The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The residual block data of 16x16 blocks was ignored for b-frames, which
leads to easy-to-identify artifacts. After this patch, the artifacts are
gone. Sample video: svq3_watermark.mov. (Fate results unaffected.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '35685a3c2a1ec09f3c62dcfc4368fe9e92bcddf6':
dsputil: Move ff_shrink* function declarations to separate header
dsputil: Move ff_svq3 function declarations to a separate header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Move some functions from dsputil. The idea is that videodsp contains
functions that are useful for a large and varied set of video decoders.
Currently, it contains emulated_edge_mc() and prefetch().
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'b8f3ab8e6a7ce3627764da53b809628c828d4047':
ac3dec: output planar float only
svq3: make slice type value unsigned to match svq3_get_ue_golomb return type
configure: Have protocols select network code instead of depending on it
Conflicts:
libavcodec/svq3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
golomb: use unsigned arithmetics in svq3_get_ue_golomb()
x86: float_dsp: fix loading of the len parameter on x86-32
takdec: fix initialisation of LOCAL_ALIGNED array
takdec: fix initialisation of LOCAL_ALIGNED array
Conflicts:
libavcodec/rv30.c
libavcodec/svq3.c
libavcodec/takdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents undefined behaviour of signed left shift if the coded
value is larger than 2^31. Large values are most likely invalid and
caused errors or by feeding random.
Validate every use of svq3_get_ue_golomb() and changed the place there
the return value was compared with negative numbers. dirac.c was clean,
fixed rv30 and svq3.
* commit 'e002e3291e6dc7953f843abf56fc14f08f238b21':
Use the new aes/md5/sha/tree allocation functions
avutil: Add functions for allocating opaque contexts for algorithms
svq3: fix pointer type warning
svq3: replace unsafe pointer casting with intreadwrite macros
parseutils-test: various cleanups
Conflicts:
doc/APIchanges
libavcodec/svq3.c
libavutil/parseutils.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes:
libavcodec/svq3.c:661:9: warning: passing argument 2 of 'svq3_decode_block' from incompatible pointer type
libavcodec/svq3.c:208:19: note: expected 'DCTELEM *' but argument is of type 'DCTELEM (*)[32]'
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
asfdec: Add an option for not searching for the packet markers
cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
cosmetics: Align codec declarations
cosmetics: Convert mimic.c to utf-8
avconv: remove an unused function parameter.
avconv: remove now pointless variables.
avconv: drop support for building without libavfilter.
nellymoserenc: fix crash due to memsetting the wrong area.
libavformat: Only require first packet to be known for audio/video streams
avplay: Don't try to scale timestamps if the tb isn't set
Conflicts:
Changelog
configure
ffmpeg.c
libavcodec/aacenc.c
libavcodec/bmpenc.c
libavcodec/dnxhddec.c
libavcodec/dnxhdenc.c
libavcodec/ffv1.c
libavcodec/flacenc.c
libavcodec/fraps.c
libavcodec/huffyuv.c
libavcodec/libopenjpegdec.c
libavcodec/mpeg12enc.c
libavcodec/mpeg4videodec.c
libavcodec/pamenc.c
libavcodec/pgssubdec.c
libavcodec/pngenc.c
libavcodec/qtrleenc.c
libavcodec/rawdec.c
libavcodec/sgienc.c
libavcodec/tiffenc.c
libavcodec/v210dec.c
libavcodec/wmv2dec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also break some long lines, remove codec function placeholder comments
and add spaces in sample/pixel format lists.
Signed-off-by: Martin Storsjö <martin@martin.st>
Results of IDCT can by far outreach the range of ff_cropTbl[], leading
to overreads and potentially crashes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (29 commits)
amrwb: remove duplicate arguments from extrapolate_isf().
amrwb: error out early if mode is invalid.
h264: change underread for 10bit QPEL to overread.
matroska: check buffer size for RM-style byte reordering.
vp8: disable mmx functions with sse/sse2 counterparts on x86-64.
vp8: change int stride to ptrdiff_t stride.
wma: fix invalid buffer size assumptions causing random overreads.
