* commit '66e9f839536238945fbfe9d2041b6891cb150e45':
libfdk-aacdec: Enable Dynamic Range Control Metadata Support
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For streams which contain DRC metadata, the FDK decoder is able to
control rendering of the decoded output. The rendering parameters
are detailed in fdk_aac_dec_options [].
The default behavior is left up to the decoder.
Signed-off-by: Martin Storsjö <martin@martin.st>
The FDK decoder is capable of producing mono and stereo downmix from
multichannel streams. These streams may contain metadata that control
the downmix process. The decoder requires an Ancillary Buffer in order to
correctly apply downmix in streams containing downmix Metadata. The
decoder does not have an API interface to inform of the presence of
Metadata in the stream, and therefore the Ancillary Buffer is always
allocated whenever a downmix is requested.
When downmixing multichannel streams, the decoder requires the output
buffer in aacDecoder_DecodeFrame call to be of fixed size in order to
hold the actual number of channels contained in the stream. For example,
for a 5.1ch to stereo downmix, the decoder requires that the output buffer
is allocated for 6 channels, regardless of the fact that the output is in
fact two channels.
Due to this requirement, the output buffer is allocated for the maximum
output buffer size in case a downmix is requested (and also during
decoder init). When a downmix is requested, the buffer used for output
during init will also be used for the entire duration the decoder is open.
Otherwise, the initial decoder output buffer is freed and the decoder
decodes straight into the output AVFrame.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
Decoding acceleration may work even if the codec level is higher than
the stated limit of the VDPAU driver. Or the problem may be considered
acceptable by the user. This flag allows skipping the codec level
capability checks and proceed with decoding.
Applications should obviously not set this flag by default, but only if
the user explicitly requested this behavior (and presumably knows how
to turn it back off if it fails).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '2df0c32ea12ddfa72ba88309812bfb13b674130f':
lavc: use a separate field for exporting audio encoder padding
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/avcodec.h
libavcodec/libvorbisenc.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
The register function now specifies that the user callback should
leave things in the same state that it found them on failure but
that failure to destroy is ignored by the library. The register
function is now explicit about its behavior on failure
(it unregisters the previous callback and destroys all mutex).
Signed-off-by: Manfred Georg <mgeorg@google.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This function provides an explicit VDPAU device and VDPAU driver to
libavcodec, so that the application is relieved from codec specifics
and VdpDevice life cycle management.
A stub flags parameter is added for future extension. For instance, it
could be used to ignore codec level capabilities (if someone feels
dangerous).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add CODEC_FLAG2_SKIP_MANUAL (exposed as "skip_manual"), which makes
the decoder export sample skip information via side data, instead
of applying it automatically. The format of the side data is the
same as AV_PKT_DATA_SKIP_SAMPLES, but since AVPacket and AVFrame
side data constants overlap, AV_FRAME_DATA_SKIP_SAMPLES needs to
be introduced.
This is useful for applications which want to do the timestamp
calculations manually, or which actually want to retrieve the
padding.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The encoder produces files that are no longer compatible with previous
versions of the decoder, and may actually cause decoding issues for other
software, so indicate that change to allow decoder quirks.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cc1d8c54c19dd14fb851e3e7a7793d6b3bd75e94':
avcodec: Postpone FF_IDCT_XVIDMMX removal until the next version bump
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It causes build failures in some cases and the functions are provided by
libavutil so the wraper should not be needed anymore
Found-by: jamrial
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some applications still use this deprecated API
Its not nice to remove it when its still in use and as long as it doesnt
cause us any work to keep it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This prevents a build failure when bumping.
the uses could easily be updated / removed, if people prefer.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f4c444e17d137c786f0ed2da0e5943df505d5f9e':
Postpone API-incompatible changes until the next bump.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It allows attaching other external, opaque data to the frame and passing it
through the reordering process, for cases when the caller wants other data
than just the plain packet pts. There is no way to cleanly achieve this
without the field.
