This is needed for matroska spec compliance
Fixes playback of SVQ3 in matroska with vlc
Fixes Ticket 3256
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This occurs for video codecs that have codec_tag set, but are are not listed
in ff_codec_bmp_tags (e.g. AV_CODEC_ID_BINKAUDIO, AV_CODEC_ID_IFF_ILBM).
Fixes ticket #3269.
Signed-off-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
according to the Matriska Specification
http://matroska.org/technical/specs/index.html
DiscardPadding is a signed integer.
Tested-by: Jan Gerber <j@v2v.cc>
Tested-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use it only on subtitle CuePoints.
With proper demuxer/splitter support this should improve the display
of subtitles right after seeking to a given point in the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Files won't validate with mkvalidtor if these two elements are missing.
Use a const "Lavf" string that wont change with library version bumps.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The muxer has been creating files with v4 elements for some time now,
and especially now that we can mux non-experimental Opus files, reporting
the DocTypeVersion as 2 is not correct.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
matroskaenc: Fix stray pointers left over from av_reallocp_array refactoring
Conflicts:
libavformat/matroskaenc.c
Mostly not merged as the buggy code was no longer part of FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In order to represent the codec delay accurately in Matroska, a
new element CodecDelay has been introduced. It contains the
overall delay added by the codec in nanoseconds. This patch adds
support for muxing CodecDelay value in the container.
Matroska spec for CodecDelay element can be found here:
http://matroska.org/technical/specs/index.html#CodecDelay
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Support for end trimming Opus in Matroska is implemented by using
the DiscardPadding container element in the Block data. The last
chunk is stored as a Block instead of SimpleBlock and the
trimming information is stored and used to discard samples that
were padded by the Opus codec. This patch adds support for muxing
DiscardPadding element into the container with appropriate value.
Matroska spec for the DiscardPadding element can be found here:
http://matroska.org/technical/specs/index.html#DiscardPadding
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a bunch of possible overread in avformat with the idiom p +=
strcspn(p, "\n") + 1 (strcspn() can focus on the trailing '\0' if no
'\n' is found, so the +1 leads to an overread).
Note on lavf/matroskaenc: no extra subtitles.o Makefile dependency is
added because only the header is required for ff_subtitles_next_line().
Note on lavf/mpsubdec: code gets slightly complex to avoid an infinite
loop in the probing since there is no more forced increment.
* qatar/master:
matroskaenc: Allow chapters to be written in trailer
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows creation of frame accurate chapter marks from sources like
DVD and BD where the precise chapter location is not known until the
chapter mark has been reached during reading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'b886f5c2f1e71b3e60e4265c500158d392b4b9a4':
mkv: Allow flushing the current cluster in progress
Conflicts:
libavformat/matroskaenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '59f595921eb2b848a80a74aa81b6bb43038c9ebe':
mkv: Flush the old cluster before writing a new one
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow emitting the current cluster that is being written before
starting a new one, simplifying how to figure out where clusters
are positioned in the output stream (for live streaming).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In order to encapsuate Opus in Matroska, there is a new element
that has been added to the Matroska Spec, SeekPreRoll. It has the
duration in nanoseconds that has to be decoded before every seek.
Spec: http://matroska.org/technical/specs/index.html#SeekPreRoll
Proposal for encapsulateing Opus in Matroska:
http://wiki.xiph.org/MatroskaOpus
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a minimal change to matroskaenc that implements CueRelativePosition in the output.
Most players will probably ignore this additional information, but it is in the
matroska spec, and it'd be nice to be able to make use of it.
Signed-off-by: Bernt Habermeier <bernt@wulfram.com>
Tested-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also fixes the case where negative chapter ids where input
And fixes the case where remuxing from mkv changed chapter ids
Found-by: Luca Barbato
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tags must have at least one SimpleTag element to be spec conformant.
Updated lavf-mkv and seek-lavf-mkv FATE references as the tests were affected by
this.
Fixes ticket #2785
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The Matroska muxer now allows WebVTT subtitle tracks to be written
while in WebM muxing mode.
WebVTT subtitle tracks have four kinds: "subtitles", "captions",
"descriptions", and "metadata". Each text track kind has a distinct
Mastroska CodecID and track type, as described in the temporal
metadata guidelines here:
http://wiki.webmproject.org/webm-metadata/temporal-metadata/webvtt-in-webm
When the stream has codec id AV_CODEC_ID_WEBVTT, the stream packet is
serialized per the temporal metadata guidelines cited above. The
WebVTT cue is written as a Matroska block group. The block frame
comprises the WebVTT cue id, followed by the cue settings, followed by
the cue text. (The block timestamp is synthesized from the cue
timestamp.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c3e58f8fb75d8467161a65b85eb88281547ebab1':
matroskaenc: restore compatibility with non referenced AVPacket
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds support for muxing VP8 Alpha Files. The Alpha channel data is
placed in BlockAdditional element of the matroska container. More information
& exact spec on how this is implemented can be found here: http://goo.gl/wCP1y
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e3b225a4fe0ff1e64a220b757c6f0a5cf9258521':
matroskaenc: add an option to put the index at the start of the file
Conflicts:
doc/muxers.texi
libavformat/matroskaenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
Avoid to write more than one cuepoint per track and PTS in
mkv_write_cues(). This avoids a later assertion failure on "(bytes >=
needed_bytes)" in put_ebml_num() called from end_ebml_master(), in case
there are several cuepoints per track with the same PTS.
This may happen with files containing packets with duplicated PTS in the
same track.
This reverts 312645e :
"Do not set codec_tag property for matroska muxers."