Windows Media Audio Lossless decoder
rv10/20: Fix slice overflow with checked bitstream reader.
h263dec: Disallow width/height changing with frame threads.
rv10/20: Fix a buffer overread caused by losing track of the remaining buffer size.
rmdec: Honor .RMF tag size rather than assuming 18.
g722: Fix the QMF scaling
r3d: don't set codec timebase.
electronicarts: set timebase for tgv video.
electronicarts: parse the framerate for cmv video.
ogg: don't set codec timebase
electronicarts: don't set codec timebase
avs: don't set codec timebase
wavpack: Fix an integer overflow
...
Conflicts:
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/fraps.c
libavcodec/h264.c
libavcodec/mpeg4videodec.c
libavcodec/mpegvideo.c
libavcodec/msmpeg4.c
libavcodec/pnmdec.c
libavcodec/qpeg.c
libavcodec/rawenc.c
libavcodec/ulti.c
libavcodec/vcr1.c
libavcodec/version.h
libavcodec/wmalosslessdec.c
libavformat/electronicarts.c
libswscale/ppc/yuv2rgb_altivec.c
tests/ref/acodec/g722
tests/ref/fate/ea-cmv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (38 commits)
v210enc: remove redundant check for pix_fmt
wavpack: allow user to disable CRC checking
v210enc: Use Bytestream2 functions
cafdec: Check return value of avio_seek and avoid modifying state if it fails
yop: Check return value of avio_seek and avoid modifying state if it fails
tta: Check return value of avio_seek and avoid modifying state if it fails
tmv: Check return value of avio_seek and avoid modifying state if it fails
r3d: Check return value of avio_seek and avoid modifying state if it fails
nsvdec: Check return value of avio_seek and avoid modifying state if it fails
mpc8: Check return value of avio_seek and avoid modifying state if it fails
jvdec: Check return value of avio_seek and avoid modifying state if it fails
filmstripdec: Check return value of avio_seek and avoid modifying state if it fails
ffmdec: Check return value of avio_seek and avoid modifying state if it fails
dv: Check return value of avio_seek and avoid modifying state if it fails
bink: Check return value of avio_seek and avoid modifying state if it fails
Check AVCodec.pix_fmts in avcodec_open2()
svq3: Prevent illegal reads while parsing extradata.
remove ParseContext1
vc1: use ff_parse_close
mpegvideo parser: move specific fields into private context
...
Conflicts:
libavcodec/4xm.c
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/mpeg4video_parser.c
libavcodec/svq3.c
libavcodec/v210enc.c
libavformat/cafdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Conversion of the luma intra prediction mode to one of the constrained
("alzheimer") ones can happen by crafting special bitstreams, causing
a crash because we'll call a NULL function pointer for 16x16 block intra
prediction, since constrained intra prediction functions are only
implemented for chroma (8x8 blocks).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
mxfdec: Include FF_INPUT_BUFFER_PADDING_SIZE when allocating extradata.
H.264: tweak some other x86 asm for Atom
probe: Fix insane flow control.
mpegts: remove invalid error check
s302m: use nondeprecated audio sample format API
lavc: use designated initialisers for all codecs.
x86: cabac: add operand size suffixes missing from 6c32576
Conflicts:
libavcodec/ac3enc_float.c
libavcodec/flacenc.c
libavcodec/frwu.c
libavcodec/pictordec.c
libavcodec/qtrleenc.c
libavcodec/v210enc.c
libavcodec/wmv2dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
FF_COMMON_FRAME holds the contents of the AVFrame structure and is also copied
to struct Picture. Replace by an embedded AVFrame structure in struct Picture.
* qatar/master: (40 commits)
H.264: template left MB handling
H.264: faster fill_decode_caches
H.264: faster write_back_*
H.264: faster fill_filter_caches
H.264: make filter_mb_fast support the case of unavailable top mb
Do not include log.h in avutil.h
Do not include pixfmt.h in avutil.h
Do not include rational.h in avutil.h
Do not include mathematics.h in avutil.h
Do not include intfloat_readwrite.h in avutil.h
Remove return statements following infinite loops without break
RTSP: Doxygen comment cleanup
doxygen: Escape '\' in Doxygen documentation.
md5: cosmetics
md5: use AV_WL32 to write result
md5: add fate test
md5: include correct headers
md5: fix test program
doxygen: Drop array size declarations from Doxygen parameter names.
doxygen: Fix parameter names to match the function prototypes.