* commit 'c5fca0174db9ed45be821177f49bd9633152704d':
lavc: add a property for marking codecs that support frame reordering
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This provides a public sustainable API/ABI for DCT functions.
Only externally used dct functions are included.
The structure is extensible without ABI issues compared to the
existing dct contexts.
See Mailing list and IRC log of 2014-07-26/27
Reviewed-by: ubitux
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f6ee61fb05482c617f5deee29a190d8ff483b3d1':
lavc: export DV profile API used by muxer/demuxer as public
Conflicts:
configure
doc/APIchanges
libavcodec/Makefile
libavcodec/dv_profile.c
libavcodec/dv_profile.h
libavcodec/version.h
libavformat/dvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1e9a93bfca2c2f43a07e01f2ef9fd5cbafe6c22d':
libfdk-aacdec: Decode the first AAC frame to reliably identify the bitstream
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For implicit signaling cases (as possible for Spectral Band Replication
and Parametric Stereo Tools), the decoder must decode the first frame to
correctly identify the stream configuration (as called from
avformat_find_stream_info). The mechanism for this is built-in and only
requires adding CODEC_CAP_CHANNEL_CONF to the libfdk-aacdec AVCodec
struct.
Signed-off-by: Omer Osman <omer.osman@iis.fraunhofer.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e0bfe34ea8ccf333ec5b17961fd58eb575e74f8b':
libfdk-aacdec: Reduce the default decoder delay by one frame
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The default error concealment method if none is set via
aacDecoder_SetParam(AAC_CONCEAL_METHOD) is set in
CConcealment_InitCommonData within the fdk-aac library
and is set to Energy Interpolation. This method requires one frame
delay to the output. To reduce the default decoder output delay and
avoid missing the last frame in file based decoding, use Noise
Substitution as the default concealment method.
Signed-off-by: Omer Osman <omer.osman@iis.fraunhofer.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '874390e163427c1fe7682ab27924a7843780dbb3':
lavc: add a convenience function for rescaling timestamps in a packet
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0957b274e312e985d69cb490bee2a7ff820acaa6':
lavc: add an option to enable side data-only packets during encoding
Conflicts:
libavcodec/avcodec.h
libavcodec/options_table.h
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some encoders (e.g. flac) need to send side data when there is no more
data to be output. This enables them to output a packet with no data in
it, only side data.
Based off the srt encoder. The following features are unimplemented:
- fonts, colors, sizes
- alignment and positioning
The rest works well. For example, use ffmpeg to convert subtitles into the .vtt format:
ffmpeg -i input.srt output.vtt
Signed-off-by: Aman Gupta <ffmpeg@tmm1.net>
Signed-off-by: Clément Bœsch <u@pkh.me>
* commit '21f68c2489cba2a1a4a41d0c5c828266e6162800':
avcodec: bump version after rotation api
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Right now, the caller has to manually manage some allocated
AVCodecContext fields, like extradata or subtitle_header. This is
fragile and prone to leaks, especially if we want to add more such
fields in the future.
The only reason for this behaviour is so that the AVStream codec context
can be reused for decoding. Such reuse is discouraged anyway, so this
commit is the first step to deprecating it.
* commit 'b70d7a4ac72d23f3448f3b08b770fdf5f57de222':
lavc: add a native Opus decoder.
Conflicts:
Changelog
configure
libavcodec/version.h
Fate tests pass with both avresample as well as swresample based opus decoder, but
are disabled (reference files are very large so i want to think a day or 2 about
if theres an alternative or if they could be avoided, they also dont match the
official samples)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
This makes libavcodec/libx264.c behave more similar to the x264 command line
util
Fixes Ticket3307
Implementation based on x264
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6484149158b6fc6d13d2b2ef84cb26a2d3275400':
lavc: make the xvid-specific "gmc" flag a private option of libxvid
Conflicts:
libavcodec/libxvid.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ed4b757177f9b563412cdbc8ee3405d82e10fc05':
dxva2_h264: add a workaround for old Intel GPUs
Conflicts:
doc/APIchanges
libavcodec/version.h
See: 8b2a130d3f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Old Intel GPUs expect the reference frame index to the actual surface,
instead of the index into RefFrameList as specified by the spec.
