745cbf235e8e2ff69ae':
dxv: Print texture information after header parsing
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
CID 1260 (as evidenced by incorrect decoding of a sample from ticket
4876) seems to use incorrect weight tables. It appears those tables
were not zigzag-scanned.
Apply zigzag on weight tables for new CIDs 1258, 1259, and 1260, and
fix an incorrect chroma table for CID 1256.
Fixes last issue from ticket #4876.
Found-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile.
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
Partially fixes ticket #4876.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch tweaks search_for_pns to be both more
aggressive and more careful when applying PNS. On
the one side, it will again try to use PNS on zero
(or effectively zero) bands. For this, both zeroes
and band_type have to be checked (some ZERO bands
aren't marked in zeroes). On the other side, a more
accurate rate-distortion measure avoids using PNS
where it would cause audible distortion.
Also fixed a small bug in the computation of freq
that caused PNS usage on low-frequency bands during
8-short windows. This allows re-enabling PNS during
8-short.
AVBufferRef.data and AVPacket.data don't need to have the same value.
AVPacket could point anywhere into the buffer. Likewise, the sizes
don't need to be the same.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This works only for extradata sizes up to 128 bytes. Additionally, I
could never actually see it doing anything. The new code using
MMAL_BUFFER_HEADER_FLAG_CONFIG now takes care of this.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
We can send mp4-style data directly. But for some reason, this requires
sending the extradata as buffer with MMAL_BUFFER_HEADER_FLAG_CONFIG
set. Reuse the infrastructure for sending AVPackets to do this.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Commit 7404f3bdb switched bitrate to 64 bits.
This triggers -Wabsolute-value on clang, e.g
http://fate.ffmpeg.org/log.cgi?time=20150917122742&log=compile&slot=x86_64-darwin-clang-3.7-O3.
Therefore, usage of abs is changed to llabs, which is available on all of the platforms.
Unfortunately, LLONG_MAX is not always available, so INT64_MAX is used instead.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch modifies the encode frame function to
retry encoding the frame when the resulting bit count
is too far off target, but only adjusting lambda
in small, incremental step. It also makes the logic
more conservative - otherwise it will contend with
bit reservoir-related variations in bit allocation,
and result in artifacts when frame have to be truncated
(usually at high bit rates transitioning from low
complexity to high complexity).
Reduces the number of times the vbv retry code is used and should have no
effect on quality
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If cmd_pos is broken, this would just keep accumulating packets in the
reassembly buffer, until it fails and flushes the buffer on overflow.
Since packets are usually rather small, this will take a lot of subtitle
packets. The perceived effect is that subtitles are not displayed
anymore after the faulty packet was passed to the decoder.
I'm not terribly sure about this, but on the other hand this code is
active only when fragmented packets need to be reassembled.
Fixes sample file in trac issue #4872.
Assuming the first and second packets are partial, this would append the
reassembly buffer (ctx->buf) to itself with the second
append_to_cached_buf() call, because buf is set to ctx->buf.
I do not know a valid sample file which triggers this, and do not know
if packets can be split into more than 2 sub-packets, but it triggered
with a (differently) broken sample file in trac issue #4872.
With the move of some functions into templates
in aaccoder_twoloop.h and aaccoder_trellis.h,
make checkheaders started failing. Add them to
SKIPHEADERS as should be.
This resolves implementation defined behavior, and also silences -Wabsolute-value in clang 3.5+.
Moreover, the generated asm is identical to before modulo nop padding.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e3d4784eb31b3ea4a97f2d4c698a75fab9bf3d86':
d3d11va: WindowsPhone requires a mutex around ID3D11VideoContext
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '777885983533235ccda5145f96317fc8cd0a18ab':
dcadec: set channel layout in a separate function
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '971177f751a6e2931232accceab438bce277bde8':
dcadec: scan for extensions in a separate function
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This patch refactors the AAC coders to reuse code
between the MIPS port and the regular, portable C code.
There were two main functions that had to use
hand-optimized versions of quantization code:
- search_for_quantizers_twoloop
- codebook_trellis_rate
Those two were split into their own template header
files so they can be inlined inside both the MIPS port
and the generic code. In each context, they'll link
to their specialized implementations, and thus be
optimized by the compiler.
This approach I believe is better than maintaining
several copies of each function. As past experience has
proven, having to keep those in sync was error prone.
In this way, they will remain in sync by default.
Also, an implementation of the dequantized output
argument for the optimized quantize_and_encode
functions is included in the patch. While the current
implementation of search_for_pred still isn't using
it, future iterations of main prediction probably will.
It should not imply any measurable performance hit while
not being used.
Failing earlier causes the context to be insufficiently initialized which
can break decoding future frames with threads
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '95a41311ac3a44773cc4dc407408aca35b1f8e26':
jpeg2000: Factor out band stepsize initialization
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
