typo fixes

Originally committed as revision 12449 to svn://svn.ffmpeg.org/ffmpeg/trunk

libavcodec/h263.c

@@ -3202,7 +3202,7 @@ static int mpeg4_decode_video_packet_header(MpegEncContext *s)
     }
     if(s->pict_type == FF_B_TYPE){
         while(s->next_picture.mbskip_table[ s->mb_index2xy[ mb_num ] ]) mb_num++;
-        if(mb_num >= s->mb_num) return -1; // slice contains just skipped MBs which where allready decoded
+        if(mb_num >= s->mb_num) return -1; // slice contains just skipped MBs which where already decoded
     }
 
     s->mb_x= mb_num % s->mb_width;

libavcodec/mpegvideo.c

@@ -862,7 +862,7 @@ alloc:
         }
 
         if(s->current_picture_ptr && s->current_picture_ptr->data[0]==NULL)
-            pic= (AVFrame*)s->current_picture_ptr; //we allready have a unused image (maybe it was set before reading the header)
+            pic= (AVFrame*)s->current_picture_ptr; //we already have a unused image (maybe it was set before reading the header)
         else{
             i= ff_find_unused_picture(s, 0);
             pic= (AVFrame*)&s->picture[i];

libavcodec/mpegvideo_enc.c

@@ -1375,7 +1375,7 @@ static inline void dct_single_coeff_elimination(MpegEncContext *s, int n, int th
     }else
         skip_dc=1;
 
-    /* are all which we could set to zero are allready zero? */
+    /* Are all we could set to zero already zero? */
     if(last_index<=skip_dc - 1) return;
 
     for(i=0; i<=last_index; i++){

libavdevice/x11grab.c

@@ -299,7 +299,7 @@ apply_masks(uint8_t *dst, int and, int or, int bits_per_pixel)
 /**
  * Paints a mouse pointer in an X11 image.
  *
- * @param image Image where to paint the mouse pointer
+ * @param image image to paint the mouse pointer to
  * @param s context used to retrieve original grabbing rectangle
  *          coordinates
  * @param x Mouse pointer coordinate

libavformat/nutdec.c

@@ -111,7 +111,7 @@ static uint64_t find_any_startcode(ByteIOContext *bc, int64_t pos){
     uint64_t state=0;
 
     if(pos >= 0)
-        url_fseek(bc, pos, SEEK_SET); //note, this may fail if the stream is not seekable, but that should not matter, as in this case we simply start where we are currently
+        url_fseek(bc, pos, SEEK_SET); //note, this may fail if the stream is not seekable, but that should not matter, as in this case we simply start where we currently are
 
     while(!url_feof(bc)){
         state= (state<<8) | get_byte(bc);

libavformat/rtpdec.c

@@ -318,7 +318,7 @@ static int rtp_parse_mp4_au(RTPDemuxContext *s, const uint8_t *buf)
     if (infos == NULL)
         return -1;
 
-    /* decode the first 2 bytes where are stored the AUHeader sections
+    /* decode the first 2 bytes where the AUHeader sections are stored
        length in bits */
     au_headers_length = AV_RB16(buf);
 

libavformat/utils.c

@@ -1990,7 +1990,7 @@ int av_find_stream_info(AVFormatContext *ic)
         count++;
     }
 
-    // close codecs which where opened in try_decode_frame()
+    // close codecs which were opened in try_decode_frame()
     for(i=0;i<ic->nb_streams;i++) {
         st = ic->streams[i];
         if(st->codec->codec)

libpostproc/postprocess.c

@@ -392,7 +392,7 @@ static inline void doHorizLowPass_C(uint8_t dst[], int stride, PPContext *c)
 /**
  * Experimental Filter 1 (Horizontal)
  * will not damage linear gradients
- * Flat blocks should look like they where passed through the (1,1,2,2,4,2,2,1,1) 9-Tap filter
+ * Flat blocks should look like they were passed through the (1,1,2,2,4,2,2,1,1) 9-Tap filter
  * can only smooth blocks at the expected locations (it cannot smooth them if they did move)
  * MMX2 version does correct clipping C version does not
  * not identical with the vertical one

