Also correct the check to reject log < 7, because UPDATE_CACHE only
guarantees 25 meaningful bits.
This fixes undefined behavior:
runtime error: shift exponent is negative
Testing with START/STOP timers in get_ue_golomb, one for the first
branch (A) and one for the second (B), shows that there is practically no
slowdown, e.g. for the cavs decoder:
With the check in the B branch:
629 decicycles in get_ue_golomb B, 4194260 runs, 44 skips
433 decicycles in get_ue_golomb A,268434102 runs, 1354 skips
Without the check:
624 decicycles in get_ue_golomb B, 4194273 runs, 31 skips
433 decicycles in get_ue_golomb A,268434203 runs, 1253 skips
Since the B branch is executed far less often than the A branch, this
change is negligible, even more so for the h264 decoder, where the ratio
B/A is a lot smaller.
Fixes: mozilla bug 1230239
Fixes: fbeb8b2c7c996e9b91c6b1af319d7ebc/asan_heap-oob_195450f_2743_e8856ece4579ea486670be2b236099a0.bit
Found-by: Tyson Smith
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
PSNR doesn't change as expected. The AAC spec doesn't really say
anything about how exactly to generate noise.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The limit is a conservative guess, the spec does not seem to specify a limit
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The transpose_4x4H is wrong which cost me much time to find this bug. The orders of r2 and r3 are wrong,
this bug waste me much time while I make aarch64 arm instruction which used the function.
This also removes a #ifdef and special case for the fixed point case
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the input contains too many too large values, the imdct can overflow.
Even if it didn't, the output would be larger than the valid range of 29
bits.
Note that this is a very delicate limit: Allowing values up to 1<<25
does not prevent input larger than 1<<29 from arriving at
sbr_sum_square, while limiting values to 1<<23 breaks the
fate-aac-fixed-al_sbr_hq_cm_48_5.1 test.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix OOB access in search_for_pns which was using
w2 outside the window group loop, and fix a typo
in which it was checking sf_idx instead of band_type
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This gets rid of virtually useless hardcoded tables hackery. The reason
it is useless is that a 320 element lut is anyway placed regardless of
--enable-hardcoded-tables, from which all necessary tables are trivially
derived at runtime at very low cost:
sample benchmark (x86-64, Haswell, GNU/Linux, single run is really
what is relevant here since looping drastically changes the bench). Fluctuations
are on the order of 10% for the single run test:
39400 decicycles in aacsbr_tableinit, 1 runs, 0 skips
25325 decicycles in aacsbr_tableinit, 2 runs, 0 skips
18475 decicycles in aacsbr_tableinit, 4 runs, 0 skips
15008 decicycles in aacsbr_tableinit, 8 runs, 0 skips
13016 decicycles in aacsbr_tableinit, 16 runs, 0 skips
12005 decicycles in aacsbr_tableinit, 32 runs, 0 skips
11546 decicycles in aacsbr_tableinit, 64 runs, 0 skips
11506 decicycles in aacsbr_tableinit, 128 runs, 0 skips
11500 decicycles in aacsbr_tableinit, 256 runs, 0 skips
11183 decicycles in aacsbr_tableinit, 509 runs, 3 skips
Tested with FATE with/without --enable-hardcoded-tables.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
pow is a very wasteful function for this purpose. A low hanging fruit
would be simply to replace with exp2f, and that does yield some speedup.
However, there are 2 drawbacks of this:
1. It does not exploit the integer nature of the argument.
2. (minor) Some platforms lack a proper exp2f routine, making benefits available
only to non broken libm.
3. exp2f does not solve the same issue that plagues pow, namely terrible
worst case performance. This is a fundamental issue known as the
"table-maker's dilemma" recognized by Prof. Kahan himself and
subsequently elaborated and researched by many others. All this is clear from benchmarks below.
This exploits the IEEE-754 format to get very good performance even in
the worst case for integer powers of 2. This solves all the issues noted
above. Function tested with clang usan over [-1000, 1000] (beyond range of
relevance for this, which is [-255, 255]), patch itself with FATE.
Benchmarks obtained on x86-64, Haswell, GNU-Linux via 10^5 iterations of
the pow call, START/STOP, and command ffplay ~/samples/jpeg2000/chiens_dcinema2K.mxf.