Also adds dummy codec_tag lists with codecs
supported in mkv but not in wav / avi.
Fixes ticket #2169.
This fixes playback in some circumstances (like webm in firefox).
Regression after 2c34367b.
It is also matching the Matroska specifications:
http://matroska.org/technical/specs/notes.html, "The quick eye will
notice that if a Cluster's Timecode is set to zero, it is possible to
have Blocks with a negative Raw Timecode. Blocks with a negative Raw
Timecode are not valid."
* commit 'b94e4acb4874843e914fd3cb8e089aff0756bb4a':
cmdutils_read_file: increment *size after writing the trailing \0
af_resample: unref out_buf when avresample_convert returns 0
af_amix: prevent memory leak on error path
vc1dec: prevent memory leak in error path
vc1dec: prevent memory leak on av_realloc error
af_channelmap: free old extended_data on reallocation
avconv: simplify memory allocation in copy_chapters
matroskaenc: check cue point validity before reallocation
swfenc: error out for more than 1 audio or video stream
build: link test programs only against static libs
Conflicts:
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '117d8c6d1f1c187ffc6098d9618457e00534e013':
matroska: implement support for ProRes
matroska: implement support for ALAC
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Support Matroska native formatting.
On demuxing prepend a Frame container atom (32bit big endian encoded
frame size and 'icpf' string).
On muxing remove it.
* commit '3f7fd59d151a2773f0e2e93e56b6b13ec6e5334b':
avformat: fix typo in avformat_close_input
mp3enc: write Xing TOC
mp3enc: support MPEG-2 and MPEG-2.5 in Xing header.
mp3enc: downgrade some errors in writing Xing frame to warnings
lavf: flush the output AVIOContext in av_write_trailer().
lavf: cosmetics, reformat av_write_trailer().
avio: flush the internal buffer in avio_close()
Enhance doc on asyncts audiofilter
cmdutils: avoid setting data pointers to invalid values in alloc_buffer()
libavcodec: remove av_destruct_packet_nofree()
Conflicts:
libavcodec/avpacket.c
libavformat/mp3enc.c
libavformat/nutenc.c
libavformat/utils.c
libavformat/version.h
tests/ref/lavf/voc
tests/ref/lavf/voc_s16
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
After much discussion and back-and-forth, we reached the conclusion
that matroska uses convergence_duration for subtitle duration because
a 32bit value isn't large enough to store the duration if sub-micro-second
timebases are used. Matroska may not be the only one that supports these
timebases, but it's certainly the only one that ffmpeg attempts to support
in this way.
The long term solution that we seemed to reach was that if we encounter
a matroska file with a sub-micro-second timebase, we should internally
scale it up to at least micro-second, and then duration can be used
normally. This suggests that on the encode side, we should not allow
generation of files with sub-micro-second timebases, but that's a separate
issue.
That being a non-trivial change, and the subtitle interoperability breakage
being very real, I'm re-submitting this small change for consideration.
In this diff, we make sure that duration is populated by the matroska
demuxer, and that convergence_duration is respected in matroskaenc and
srtenc, but that duration is used otherwise. This ends up being a strict
improvement - pipelines that use convergence duration are unchanged, and
ones that are currently broken due to the duration mismatch will start
working - except for the ones with the extreme timebases, but those were
already broken.
Signed-off-by: Philip Langdale <philipl@overt.org>
* qatar/master:
avformat: Drop pointless "format" from container long names
swscale: bury one more piece of inline asm under HAVE_INLINE_ASM.
wv: K&R formatting cosmetics
configure: Add missing descriptions to help output
h264_ps: declare array of colorspace strings on its own line.
fate: amix: specify f32 sample format for comparison
tiny_psnr: support 32-bit float samples
eamad/eatgq/eatqi: call special EA IDCT directly
eamad: remove use of MpegEncContext
mpegvideo: remove unnecessary inclusions of faandct.h
af_asyncts: avoid overflow in out_size with large delta values
af_asyncts: add first_pts option
Conflicts:
configure
libavcodec/eamad.c
libavcodec/h264_ps.c
libavformat/crcenc.c
libavformat/ffmdec.c
libavformat/ffmenc.c
libavformat/framecrcenc.c
libavformat/md5enc.c
libavformat/nutdec.c
libavformat/rawenc.c
libavformat/yuv4mpeg.c
tests/tiny_psnr.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
v410dec: Implement explode mode support
zerocodec: fix direct rendering.
wav: init st to NULL to avoid a false-positive warning.
wavpack: set bits_per_raw_sample for S32 samples to properly identify 24-bit
h264: refactor NAL decode loop
RTMPTE protocol support
RTMPE protocol support
rtmp: Add ff_rtmp_calc_digest_pos()
rtmp: Rename rtmp_calc_digest to ff_rtmp_calc_digest and make it global
swscale: add missing HAVE_INLINE_ASM check.
lavfi: place x86 inline assembly under HAVE_INLINE_ASM.
vc1: Add a test for interlaced field pictures
swscale: Mark all init functions as av_cold
swscale: x86: Drop pointless _mmx suffix from filenames
lavf: use conditional notation for default codec in muxer declarations.
swscale: place inline assembly bilinear scaler under HAVE_INLINE_ASM.
dsputil: ppc: cosmetics: pretty-print
dsputil: x86: add SHUFFLE_MASK_W macro
configure: respect CC_O setting in check_cc
Conflicts:
Changelog
configure
libavcodec/v410dec.c
libavcodec/zerocodec.c
libavformat/asfenc.c
libavformat/version.h
libswscale/utils.c
libswscale/x86/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