...
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/flvenc.c
libavformat/oggenc.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
swscale: remove misplaced comment.
ffmpeg: fix streaming to ffserver.
swscale: split out RGB48 output functions from yuv2packed[12X]_c().
build: move vpath directives to main Makefile
swscale: fix JPEG-range YUV scaling artifacts.
build: move ALLFFLIBS to a more logical place
ARM: factor some repetitive code into macros
Fix SVQ3 after adding 4:4:4 H.264 support
H.264: fix CODEC_FLAG_GRAY
4:4:4 H.264 decoding support
ac3enc: fix allocation of floating point samples.
Conflicts:
ffmpeg.c
libavcodec/dsputil_template.c
libavcodec/h264.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libswscale/swscale.c
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
build: simplify commands for clean target
swscale: split swscale.c in unscaled and generic conversion routines.
swscale: cosmetics.
swscale: integrate (literally) swscale_template.c in swscale.c.
swscale: split out x86/swscale_template.c from swscale.c.
swscale: enable hScale_altivec_real.
swscale: split out ppc _template.c files from main swscale.c.
swscale: remove indirections in ppc/swscale_template.c.
swscale: split out unscaled altivec YUV converters in their own file.
mpegvideoenc: fix multislice fate tests with threading disabled.
mpegts: Wrap #ifdef DEBUG and av_hex_dump_log() combination in a macro.
build: Simplify texi2html invocation through the --output option.
Mark some variables with av_unused
Replace avcodec_get_pix_fmt_name() by av_get_pix_fmt_name().
svq3: Check negative mb_type to fix potential crash.
svq3: Move svq3-specific fields to their own context.
rawdec: initialize return value to 0.
Remove unused get_psnr() prototype
rawdec: don't leak option strings.
bktr: get default framerate from video standard.
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ffmpeg: get rid of the -vglobal option.
dct32: Add AVX implementation of 32-point DCT
dct32: Change pass 6 permutation to allow for AVX implementation
dct32: port SSE 32-point DCT to YASM
multiple inclusion guard cleanup
avio: document buffer must created with av_malloc() and friends
avio: check AVIOContext malloc failure
swscale: point out an alternative to sws_getContext
svq3: Do initialization after parsing the extradata
add changelog entries for 0.7_beta2
mp3lame: add #include required for AV_RB32 macro.
Conflicts:
Changelog
libavcodec/svq3.c
libavcodec/x86/dct32_sse.c
libavfilter/vsrc_buffer.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If done before, some parameters aren't known yet.
With svq3/rtp, initializing before some parameters are known
can lead to calling av_malloc(0), which on OS X currently returns
broken pointers.
* qatar/master:
Fixed-point MDCT with 32-bit unscaled output
lavc: deprecate rate_emu
lavc: mark hurry_up for removal on next major bump
parser: mark av_parser_parse() for removal on next major bump
lavc: add missing audioconvert includes
jvdec: don't use deprecated CODEC_TYPE_*/PKT_FLAG_KEY
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
None of these symbols should be accessed directly, so declare them as
hidden.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit d36beb3f69)
No speed improvement, but necessary for some future stuff.
Also opens up the possibility of asm chroma dc idct/dequant.
Originally committed as revision 26349 to svn://svn.ffmpeg.org/ffmpeg/trunk
Doesn't help speed as there isn't an asm implementation yet, but consistency
is a good thing.
Originally committed as revision 26348 to svn://svn.ffmpeg.org/ffmpeg/trunk
About 2.5x the speed.
NOTE: the way that the asm code handles large qmuls is a bit suboptimal.
If x264-style dequant was used (separate shift and qmul values), it might
be possible to get some extra speed.
Originally committed as revision 26336 to svn://svn.ffmpeg.org/ffmpeg/trunk
svq3 still doesn't support multithreading, but it's simpler for clients if
they can enable threading for all codecs by default.
Originally committed as revision 26015 to svn://svn.ffmpeg.org/ffmpeg/trunk
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
svq3 decoder does not work yet though but i didnt want to keep compilation
broken longer
Originally committed as revision 22060 to svn://svn.ffmpeg.org/ffmpeg/trunk