On 12 frames of a 444p 12 bits DNxHR sequence, _put function:
C: 78902 decicycles in idct, 262071 runs, 73 skips
avx: 32478 decicycles in idct, 262045 runs, 99 skips
Difference between the 2:
stddev: 0.39 PSNR:104.47 MAXDIFF: 2
This is unavoidable and due to the scale factors used in the x86
version, which cannot match the C ones.
In addition, the trick of adding an initial bias to the input of a
pass can overflow, as the input coefficients are already 15bits,
which is the maximum this function can handle.
Overall, however, the omse on 12 bits samples goes from 0.16916 to
0.16883. Reducing rowshift by 1 improves to 0.0908, but causes
overflows.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Modeled from the prores version. Clips to [0;1023] and is bitexact.
Bitexactness requires to add offsets in different places compared to
prores or C, and makes the function approximately 2% slower.
For 16 frames of a DNxHD 4:2:2 10bits test sequence:
C: 60861 decicycles in idct, 1048205 runs, 371 skips
sse2: 27567 decicycles in idct, 1048216 runs, 360 skips
avx: 26272 decicycles in idct, 1048171 runs, 405 skips
The add version is not implemented, so the corresponding dsp
function is set to NULL to make it clear in a code executing it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the input of a pass has 15 or 16 bits of precision (in particular
the column pass), the addition of a bias to W4 may lead to overflows
in the input to pmaddwd.
This requires postponing the adding of the bias to after the first
butterfly. To do so, the fact that m15, unused although zeroed, is
exploited. In case the pass is safe, an address can be directly used,
and the number of xmm regs can be decreased. Otherwise, the 32bits bias
is loaded into it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It was useful to (accidentally?) spot an overflow in the column pass
of the x86 simple_idct10 implementation.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
omse goes from 0.03060703 (which fails for dct-test) to 0.01663750.
This also actually improve the error of decoding the sample generated
by fate-vsynth3-dnxhd1080i-10bit using simple_idct10 to FAANI, which
goes (when resampled to yuv422p) from:
stddev: 0.06 PSNR: 72.28 MAXDIFF: 1
to identical.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should be reused for a generic simple_idct10 function.
Requires a bit of trickery to declare common constants in C.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Includes escapes that should now be supported and a few features not yet
fully supported, like comments, regions, classes, ruby, and lang.
All were tested with https://quuz.org/webvtt/ for validation, except
regions because the validator doesn't support them yet, and I couldn't
find any other way to validate WebVTT.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Bare ampersand characters are still accepted, even though out-of-spec.
Also fixes adjacent tags not being parsed.
Fixes trac #4915
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
This commit adds the ability for a profile to set the default
options, as well as for the user to override such options
by simply stating them in the command line while still keeping
the same profile, as long as those options are still permitted by
the profile.
Example: setting the profile to aac_low (the default) will turn
PNS and IS on. They can be disabled by -aac_pns 0 and -aac_is 0,
respectively. Turning on -aac_pred 1 will cause the profile to be
elevated to aac_main, as long as no options forbidding aac_main
have been entered (like AAC-LTP, which will be pushed soon).
A useful feature is that by setting the profile to mpeg2_aac_low,
all MPEG4 features will be disabled and if the user tries to enable
them then the program will exit with an error. This profile is
signalled with the same bitstream as aac_low (MPEG4) but some devices
and decoders will fail if any MPEG4 features have been enabled.
It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>
This commit implements support for 7.1 channel audio. There's no
more predefined bitstream channel mappings so going beyond 8 channels
(and 7 channels exactly) will require programmable channel elements,
which is already underway.
The bulk of calls to quantize_band_cost are replaced
by a call to a version that memoizes, greatly improving
performance, since during coefficient search there is
a great deal of repeat work.
Memoization cannot always be applied, so do this in a
different function, and leave the original as-is.
Intermediate results can indeed violate SF delta. Instead of asserting
there, just make the code safe, and assert on the final result.
Also re-clamp SFs more often in short windows (which tend to violate
the restriction when encoding the switch from one window to the other)
It was merged with the iff_ilbm decoder in commit
929a24efff.
Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This finalizes merging of the work in the patches in ticket #2686.
Improvements to twoloop and RC logic are extensive.
The non-exhaustive list of twoloop improvments includes:
- Tweaks to distortion limits on the RD optimization phase of twoloop
- Deeper search in twoloop
- PNS information marking to let twoloop decide when to use it
(turned out having the decision made separately wasn't working)
- Tonal band detection and priorization
- Better band energy conservation rules
- Strict hole avoidance
For rate control:
- Use psymodel's bit allocation to allow proper use of the bit
reservoir. Don't work against the bit reservoir by moving lambda
in the opposite direction when psymodel decides to allocate more/less
bits to a frame.
- Retry the encode if the effective rate lies outside a reasonable
margin of psymodel's allocation or the selected ABR.
- Log average lambda at the end. Useful info for everyone, but especially
for tuning of the various encoder constants that relate to lambda
feedback.
Psy:
- Do not apply lowpass with a FIR filter, instead just let the coder
zero bands above the cutoff. The FIR filter induces group delay,
and while zeroing bands causes ripple, it's lost in the quantization
noise.
- Experimental VBR bit allocation code
- Tweak automatic lowpass filter threshold to maximize audio bandwidth
at all bitrates while still providing acceptable, stable quality.
I/S:
- Phase decision fixes. Unrelated to #2686, but the bugs only surfaced
when the merge was finalized. Measure I/S band energy accounting for
phase, and prevent I/S and M/S from being applied both.
PNS:
- Avoid marking short bands with PNS when they're part of a window
group in which there's a large variation of energy from one window
to the next. PNS can't preserve those and the effect is extremely
noticeable.
M/S:
- Implement BMLD protection similar to the specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Since M/S decision
doesn't conform to section 6.1, a different method had to be
implemented, but should provide equivalent protection.
- Move the decision logic closer to the method specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Specifically,
make sure M/S needs less bits than dual stereo.
- Don't apply M/S in bands that are using I/S
Now, this of course needed adjustments in the compare targets and
fuzz factors of the AAC encoder's fate tests, but if wondering why
the targets go up (more distortion), consider the previous coder
was using too many bits on LF content (far more than required by
psy), and thus those signals will now be more distorted, not less.
The extra distortion isn't audible though, I carried extensive
ABX testing to make sure.
A very similar patch was also extensively tested by Kamendo2 in
the context of #2686.
This adds av_warn_unused_result whenever it is relevant.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Fixes Ticket4922.
Commit 060102389e broke configure, since
the inversion ! was missed while converting the grep to a case
statement.
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