Low number of runs also given to prove the point about worst case:
pow:
216270 decicycles in pow, 1 runs, 0 skips
110175 decicycles in pow, 2 runs, 0 skips
56085 decicycles in pow, 4 runs, 0 skips
29013 decicycles in pow, 8 runs, 0 skips
15472 decicycles in pow, 16 runs, 0 skips
8689 decicycles in pow, 32 runs, 0 skips
5295 decicycles in pow, 64 runs, 0 skips
3599 decicycles in pow, 128 runs, 0 skips
2748 decicycles in pow, 256 runs, 0 skips
2304 decicycles in pow, 511 runs, 1 skips
2072 decicycles in pow, 1022 runs, 2 skips
1963 decicycles in pow, 2044 runs, 4 skips
1894 decicycles in pow, 4091 runs, 5 skips
1860 decicycles in pow, 8184 runs, 8 skips
exp2f:
134140 decicycles in pow, 1 runs, 0 skips
68110 decicycles in pow, 2 runs, 0 skips
34530 decicycles in pow, 4 runs, 0 skips
17677 decicycles in pow, 8 runs, 0 skips
9175 decicycles in pow, 16 runs, 0 skips
4931 decicycles in pow, 32 runs, 0 skips
2808 decicycles in pow, 64 runs, 0 skips
1747 decicycles in pow, 128 runs, 0 skips
1208 decicycles in pow, 256 runs, 0 skips
952 decicycles in pow, 512 runs, 0 skips
822 decicycles in pow, 1024 runs, 0 skips
765 decicycles in pow, 2047 runs, 1 skips
722 decicycles in pow, 4094 runs, 2 skips
693 decicycles in pow, 8190 runs, 2 skips
exp2fi:
2740 decicycles in pow, 1 runs, 0 skips
1530 decicycles in pow, 2 runs, 0 skips
955 decicycles in pow, 4 runs, 0 skips
622 decicycles in pow, 8 runs, 0 skips
477 decicycles in pow, 16 runs, 0 skips
368 decicycles in pow, 32 runs, 0 skips
317 decicycles in pow, 64 runs, 0 skips
291 decicycles in pow, 128 runs, 0 skips
277 decicycles in pow, 256 runs, 0 skips
268 decicycles in pow, 512 runs, 0 skips
265 decicycles in pow, 1024 runs, 0 skips
263 decicycles in pow, 2048 runs, 0 skips
263 decicycles in pow, 4095 runs, 1 skips
260 decicycles in pow, 8191 runs, 1 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This fixes out-of-bounds reads in avoid_clipping.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
In the merge commit 78265fcfee this behaviour
was broken and the CORRUPT flag would never ever be set on a frame. However
the flag on the AVCodecContext was taken into account properly, including
AV_CODEC_FLAG2_SHOW_ALL.
The reason for this was that the recovered field of the next output picture
was always set to TRUE whenever one of the two AVCodecContext flags was set,
which made it impossible to detect later, before outputting, if the frame was
really recovered or not. Now don't set it to TRUE unless the frame is really
recovered and check the AVCodecContext flags right before outputting.
Signed-off-by: Sebastian Dröge <sebastian@centricular.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With only 7 coefficients per short window at most the extra precision
makes a difference and seems to reduce crackling and stddev even
further.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
* commit 'b805482b1fba1d82fbe47023a24c9261f18979b6':
aac: Provide more information on the failure message
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Don't print a warning when dcadec_context_filter() returns positive
warning code. Most relevant warnings are now output through the callback
function.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Take request_channel_layout as a hint and don't force 2.0 downmix by
using both the 2CH and 6CH flags together.
Remove warnings about missing coefficients because they are no longer
relevant.
Honor AV_CH_LAYOUT_NATIVE and make it possible for native DTS channel
layout to be output.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'f023d57d355ff3b917f1aad9b03db5c293ec4244':
lavc: G.723.1 encoder
Split existing FFmpeg G.723.1 encoder into a new file.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '165cc6fb9defcd79fd71c08167f3e8df26b058ff':
g723_1: Move sharable functions to a separate file
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'aac996cc01042194bf621d845bbe684549b5882e':
g723_1: Rename files to better reflect their purpose
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b74b88f30da2389f333a31815d8326d5576d3331':
g723_1: Handle values at the ends of the table in lsp2lpc()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