This workaround should be set when using one of the "ClearVideo" decoder
devices.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '5ce7ca68b86856ee8e9d6530dffdadc4eca4f8d1':
libxvid: add working lumimasking and variance AQ
Conflicts:
libavcodec/libxvid.c
libavcodec/version.h
See: ccb212b6c3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The old implementation is unusable due to changes in the Xvid API.
Further fixes by Michael Niedermayer <michaelni@gmx.at>.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit '6f273093e54cba130f3ffde3d6433e74baa4ad89':
LucasArts SMUSH VIMA audio decoder
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavcodec/vima.c
This commit adds a AV_CODEC_ID_ADPCM_VIMA alias in addition to the previously
used AV_CODEC_ID_VIMA, as well as a AVCodec with name "adpcm_vima" in addition
to the previously used name "vima"
These changes are needed for compatibility with the renamed codec in libav
See: b18357326c and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Further performance improvements and security fixes by
Vittorio Giovara, Luca Barbato and Diego Biurrun.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Additional fixes and enhancements by Vittorio Giovara, Gonzalo Garramuno,
Nicolas George, Paul B Mahol and Michael Niedermayer.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* qatar/master:
libmp3lame: add ABR support
Conflicts:
libavcodec/libmp3lame.c
libavcodec/version.h
See: d3211cfaed
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5a7e35dd2351c30bab45177b9482cb8833a0ca78':
Add replaygain side data type and code for parsing replaygain tags.
Conflicts:
libavcodec/avcodec.h
libavcodec/version.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0e2c3ee9a335d8a0a5edf0509e222e804d7b2619':
lavc: give a typedeffed name to the AVPacket.side_data struct
Conflicts:
doc/APIchanges
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b4dd424d96f09f9bafb88e47f37df65dc4529143':
Remove all SPARC architecture optimizations
Conflicts:
Makefile
configure
libavcodec/sparc/dsputil_vis.c
libavcodec/sparc/dsputil_vis.h
libavcodec/sparc/hpeldsp_vis.c
libavcodec/sparc/simple_idct_vis.c
libavcodec/sparc/vis.h
libswscale/sparc/yuv2rgb_vis.c
libswscale/swscale_internal.h
If someone wants to maintain these (or other) SPARC optimizations, please
contact me or ffmpeg-devel.
I am happy to revert this removial if theres someone considering to
maintain this code.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd6096a67422534918405abb46dafbbac4608cbc3':
Remove all SH4 architecture optimizations
Conflicts:
libavcodec/sh4/dsputil_sh4.c
libavcodec/sh4/dsputil_sh4.h
libavcodec/sh4/idct_sh4.c
libavcodec/sh4/sh4.h
If someone wants to maintain these (or other) SH4 optimizations, please
contact me or ffmpeg-devel.
I am happy to revert this removial if theres someone considering to
maintain this code.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9cd4bc41760f8ad879e248920eacbe1e7757152c':
ac3dec: set AV_FRAME_DATA_DOWNMIX_INFO side data.
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improved DVB subtitles encoder to generate AVPacket.data in the same
format as generates MPEGTS demuxer + DVB subtitles parser. So now single
format of DVB subtitles data is used across all the components of FFmpeg:
only subtitles payload WITHOUT 0x20 0x00 bytes at the beginning and 0xFF
trailing byte.
Improved MPEGTS muxer to support format of DVB subtitles in
AVPacket.data described above: while muxing we add two bytes 0x20 0x00 to
the beginning of and 0xFF to the end of DVB subtitles payload.
The patch fixes DVB subtitle copy problems: tickets #2989 fully and #2024
partly.
Signed-off-by: Clément Bœsch <u@pkh.me>