libpostproc/postprocess_template.c

@@ -478,7 +478,7 @@ static inline void RENAME(vertRK1Filter)(uint8_t *src, int stride, int QP)
 /**
  * Experimental Filter 1
  * will not damage linear gradients
- * Flat blocks should look like they where passed through the (1,1,2,2,4,2,2,1,1) 9-Tap filter
+ * Flat blocks should look like they were passed through the (1,1,2,2,4,2,2,1,1) 9-Tap filter
  * can only smooth blocks at the expected locations (it cannot smooth them if they did move)
  * MMX2 version does correct clipping C version does not
  */
@@ -1546,7 +1546,7 @@ DERING_CORE((%0, %1, 8)    ,(%%REGd, %1, 4),%%mm2,%%mm4,%%mm0,%%mm3,%%mm5,%%mm1,
 /**
  * Deinterlaces the given block by linearly interpolating every second line.
  * will be called for every 8x8 block and can read & write from line 4-15
- * lines 0-3 have been passed through the deblock / dering filters allready, but can be read too
+ * lines 0-3 have been passed through the deblock / dering filters already, but can be read, too.
  * lines 4-12 will be read into the deblocking filter and should be deinterlaced
  */
 static inline void RENAME(deInterlaceInterpolateLinear)(uint8_t src[], int stride)
@@ -1598,7 +1598,7 @@ static inline void RENAME(deInterlaceInterpolateLinear)(uint8_t src[], int strid
 /**
  * Deinterlaces the given block by cubic interpolating every second line.
  * will be called for every 8x8 block and can read & write from line 4-15
- * lines 0-3 have been passed through the deblock / dering filters allready, but can be read too
+ * lines 0-3 have been passed through the deblock / dering filters already, but can be read, too.
  * lines 4-12 will be read into the deblocking filter and should be deinterlaced
  * this filter will read lines 3-15 and write 7-13
  */
@@ -1663,7 +1663,7 @@ DEINT_CUBIC((%%REGd, %1), (%0, %1, 8) , (%%REGd, %1, 4), (%%REGc)    , (%%REGc,
 /**
  * Deinterlaces the given block by filtering every second line with a (-1 4 2 4 -1) filter.
  * will be called for every 8x8 block and can read & write from line 4-15
- * lines 0-3 have been passed through the deblock / dering filters allready, but can be read too
+ * lines 0-3 have been passed through the deblock / dering filters already, but can be read, too.
  * lines 4-12 will be read into the deblocking filter and should be deinterlaced
  * this filter will read lines 4-13 and write 5-11
  */
@@ -1743,7 +1743,7 @@ DEINT_FF((%%REGd, %1), (%%REGd, %1, 2), (%0, %1, 8) , (%%REGd, %1, 4))
 /**
  * Deinterlaces the given block by filtering every line with a (-1 2 6 2 -1) filter.
  * will be called for every 8x8 block and can read & write from line 4-15
- * lines 0-3 have been passed through the deblock / dering filters allready, but can be read too
+ * lines 0-3 have been passed through the deblock / dering filters already, but can be read, too.
  * lines 4-12 will be read into the deblocking filter and should be deinterlaced
  * this filter will read lines 4-13 and write 4-11
  */
@@ -1845,7 +1845,7 @@ DEINT_L5(%%mm1, %%mm0, (%%REGd, %1, 2), (%0, %1, 8)    , (%%REGd, %1, 4))
 /**
  * Deinterlaces the given block by filtering all lines with a (1 2 1) filter.
  * will be called for every 8x8 block and can read & write from line 4-15
- * lines 0-3 have been passed through the deblock / dering filters allready, but can be read too
+ * lines 0-3 have been passed through the deblock / dering filters already, but can be read, too.
  * lines 4-12 will be read into the deblocking filter and should be deinterlaced
  * this filter will read lines 4-13 and write 4-11
  */
@@ -1947,7 +1947,7 @@ static inline void RENAME(deInterlaceBlendLinear)(uint8_t src[], int stride, uin
 /**
  * Deinterlaces the given block by applying a median filter to every second line.
  * will be called for every 8x8 block and can read & write from line 4-15,
- * lines 0-3 have been passed through the deblock / dering filters allready, but can be read too
+ * lines 0-3 have been passed through the deblock / dering filters already, but can be read, too.
  * lines 4-12 will be read into the deblocking filter and should be deinterlaced
  */
 static inline void RENAME(deInterlaceMedian)(uint8_t src[], int stride)